Instrukcja obsługi La Crosse Technology 70940

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology 70940 (2 stron) w kategorii radiobudzik. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Page 3Page 2
Silicon LCD Alarm Clock
Model: 70940
DC: 020824
Power Up
Insert 2 “AA” alkaline batteries (not included) according to polarity
symbols.
Set Time
Continuously hold down the TIME SET button while setting your
hour and minutes.
1. While holding the TIME SET button, press and release the HR
button to set the hour. Observe the AM/PM symbols.
2. While holding the TIME SET button, press and release the MIN
button to set the minutes.
3. When the correct time is shown on the display, release the TIME
SET button.
AA
AA
Alarm Time
Continuously hold down the ALARM SET button while setting
your hour and minutes.
1. While holding the ALARM SET button, press and release the HR
button to set the alarm hour. Observe the AM/PM symbols.
2. While holding the ALARM SET button, press and release the
MIN button to set the alarm minutes.
3. When the correct Alarm Time is shown on the display, release
the ALARM SET button.
Activate/Deactivate Alarm
Press and release the ALARM ON/OFF button to activate or
deactivate the alarm.
The Alarm Icon will show when the alarm is active.
Snooze
When the alarm sounds press and release the SNOOZE/LIGHT
button to silence the alarm for 8 minutes. Zz will show on the
display.
The snooze feature may be repeated.
Silence alarm for 24 hours
When the alarm sounds press and release the ALARM/STOP
button to silence the alarm for 24 hours.
Page 6Page 5Page 4
Made in China Printed in China
Please help in the preservation of the environment and return used
batteries to an authorized depot. Remove the battery from the clock if you
do not intend to use it for an extended period of time.
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
WARRANTY & SUPP O RT
Equity provides a 2-year limited warranty on this product from the date of consumer
purchase against defects for material and workmanship. During this period such
defects will be repaired, or the product will be replaced at Equity’s option, without
charge. This warranty does not cover damage caused by misuse or negligence.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts so the
above limitation may not apply to you. This warranty gives you specific legal rights
and you may
also have other rights which vary from state to state.
If your product is not working properly, please send: your product, a letter
explaining the problem, and $5.00 for postage and handling to:
Equity by La Crosse Warranty Department
2830 26 th St S.
La Crosse, WI 54601
POW E R R EQU I R E ME N TS & DI M E NS I ON S
Power: 2 “AA batteries (not included)
Battery Life: Over 12 months
Dimensions: 3.14” L x 2.44” W x 3.14” H (8.0 cm L x 6.2 cm W x 8.0 cm H)
Backlight
Press and release the SNOOZE/LIGHT button to activate the
backlight for 5 seconds.
Indoor Temperature Range: 14ºF to 122ºF (-10ºC to 50ºC)
Power: 2-AA Akaline Batteries (not included)
Dimensions: 5.25 in L x 3.75 in W x 4.00 in H
( 13.35 cm L x 9.52 cm W x 10.16 cm H)
Specifications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Increase separation between equipment & receiver.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or
modifications to this equipment. Such changes or modifications could void the user authority to operate
the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission of the
publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any responsibility for any technical error or
printing error, or their consequences. All trademarks and patents are recognized.
F CC S TAT E ME N T
WARNING: This product can expose you to chemicals including acrylonitrile,
1, 3-butadiene, and styrene, which are known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov
If you need support, Scan the QR code or visit:
bit.ly/contact_techsupport
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for the
intended use.
Always replace the whole set of batteries at one time, taking care not to mix old
and new ones, or batteries of dierent types.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from product during periods of non-use. Battery leakage can
cause corrosion and damage to this product.
Remove used batteries promptly.
For recycling and disposal of batteries, and to protect the environment, please
check the internet or your local phone directory for local recycling centers and/or
follow local government regulations.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
Care and Maintenance

Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: radiobudzik
Model: 70940

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology 70940, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą