Instrukcja obsługi La Crosse Technology TX141W

La Crosse Technology Niesklasyfikowane TX141W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology TX141W (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Wind Speed | Temperature | Humidity
Features
• Wind speed
• Replaceable wind cups
• Temperature | Humidity
• Updates every 30 seconds
• Red LED ashes with each transmission
1. Twist battery cover left to remove from sensor.
2. Insert two “C” batteries into the TX141W sensor
Twist
Left
Power
Wind Cups
Air Vents
Battery cover
Mounting Pole
Mounting Bracket
C
C
Red LED
Model: TX141W
DC: 030817
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on at side of stem
Specications
• Wind Speed Range: 0 - 99 mph (0-159 kMh)
• Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Humidity Range: 10% - 99% (RH)
• Transmission Range: 330 ft (100 m) RF 433MHz open air
• Batteries: 2-C, IEC, LR14 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 18.57” H x 7.10” W x 7.10” D
(471.68 x 180.34 x 180.34 mm)
Flat Side Of
Stem Up
Insert and Attach
Flat End up
• For the most accurate wind speed readings, mount the TX141W
sensor as the highest object for 50 feet in all directions.
• Cups should be on the top of the sensor. Mount vertically.
• The maximum wireless transmission range to the wind station is
over 330 feet (100 meters) in open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting bracket to attach.
6. The sensor can be mounted from the bottom or side.
Alternatively:
1. Insert your own mounting pole into
the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Note: Do not attempt to insert a pole into the hollow back of the
mounting bracket.
Position Wind Sensor
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this
product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support or visit our online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support/
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modications
to this
equipment. Such changes or modications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and corrections are included in subsequent edi-
tions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.

Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Niesklasyfikowane
Model: TX141W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology TX141W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane La Crosse Technology

La Crosse Technology

La Crosse Technology 308-1425B Instrukcja

12 Października 2024
La Crosse Technology

La Crosse Technology V16-TH2-3 Instrukcja

7 Października 2024
La Crosse Technology

La Crosse Technology 308-1425BCA Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX55U-IT Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX141V4 Instrukcja

30 Września 2024
La Crosse Technology

La Crosse Technology 724-1409 Instrukcja

29 Września 2024
La Crosse Technology

La Crosse Technology LTV-WSDTH04 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology CA85176 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology TX145W Instrukcja

22 Września 2024
La Crosse Technology

La Crosse Technology LTV-THP1-T1 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024