Instrukcja obsługi La Crosse Technology 513-1211A
La Crosse Technology
Klok
513-1211A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology 513-1211A (4 stron) w kategorii Klok. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 1
Model: 1211.513 1211A513- -
Instruction Manual
DC: 081114
ATOMIC DIGITAL CLOCK
FRONT
VIEW
FOLDOUT
LEG
STAND
Battery
Compartment
3 “AA”
Time + Alarm
Calendar + Indoor Temperature
BACK
VIEW
TIME ZONE
SELECTOR
BUTTONS
Time Zone Indicator
Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 2
TIME ZONES
PST Pacific
MST Mountain
CST Central
EST Eastern
GET STARTED
Step 1: Use the time zone selector (on back) to choose your time zone.
Step 2: Insert 3 AA batteries (not included) into the clock. Observe the new
correct polarity.
Restart: If there is no indoor temperature data after 60 seconds remove ,
batteries from the clock and press a button 20 times. After15 minutes, return to
Step 1 above.
SET TIME, DATE AND TEMPERATURE
1. Hold the button to enter time set mode. SET
2. Press the WAVE/+ DST/ or - buttons to adjust values.
3. Press the button to confirm and move to the next item.SET
TIME SET ORDER:
1. 12/24 hour time format
2. Hour
3. Minutes
4. Year
5. Month
6. Date
Press the button to exit, or SET wait 20 seconds without pressing buttons to
return to the normal time display.
DAYLIGHT SAVING TIME SETTING
Hold the button for 3 seconds to select DST on or o. DST
The DST icon appears in above the seconds when DST is on.DST
TIME ZONE SELECTION
Slide the time zone selector bar on the back of the clock to
choose the time zone for your area.
FAHRENHEIT/CELSIUS
Hold the button for 3 seconds to select Fahrenheit or Celsius °C/°F
temperature readings.
SET TIME ALARM
Press the button once to enter Alarm Mode. The letters will show in the SET AL
seconds display.
1. Hold the button for 3 seconds to enter alarm time set SET
mode.
2. Press the WAVE/+ DST/ or - buttons to adjust values.
3. Press the button to confirm and move to the next item.SET
Alarm Time setting order: 1. Hours, 2. Minutes
Model: 513 1211/513 1211A- - www.lacrossetechnology.com/support Page | 3
Alarm
Bell Icon
Snooze
Icon
ACTIVATE/DEACTIVATE TIME ALARM
Press the button once to view alarm time.SET
Press the WAVE/+ DST/ or - buttons to activate the alarm.
Once activated, the bell icon appears.
Press the WAVE/+ DST/ or - buttons to deactivate the alarm.
The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
When alarm sounds, press the button to silence the SNOOZE
alarm for 5 minutes. The alarm icon will flash.
In snooze mode, press any button to stop alarm for one day.
Note: The alarm will sound for 2 minutes and then shut off completely.
MANUAL WWVB RADIO CONTROLLED (ATOMIC) TIME SEARCH-
Press the WAVE/+ button to start or stop a manual signal search. WWVB
Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH: The clock will search every 2 hours until the WWVB
time signal is received. After reception, this clock will only search for the atomic
signal after midnight.
ATOMIC CLOCK CARE AND MAINTENANCE
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed with correct polarity (+and -).
Remove batteries from equipment which is not to be used for an extended period.
Remove expired batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring agents.
The clock is not a toy. Keep it out of reach of children.
The clock is not to be used for medical purpose or for public information. It is intended
for home use only.
The specs of this clock may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
If the clock is not working properly, change the batteries.
SPECIFICATIONS
Temperature Range: +14 to +122 °F (- 10 to +50 °C)
Power: 3 AA, IEC, LR6 batteries (not included)-
Dimensions: 10.75" x 1.38" x 16.75" (273.05 x 30.052 x 425.45 mm)
WWVB
Atomic Icon
Specyfikacje produktu
| Marka: | La Crosse Technology |
| Kategoria: | Klok |
| Model: | 513-1211A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z La Crosse Technology 513-1211A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Klok La Crosse Technology
6 Września 2024
6 Września 2024
5 Września 2024
3 Września 2024
1 Września 2024
1 Września 2024
31 Sierpnia 2024
30 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
Instrukcje Klok
- Klok Braun
- Klok Lenovo
- Klok Livoo
- Klok Nedis
- Klok Casio
- Klok Citizen
- Klok ECG
- Klok Krontaler
- Klok TFA
- Klok Auriol
- Klok Techno Line
- Klok Velleman
- Klok ART
- Klok Oregon Scientific
- Klok Elro
- Klok Hama
- Klok Hager
- Klok Trevi
- Klok Alecto
- Klok Fysic
- Klok Ascot
- Klok Ecom
- Klok Karlsson
- Klok Cresta
- Klok GlobalTronics
- Klok AcuRite
- Klok Fisher Price
- Klok Technoline
- Klok Balance Time
- Klok Chacon
- Klok Irox
- Klok Konig
- Klok Glunz
- Klok BBrain
- Klok Sempre
- Klok ASA
- Klok TFA Dostmann
- Klok Kogan
- Klok Equity
- Klok Focus Electrics
Najnowsze instrukcje dla Klok
19 Września 2024
18 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024