Instrukcja obsługi La Crosse Technology TX141TH-BV4

La Crosse Technology nieskategoryzowany TX141TH-BV4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology TX141TH-BV4 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
W I R E L ESS
TE M P E R ATU R E / H U M I D I T Y S E N S O R
Model: TX141TH-Bv4
DC: 092021
WA R R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this 1-year limited time warranty
product relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CAR E + M A I N T E N A N C E
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
F C C S TAT E M E N T
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any responsibility for any technical error
or printing error, or their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to
the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov View online at: bit.ly/tx141th-bv4
Page | 4
Power up
Insert 2-AA batteries into your Outdoor Sensor. Option 1:
• Install one mounting screw into a wall.
• Place the transmitter onto the screw.
Option 2:
• Insert the mounting screw through the front of the sensor and into
the wall.
• Tighten the screw to snug (do not over tighten).
• Mount the temperature sensor on a north-facing wall or in any
well shaded location. Sun will make it read high.
• Under an eave or deck rail is preferred.
• Be sure the outdoor sensor is mounted vertically to drain
moisture.
• The maximum wireless transmission range to the weather station
is over 330 feet (100 meters) in open air, not including walls or
floors.
Watch sensor mounting video: bit.ly/TH_SensorMounting
Refer to the owner’s manual for your clock or weather station to
see if you can Search for Sensor. If so, enable a search and press
the TX button (transmission) on your sensor.
If there is no Search option, try this:
1. Bring your sensor inside next to the station and remove
batteries from both devices.
2. Press any button at least 20 times, and then wait 15 minutes.
3. After the wait, install fresh batteries into both your sensor and
station. Your outdoor temperature should return within the next
few minutes.
4. Keep your sensor next to the station for another 15 minutes to
establish a strong connection.
5. Once connection is reestablished, place sensor outside in a
shaded location.
Power up as a Replacement Sensor
Position Sensor
Specications
Temperature range: -40°F to 140°F (-40 °C to 60 °C)
Humidity range: 10%-99% RH
Transmission range: Up to 330 feet
Transmission frequency: 433 MHz
Power requirements: 2 “AA” Alkaline batteries (not included)
Dimensions: 1.58” L x 0.83” W x 5.08” H
Page | 2 Page | 3
AA
AA
TX button
(Transmission
LED

Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: nieskategoryzowany
Model: TX141TH-BV4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology TX141TH-BV4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany La Crosse Technology

La Crosse Technology

La Crosse Technology 911-114 Instrukcja

28 Maja 2024
La Crosse Technology

La Crosse Technology TX141TH-BV4 Instrukcja

27 Maja 2024
La Crosse Technology

La Crosse Technology LTV-W1 Instrukcja

18 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024