Instrukcja obsługi La Crosse Technology TX233RW

La Crosse Technology Niesklasyfikowane TX233RW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology TX233RW (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Model: TX233RW
DC: 111116
Multi-sensor
Wind Direction | Wind Speed | Rain
RESET
Drain vents for rain
sensor
Reset
button
Red LED
Light
Drain holes for
multi sensor
Rain funnel
(collector)
Wind
cups
Batteries
3-AA
Directional
Vane
Features
• Wind direction
• Wind speed
• Rainfall
• Solar Panel for extended
battery life
• Replaceable directional vane
• Replaceable wind cups
• Self-emptying rain sensor
• Updates every 30 seconds
Power
• Requires 3-AA batteries for operation.
• Solar panel extends battery life but cannot operate multi-sensor alone.
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on at side of stem
Replace Directional Vane
1. Loosen the screw on side of vane
2. Remove direction vane
3. Install new vane
4. Tighten screw on at side of stem
Clean Rain Sensor
1. Remove rain funnel (pull at side rmly upward).
2. Gently remove debris or insects inside the rain sensor.
3. Clear debris from drain vents.
4. Clear debris from the rain funnel.
5. Reinstall the rain funnel.
Note: Do not oil the rain sensor.
Mounting
TX231RW Multi-sensor
• Mount in an open area clear for 50 feet in all directions.
• Mount with the solar panel facing south, so the wind direction is
correct. See N, S, E W, embossed on the top of the sensor.
• Use the bubble level on the top of the sensor to ensure it is level, for
accurate rainfall readings.
• The maximum wireless transmission range to the station is over 330
feet (100 meters) in open air, not including walls or trees.
• Cups should be on the top of the sensor.
• Attach to mounting surface with screws through the mounting bracket.
• The sensor can be mounted from the bottom or from the side.
Alternatively:
• Insert your own mounting pole into the sensor base.
• Tighten screws
• Mounting bracket would not be used.
Bubble
Level
Sensor ID Number
• Each sensor has a unique ID number on a sticker inside the battery
compartment.
• See instructions with the weather station for viewing the ID number on
the station or to replace an existing sensor.
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support with questions or visit our online help:
Phone: 1-608-782-1610
Online Product Support and Registration: www.lacrossetechnology.com/support
View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modications
to this
equipment. Such changes or modications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for
this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and corrections are included in subsequent edi-
tions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Specications
• Wind Speed Range: 0-111.8 mph (0-180 kMh)
• Wind Direction: 0-359 degrees
• Rainfall: 0-393.7 inches (0-9999 mm)
• Update interval: About every 30 seconds
• Transmission Range: 330 ft (100 m) RF 915MHz open air
• Batteries: 3-AA, IEC, LR6 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 13.62” W x 13” H x 5.16” D in (345.95 x 330.20 x 131.06 mm)

Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Niesklasyfikowane
Model: TX233RW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology TX233RW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane La Crosse Technology

La Crosse Technology

La Crosse Technology 308-1425B Instrukcja

12 Października 2024
La Crosse Technology

La Crosse Technology V16-TH2-3 Instrukcja

7 Października 2024
La Crosse Technology

La Crosse Technology 308-1425BCA Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX55U-IT Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX141V4 Instrukcja

30 Września 2024
La Crosse Technology

La Crosse Technology 724-1409 Instrukcja

29 Września 2024
La Crosse Technology

La Crosse Technology LTV-WSDTH04 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology CA85176 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology TX145W Instrukcja

22 Września 2024
La Crosse Technology

La Crosse Technology LTV-THP1-T1 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024