Instrukcja obsługi La Crosse Technology TX141TH-BCH

La Crosse Technology Niesklasyfikowane TX141TH-BCH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology TX141TH-BCH (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Model: TX141TH-ACH | TX141TH-BCH
DC: 112116
Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903
Thermo-hygro Sensor
433MHz
AA
AA
TX button
(Transmission
LED
Features
• Temperature
• Humidity
• Red LED ashes when transmitting.
• Channel selector
1 2 3
1 2 3
Channel
Selector
Power
• Requires 2-AA batteries for operation.
Mounting
Specications
• Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Humidity Range: 10% to 99% RH
• Update interval: About every 58 seconds
• Transmission Range: 300 ft (91 meters)
• Batteries: 2-AA, IEC, LR6 batteries (not included)
• Battery Life: over 24 month with reputable batteries
• Dimensions: 1.57” W x 5.12” T x 0.79” D (4.0cm W x 13.0cm T x 2.0cm D)
• Transmits Temperature | Humidity every 58 seconds.
• Red LED light will ash when transmission occurs.
Temperature | Humidity
Option 1:
• Install one mounting screw into a wall.
• Place the transmitter onto the screw.
Option 2:
• Insert the mounting screw through the front of the sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
• Mount the temperature/humidity sensor on a north-facing wall or in any well
shaded location. Sun will make it read high.
• Under an eave or deck rail is preferred.
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• The maximum wireless transmission range to the weather station is over
300 feet (91 meters) in open air, not including walls or oors.
• La Crosse Technology products are designed to work best with a name brand battery. Good
name brand batteries make less noise, which reduces the chance of RF interference from the
battery compartment.
• Avoid a battery without an expiration date. These batteries will produce more RF noise.
• Alkaline or Lithium batteries can be used in sensors. Only use Alkaline batteries in clocks or
weather stations.
• Use batteries dated six years or more in advance of the current year. Batteries are often dated
to expire 10 years from their manufacture date.
• Batteries dated earlier than 6 years from now may still work, but may be unstable in
performance.
• If you have a voltmeter that reads numerically, a minimum voltage of 1.48V for each battery
is necessary for proper performance in our products.
Battery usage - Tips and Information:
Channels
• Use the channel selector to set your sensor on channel 1, 2, or 3 if your station can
read multiple sensors.
• Transmission icon and red LED light will ash when transmission occurs.
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this
product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support with questions or visit our online
help:
Phone: 1-608-782-1610
Online Product Support and Registration: www.lacrossetechnology.com/support
View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or
modications to this
equipment. Such changes or modications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the anten-
na(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or pro-
cessed using
electronic, mechanical or chemical process without the written permission of the publisher. This book-
let may contain errors or misprints. The information it contains is regularly checked and corrections are
included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences.
All trademarks and patents are recognized.

Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Niesklasyfikowane
Model: TX141TH-BCH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology TX141TH-BCH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane La Crosse Technology

La Crosse Technology

La Crosse Technology 308-1425B Instrukcja

12 Października 2024
La Crosse Technology

La Crosse Technology V16-TH2-3 Instrukcja

7 Października 2024
La Crosse Technology

La Crosse Technology 308-1425BCA Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX55U-IT Instrukcja

4 Października 2024
La Crosse Technology

La Crosse Technology TX141V4 Instrukcja

30 Września 2024
La Crosse Technology

La Crosse Technology 724-1409 Instrukcja

29 Września 2024
La Crosse Technology

La Crosse Technology LTV-WSDTH04 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology CA85176 Instrukcja

23 Września 2024
La Crosse Technology

La Crosse Technology TX145W Instrukcja

22 Września 2024
La Crosse Technology

La Crosse Technology LTV-THP1-T1 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024