Instrukcja obsługi Krüger&Matz Flow 4+

Krüger&Matz smartfon Flow 4+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Krüger&Matz Flow 4+ (138 stron) w kategorii smartfon. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/138

Camera User Guide

Camera User GuideCamera User Guide

This guide explains camera features and procedures in detail.

Before Using the Camera

Shooting

Playback/Erasing

Print/Transfer Settings

Viewing Images on a TV set

Troubleshooting

List of Messages

Appendix

Advanced

AdvancedAdvanced

ENGLISH

Main Features

Shooting

z6x optical zoom with shift-method image stabilizer

zAvoid the effects of camera shake or blurry subjects when

shooting by using a high ISO speed

zAutomatically adjusts shooting settings to match particular

conditions

zChanges specific image colors to shoot (Color Accent, Color

Swap)

zUse the separately sold wide converter, tele-converter, close-

up lens or waterproof case when shooting

Playback

Plays back automatically

using the Auto Play function

Editing

zAdds effects to still images

with My Colors

Printing

zMakes printing easy with

the Print/Share button

zAlso supports non-Canon

brand PictBridge compliant

printers

Uses of Recorded Images

zEffortlessly transfer them to a computer with the Print/Share

button

Conventions Used in this Guide

Icons appearing next to or below titles indicate the shooting

modes in which the procedure can be used.

See Functions Available in Each Shooting Mode .(p. 134)

zIn this guide, the Basic Camera User Guide is referred to as the

Basic Guide, and the Advanced Camera User Guide is referred

to as the Advanced Guide.

This mark denotes issues that may affect the camera’s

operation.

This mark denotes additional topics that complement the

basic operating procedures.

You can use SD memory cards, SDHC memory cards and

MultiMediaCards with this camera.

These cards are collectively called memory cards in this guide.

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when

used with genuine Canon accessories. Canon shall not be liable

for any damage to this product and/or accidents such as fire, etc.,

caused by the malfunction of non-genuine Canon accessories

(e.g., a leakage and/or explosion of a battery pack). Please note

that this warranty does not apply to repairs arising out of the

malfunction of non-genuine Canon accessories, although you

may request such repairs on a chargeable basis.

* Unavailable shooting modes are shown grayed out.

Postcard Mode

Shooting Mode

Mode switch

Items marked with a  are lists or charts that summarize camera

functions or procedures.

Please Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Information Displayed on the LCD Monitor . . . . . . . . . . . . . . 13

Using the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Menus and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Menu List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Resetting Settings to Their Default Values. . . . . . . . . . . . . . . 25

Formatting Memory Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Changing the Recording Pixels and Compression

(Still Images) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting the Image Stabilizer Function. . . . . . . . . . . . . . . . . . . 28

Using the Digital Zoom/Digital Tele-Converter . . . . . . . . . . . . 29

Continuous Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Postcard Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Embedding the Date in the Image Data . . . . . . . . . . . . . . . 33

Setting the Display Overlays . . . . . . . . . . . . . . . . . . . . . . . . . 34

Movie Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Shooting Panoramic Images (Stitch Assist) . . . . . . . . . . . 39

Program AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting the Aperture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Manually Setting the Shutter Speed and Aperture . . . . . . 43

Selecting an AF Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock,

Manual Focus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Locking the Exposure Setting (AE Lock) . . . . . . . . . . . . . . . . 48

Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Before Using the Camera – Basic Operations . . . . . . . . 12

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27



Table of Contents

Locking the Flash Exposure Setting (FE Lock) . . . . . . . . . . . .49

Switching between Metering Modes . . . . . . . . . . . . . . . . . . . .50

Adjusting the Exposure Compensation . . . . . . . . . . . . . . .51

Adjusting the Tone (White Balance) . . . . . . . . . . . . . . . . . . . .52

Shooting in a My Colors Mode . . . . . . . . . . . . . . . . . . . . . . . .55

Changing the Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Adjusting the ISO Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Switching between Flash Adjustment Settings . . . . . . . . . . . .63

Compensating the Flash Adjustment / Flash Output. . . . . . . .63

Switching the Timing at which the Flash Fires . . . . . . . . . . . .64

Setting the Auto Rotate Function . . . . . . . . . . . . . . . . . . . . . .65

Creating an Image Destination (Folder) . . . . . . . . . . . . . . . . .66

Resetting the File Number . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Magnifying Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Viewing Images in Sets of Nine (Index Playback) . . . . . .71

Jumping to Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Viewing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Editing Movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Rotating Images in the Display . . . . . . . . . . . . . . . . . . . . . . . .76

Adding My Colors Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Attaching Sound Memos to Images . . . . . . . . . . . . . . . . . . . .79

Automated Playback (Auto Play) . . . . . . . . . . . . . . . . . . . . . .80

Protecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Erasing All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Setting the DPOF Print Settings . . . . . . . . . . . . . . . . . . . . . . .83

Setting the DPOF Transfer Settings . . . . . . . . . . . . . . . . . . . .86

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

When the power is turned on . . . . . . . . . . . . . . . . . . . . . . . . .89

LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Shooting movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Playback/Erasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Print Settings/Transfer Settings. . . . . . . . . . . . . . . . . . . .83

Viewing Images on a TV set . . . . . . . . . . . . . . . . . . . . . . . 88

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

TV monitor output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Printing with a direct print compatible printer . . . . . . . . . . . . . 98

Battery Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Handling the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . 105

Using the Power Kits (Sold Separately) . . . . . . . . . . . . . . . . 107

Using the Lenses (Sold Separately). . . . . . . . . . . . . . . . . . . 110

Using an Externally Mounted Flash (Sold Separately). . . . . 114

Replacing the Date Battery . . . . . . . . . . . . . . . . . . . . . . . . . 116

Camera Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . 118

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Functions Available in Each Shooting Mode . . . . . . 134



Handling Precautions

Test Shots

Before you try to photograph important subjects, we highly

recommend that you shoot several trial images to confirm that the

camera is operating and being operated correctly.

Please note that Canon Inc., its subsidiaries and affiliates, and its

distributors are not liable for any consequential damages arising

from any malfunction of a camera or accessory, including memory

cards, that results in the failure of an image to be recorded or to be

recorded in a way that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal

use and should never be used in a manner that infringes upon or

contravenes international or domestic copyright laws and

regulations. Please be advised that in certain cases the copying of

images from performances, exhibitions, or commercial properties

by means of a camera or other device may contravene copyright or

other legal rights even if the image was shot for personal use.

Warranty Limitations

For information on your camera's warranty, please refer to the

Canon European Warranty System (EWS) Booklet supplied with

your camera.

For Canon Customer Support contacts, please see the rear of

the European Warranty System (EWS) Booklet.

Please Read

Video Format

Please set the camera’s video signal format to the one used in your

region before using it with a TV monitor (p. 88).

Language Setting

Please see the Basic Guide (p. 7) to change the language setting.

zBefore using the camera, please ensure that you read the safety

precautions described below and in the “Safety Precautions”

section of the Basic Camera User Guide. Always ensure that the

camera is operated correctly.

zThe safety precautions noted on the following pages are intended

to instruct you in the safe and correct operation of the camera and

its accessories to prevent injuries or damage to yourself, other

persons and equipment.

zEquipment refers to the camera, battery, battery charger (sold

separately) and compact power adapter (sold separately).

Camera Body Temperature

If your camera is used for prolonged periods, the camera body

may become warm. Please be aware of this and take care when

operating the camera for an extended period.

About the LCD Monitor

The LCD monitor is produced with extremely high-precision

manufacturing techniques. More than 99.99% of the pixels

operate to specification. Less than 0.01% of the pixels may

occasionally misfire or appear as red or black dots. This has no

effect on the recorded image and does not constitute a

malfunction.

Safety Precautions

Warnings

Equipment

zz Do not look directly into the sun or at bright light sources

through the camera's viewfinder.

Doing so can damage your eyesight.

Store this equipment out of the reach of children and infants.

Accidental damage by a child could result in serious injury.

• Wrist strap: Placement of the strap around the child’s neck could

result in asphyxiation.

• Memory card: It may be swallowed accidentally. If this occurs,

contact a doctor immediately.

zz Do not attempt to disassemble or alter any part of the

equipment that is not expressly described in this guide.

To avoid the risk of high-voltage electrical shock, do not touch

the flash portion of the camera if it has been damaged.

zz Stop operating the equipment immediately if it emits smoke

or noxious fumes.

zz Do not allow the equipment to come into contact with, or

become immersed in, water or other liquids. If the exterior

comes into contact with liquids or salt air, wipe it dry with a

soft, absorbent cloth.

Continued use of the equipment may result in fire or electrical

shock. Immediately turn the camera power off and remove the

camera batteries or unplug the power code from the power outlet.

Please consult your camera distributor or the closest Canon

Customer Support Help Desk.

zz Do not use substances containing alcohol, benzine,

thinners or other flammable substances to clean or

maintain the equipment.

zz Do not cut, damage, alter or place heavy items on the power

cord.

zz Use only recommended power accessories.

zz Remove the power cord on a regular periodic basis and

wipe away the dust and dirt that collects on the plug, the

exterior of the power outlet and the surrounding area.

zz Do not handle the power cord if your hands are wet.

Continued use of the equipment may result in fire or electrical shock.

Battery

zz Do not place the batteries near a heat source or expose it to

direct flame or heat.

zz The batteries should not be immersed in water or sea water.

zz Do not attempt to disassemble, alter or apply heat to the

batteries.

zz Avoid dropping or subjecting the batteries to severe

impacts that could damage the casing.

zz Use only recommended batteries and accessories.

Use of batteries not expressly recommended for this equipment

may cause explosions or leaks, resulting in fire, injury and damage

to the surroundings. In the event that a battery leaks and the eyes,

mouth, skin or clothing contact these substances, immediately

flush with water and seek medical assistance.

zz Disconnect the battery charger and compact power adapter

from both the camera and the power outlet after recharging

or when not in use to avoid fire and other hazards.

zz Do not place anything, such as tablecloths, carpets,

bedding or cushions, on top of the battery charger while it

is charging.

Continued use over a long period may cause the units to overheat

and distort, resulting in fire.

zz When recharging the Canon AA-size NiMH batteries, use

only a specified battery charger.

zz The compact power adapter is designed for exclusive use

with this equipment. Do not use it with other products.

There is a risk of overheating and distortion which could result in

fire or electrical shock.

zz Before you discard a battery, cover the terminals with tape

or other insulators to prevent direct contact with other

objects.

Contact with the metallic components of other materials in waste

containers may lead to fire or explosions.

Others

zz Do not trigger the flash in close proximity to human or

animal eyes. Exposure to the intense light produced by the

flash may damage eyesight.

In particular, remain at least one meter (39 inches) away from

infants when using the flash.

zz Keep objects that are sensitive to magnetic fields (such as

credit cards) away from the speaker of the camera.

Such items may lose data or stop working.

zz Exercise due caution when screwing on the separately sold

wide converter, tele-converter, close-up lens and

conversion lens adapter.

If they loosen, fall off and shatter, the glass shards may cause

injury.

Cautions

Equipment

zz Be careful not to bang the camera or subject it to strong

impacts or shocks that could lead to injury or damage the

equipment when wearing or holding it by the strap.

zz Do not store the equipment in humid or dusty areas.

zz Do not allow metal objects (such as pins or keys) or dirt to

contact the charger terminals or plug.

Such conditions could lead to fire, electrical shock or other

damage.

zz Avoid using, placing or storing the equipment in places

subject to strong sunlight or high temperatures, such as the

dashboard or trunk (boot) of a car.

zz Do not use the equipment in a manner that exceeds the rated

capacity of the electrical outlet or wiring accessories. Or, do not

use the equipment if the cable or plug is damaged, or if the plug

is not fully inserted into the power outlet.

zz Do not use in locations with poor ventilation.

The above-mentioned can cause leakage, overheating or

explosion, resulting in fire, burns or other injuries. High

temperatures may also cause deformation of the casing.

zz When not using the camera for extended periods of time,

remove the batteries from the camera or battery charger

and store the equipment in a safe place.

If the batteries are left inside the camera, damage caused by

leakage may occur.

zz Do not connect compact power adapters or battery

chargers to devices such as electrical transformers for

foreign travel because it may lead to malfunctions,

excessive heat generation, fire, electric shock or injury.

Flash

zz Do not operate the flash with dirt, dust or other items stuck

to the surface of the flash.

zz Be careful not to cover the flash with your fingers or

clothing when shooting.

The flash may be damaged and emit smoke or noise. The resulting

heat build-up could damage the flash.

zz Do not touch the surface of the flash after taking several

pictures in rapid succession.

Doing so could result in burns.

Equipment

Preventing Malfunctions

Avoid Strong Magnetic Fields

zz Never place the camera in close proximity to electric motors

or other equipment generating strong electromagnetic

fields.

Exposure to strong magnetic fields may cause malfunctions or

corrupt image data.

Avoid Condensation Related Problems

zz When moving the equipment rapidly from cold to hot

temperatures, you can avoid condensation by placing the

equipment in an airtight, resealable plastic bag and letting it

adjust to temperature changes slowly before removing it

from the bag.

Moving the equipment rapidly from cold to hot temperatures may

cause condensation (water droplets) to form on its external and

internal surfaces.

If Condensation Forms Inside the Camera

zz Stop using the camera immediately.

Continued use may damage the equipment. Remove the memory

card and batteries or compact power adapter from the camera and

wait until the moisture evaporates completely before resuming use.

Before Using the Camera – Basic Operations

Night Display

When shooting in dark conditions, the camera automatically

brightens the LCD monitor to suit the brightness of the subject*,

making it easier to frame the subject.

* The movements of the subject will appear irregular in the LCD monitor. The

recorded image will not be affected. The brightness of the image displayed

in the monitor, and the brightness of the actual image recorded will be

different.

Using the LCD Monitor

1Press .

z The display mode changes as follows with each press.

z The shooting information displays for approximately 6 sec.

when a setting is changed, regardless of the selected

display mode.

z The LCD monitor on or off setting is retained even after the

camera power is turned off.

z The LCD monitor does not shut off in the ( , ),

or mode.

z The LCD monitor will not switch to the detailed display in the

index playback mode (p. 71).

Playback Mode ( )

No Information

Standard

Detailed

Shooting Mode ( )

Standard

(No Information)

Detailed

(Information View)

Off

Before Using the Camera – Basic Operations

Shooting Information (Shooting Mode)

* Appears even if the LCD monitor is set to Standard display.

Information Displayed on the LCD Monitor

Zoom Magnification* (p. 29)

Digital Tele-Converter* (p. 29)

• Stills: Recordable Shots

• Movies: Remaining Time/

Elapsed Time

* Spot AE Point Frame (p. 50) * AF Frame (p. 44)

* Low Battery (p. 103)

Grid Lines* (p. 21)

Recording Pixels (pp. 27 38),

* * * * * *

ISO Speed (p. 62)

White Balance (p. 52)

Compression (Still image)

(p. 28)

Metering Mode (p. 50)

Drive Mode

(p. 31, Basic Guide p. 16)

Frame Rate (Movies) (p. 38)

My Colors (p. 55)

Flash Exposure Compensation/

Flash Output (p. 63)

Shooting Mode

(Basic Guide pp. 10 – 11)

(pp. 57 – 61), (p. 39)

* * * * * (p. 35)

(pp. 40 – 43)

zRec* Movie Recording (p. 35)

Auto Rotate (p. 65)

Flash (Basic Guide p. 12)

Red-Eye Reduction

(Basic Guide p. 12)

* AF Lock (p. 46)/

Manual Focus (p. 47)

(Red)* Camera Shake

Warning (p. 14)

··· *

Exposure Compensation (p. 51)

* Macro (Basic Guide p. 15)

Shutter Speed* (p. 41)

Aperture Value* (p. 42)

* Create Folder (p. 66)

*AE Lock (p. 48)/

FE Lock (p. 49)

* * * * * *

Image Stabilizer (p. 28)

3:2 Guide* (p. 21)

Playback Information (Playback Mode)

Standard

If the indicator blinks orange and the camera shake warning

icon displays, this indicates that a slow shutter speed may

have been selected due to insufficient illumination. Use the

following methods to shoot:

- Set the IS mode to any setting other than [off] (p. 28)

- Raise the ISO speed (p. 62)

- Select a setting other than (flash off)

- Attach the camera to a tripod or other device

Shooting Date/Time

Displayed image number

Total number of images

Protection Status (p. 81)

WAVE Format Sound (p. 79)

Folder Number-File Number

Compression (Still Images) (p. 28)

Recording

Pixels (Still Images) (p. 27)

Movie (p. 35)

Before Using the Camera – Basic Operations

Detailed

The following information may also be displayed with some images.

A sound file in a format other than the WAVE format is attached

or the file format is not recognized.

JPEG image not conforming to Design rule for Camera File

System Standards (p. 120)

RAW image

Unrecognized data type

Recording Pixels/Frame Rate

(Movies) (p. 38)

Histogram Metering Mode (p. 50)

···

Exposure Compensation (p. 51)

ISO Speed (p. 62)

Aperture Value (p. 42)

Shutter Speed (p. 41)

White Balance (p. 52)

Flash Output (p. 63)

··· Flash Exposure

Compensation (p. 63)

Shooting Mode

(Basic Guide pp. 10 – 11)

(p. 39) (p. 35)

(pp. 40 – 43)

* * My Colors (p. 55)

AF Lock (p. 46)/Manual Focus

(p. 47)

Macro (Basic Guide p. 15)

Recording Pixels (Still Image) (p. 27)

Movie Length (Movies) (p. 35)

* Appears with images taken in the Color Accent or Color Swap shooting

modes.

File size

My Colors (Playback) (p. 77)

Image with a My Colors effect

(p. 77)

The viewfinder can be used to conserve power by turning the LCD

monitor off (p. 12) while shooting.

z Information for images shot on other cameras may not

display correctly.

z Overexposure Warning

In the following cases, overexposed portions of the image

blink.

- When reviewing an image right after shooting in the LCD

monitor (information view)

- When using the detailed display mode of the Playback

mode

Histogram Function

The histogram is a graph that allows you to check the brightness

of the image. The greater the bias toward the left in the graph, the

darker the image. The greater the bias toward the right, the

brighter the image.

If the image is too dark, adjust the exposure compensation to a

positive value. Similarly, adjust the exposure compensation to a

negative value if the image is too bright (p. 51).

Using the Viewfinder

Sample Histograms

Balanced ImageDark Image Bright Image

Before Using the Camera – Basic Operations

This camera is equipped with a power saving function. The power

will shut off in the following circumstances. Press the power button

again to restore power.

* This time can be changed.

Power Saving Function

Shooting Mode Powers down approximately 3 minutes after

the last control is accessed on the camera.

The LCD monitor automatically turns off 1

minute* after the last control is accessed

even if [Auto Power Down] is set to [Off].

Press any button other than the power button

or change the camera orientation to turn the

LCD monitor back on.

Playback Mode

Connected to a Printer

Powers down approximately 5 minutes after

the last control is accessed on the camera.

z The power saving function will not activate during an Auto

Play or while the camera is connected to a computer.

z The power saving function settings can be changed (p. 22).

Menus are used to set the shooting, playback and print settings as

well as such camera settings as the date/time and electronic beep.

The following menus are available.

zz FUNC. Menu

zz Rec., Play, Print, Set up and My Camera Menus

FUNC. Menu

Sets many of the functions commonly used during shooting.

aaSet the mode switch to (shooting).

bbPress the FUNC./SET button.

ccUse the or button to select a menu item.

• Some items may not be selectable in some shooting modes.

ddUse the or button to select an option for the menu

item.

• You can select further options with the MENU button for some

options.

• After selecting an option, you can press the shutter button to

shoot immediately. After shooting, this menu will appear again,

allowing you to adjust the settings easily.

eePress the FUNC./SET button.

Menus and Settings

a b

a ba b e

c d

c dc d

This example shows the FUNC.

menu in mode.

Before Using the Camera – Basic Operations

Rec., Play, Print, Set up and My Camera

Menus

Convenient settings for shooting, playback or printing can be set

with these menus.

aaPress the MENU button.

bbUse the or button to switch between menus.

• You can also use the zoom lever to switch between menus.

ccUse the or button to select a menu item.

• Some items may not be selectable in some shooting modes.

ddUse the or button to select an option.

• Menu items followed by an ellipsis (...) can only be set after

pressing the FUNC./SET button to display the next menu.

Press the FUNC./SET button again to confirm the setting.

eePress the MENU button.

• This example shows the Rec. menu in mode.

• In playback mode, the Play, Print, Set up and My Camera menus display.

You can switch

between menus

with the or

button when this

part is selected.

(Rec.) Menu (Set up) Menu

(My Camera) Menu

FUNC. Menu

The icons shown below are the default settings.

Rec. Menu ( )

*Default setting

Menu List

Menu Item Reference

Page Menu Item Reference

Page

ISO Speed p. 62 Metering Mode p. 50

White

Balance p. 52 Compression

(Still image) p. 28

Drive Mode p. 31, Basic

Guide p. 16

Frame Rate (Movie)

p. 38

My Colors p. 55 Recording Pixels

(Still image) p. 27

+/– (Flash)/

Flash Output p. 63

Recording Pixels

(Movie) p. 38

Menu Item Options Reference Page

AF Frame AiAF*/Center/FlexiZone p. 44

Digital Zoom On*/Off 1.5x/1.9x

(In standard movie mode:

On*/Off

)

p. 29

Flash Sync 1st-curtain*/2nd-curtain p. 64

Slow Synchro On/Off* Basic Guide p. 14

Flash Adjust Auto*/Manual p. 63

Red-Eye On*/Off Basic Guide p. 12

Spot AE Point Center*/AF Point p. 50

MF-Point Zoom On*/Off p. 47

AF-assist Beam

On*/Off –

Review Off/2*–10 seconds/Hold Basic Guide p. 9

Save Original On/Off* p. 61

Before Using the Camera – Basic Operations

Play Menu ( )

Print Menu ( )

Disp. Overlay Off*/Grid Lines/3 : 2

Guide/Both

(Movie mode: Off*/Grid

Lines)

p. 34

IS Mode Continuous*/Shoot Only/

Panning/Off p. 28

Converter None*/WC-DC58N/

TC-DC58N/250D

Set up when shooting

using the [IS Mode] by

attaching the tele-

converter, wide converter

or close-up lens, sold

separately (p. 113).

Date Stamp Off*/Date/Date & Time p. 33

Menu Item Reference Page

Auto Play p. 80

My Colors p. 77

Sound Memo p. 79

Protect p. 81

Rotate p. 76

Erase all p. 82

Transfer Order p. 86

Menu Item Reference Page

p. 83

Select Image & Qty.

Select All Images

Clear All Selections

Print Settings

Menu Item Options Reference Page

Set up Menu ( )

*Default setting

Menu Item Options Reference Page

Mute On/Off*

Set to [On] to silence all operation

sounds except for the warning sounds

(Basic Guide p. 8).

Volume Off/1/2*/3/4/5

Adjusts the volume of the start-up

sound, operation sound, self-timer

sound, shutter sound and playback

sound. The volume cannot be

adjusted if [Mute] is set to [On].

Start-up Vol.

Adjusts the volume of the start-up

sound when the camera is turned on.

Operation Vol. Adjusts the volume of the

operation sound that beeps when

any button other than the shutter

button is pressed.

Selftimer Vol. Adjusts the volume of the self-

timer sound played 2 sec. before

the shutter is released.

Shutter Volume Adjusts the volume of the sound

played when the shutter releases.

The shutter sound does not play

when a movie is recording.

Playback Vol. Adjusts the volume of movie

sounds and sound memos.

Power Saving p. 17

Auto Power

Down

On*/Off Sets whether or not the camera

automatically powers down after a

set period of time elapses without

the camera being operated.

Display Off

10 sec./20 sec./

30 sec./1 min.*/

2 min./3 min.

Sets the length of time before the

LCD monitor turns off when no

camera operation is performed.

Date/Time Basic Guide p. 7

Format You can also select a low level

format (p. 26).

Before Using the Camera – Basic Operations

*1The connection method with the printer can be changed. Although it is

normally not necessary to change the setting, select when borderless

printing an image shot in (Widescreen) mode on wide size paper using

Canon compact photo printer SELPHY CP730/CP720/CP710/CP510. As

this setting will be stored to memory even when the power is turned off, to

print using an image size other than , return the mode to [Auto]

(however, the connection method cannot be changed while connected to a

printer).

File Numbering

Continuous*/

Auto Reset

p. 68

Create Folder p. 66

Create New

Folder

Check mark

(On)/

No check mark

(Off)

Creates a folder during the next

shooting session.

Auto Create Off*/Daily/

Monday-

Sunday/

Monthly

You can also set an auto creation

time.

Auto Rotate On*/Off p. 65

Distance Units m/cm* /

ft/in

Sets the units for the MF indicator

distance unit (p. 47).

Lens Retract 1 minute* /

0 seconds

Sets the lens retraction timing

when switching from shooting

mode to playback mode.

Language p. 7Basic Guide

Video System NTSC/PAL p. 88

Print Method Auto*/ See below* 1.

Reset All p. 25

Menu Item Options Reference Page

My Camera Menu ( )

The camera's start-up image and start-up sound, operation sounds,

self-timer sounds, and shutter sounds are called “My Camera

settings”. You can also use the supplied software to upload your

computer’s images and sounds to the camera.

*Default setting

Menu Item Options

Start-up Image When the power is turned on, the start-up image

appears.

Start-up Sound When the power is turned on, a start-up sound is

played.

Operation Sound When a button other than the shutter button is

pressed, an operation sound will be played.

Selftimer Sound While shooting in self-timer mode, a sound will

be played two seconds before the shutter

releases.

Shutter Sound A sound will be played when the shutter button is

fully pressed. The shutter sound does not play

when a movie is recording.

Settings On*/Off

z See the supplied Software Starter Guide for more

information on creating and adding to the My Camera

settings.

z A computer is required to restore the My Camera settings to

the defaults. Use the supplied software (ZoomBrowser EX/

ImageBrowser) to restore the default settings to the camera.

Before Using the Camera – Basic Operations

Resetting Settings to Their Default Values

1 (Set up) Menu [Reset All].

See Menus and Settings (p. 19).

2Select [OK] and press .

z Settings cannot be reset when the camera is connected to a

computer or to a printer.

z The following cannot be reset.

- Shooting mode

- The [Date/Time], [Language] and [Video System] options in

the (Set up) menu (pp. 22 23),

- White balance data recorded with the custom white

balance function (p. 53)

- Colors specified in the [Color Accent] (p. 58) or [Color

Swap] (p. 59) modes

- Newly registered My Camera settings

You should always format a new memory card or one from which

you wish to erase all images and other data.

Formatting Memory Cards

Please note that formatting (initializing) a memory card erases

all data, including protected images and other file types.

1 (Set up) Menu [Format].

See Menus and Settings (p. 19).

2Select [OK] and press .

z To perform a low level format, use the

button to select [Low Level

Format] and the or button to

add a check mark.

z You can stop formatting a card when

[Low Level Format] is selected by

pressing the FUNC./SET button. You can still use a card

without problem when formatting is halted, but its data will

be erased.

z This operation is not available in mode.

z Low Level Format

We recommend you select [Low Level Format] when you

think that the recording/reading speed of a memory card

has dropped. A low level format may require 2 to 3 minutes

with some memory cards.

Shooting

Approximate Values for Recording Pixels

* Paper sizes vary according to region.

Changing the Recording Pixels and

Compression (Still Images)

Shooting Mode

1FUNC. Menu * (Compression)/ *

(Recording Pixels).

See Menus and Settings (p. 18).

* Default setting.

z Use the or button to select

compression settings/recording

pixels and press the FUNC./SET

button.

Recording Pixels Purpose*

(Large) 3072 x 2304 pixels

High

Low

Printing to about A3 size

(Approx. 297 x 420 mm

(11.7 x 16.5 in.))

(Medium 1) 2592 x 1944 pixels

Printing to about A4 size

(Approx. 210 x 297 mm

(8.3 x 11.7 in.))

Printing to about Letter-size

216 x 279 mm (8.5 x 11 in.)

(Medium 2) 2048 x 1536 pixels

Printing to about A5 size

(Approx. 149 x 210 mm

(5.9 x 8.3 in.))

(Medium 3) 1600 x 1200 pixels

Print postcard-size prints

148 x 100 mm (6 x 4 in.)

Print L-size prints 119 x

89 mm (4.7 x 3.5 in.)

(Small) 640 x 480 pixels

Send images as e-mail

attachments or shoot more

images

(Postcard) 1600 x 1200 pixels

Print postcard-size prints 148 x

100 mm (6 x 4 in.)

Print L-size prints 119 x 89 mm

(4.7 x 3.5 in.)

(Widescreen) 3072 x 1728 pixels

Print on wide paper (Records at a

16:9 width-to-height aspect ratio.

Areas that will not be recorded

appear on the LCD monitor as a

black border.).

Approximate Values for Compression Settings

The lens shift type image stabilizer function allows you to minimize

the camera shake effect (blurred images) when you shoot distant

subjects that have been magnified or when you shoot in dark

conditions without a flash.

Compression Purpose

Superfine High Quality

Normal

Shoot higher quality images

Fine Shoot normal quality images

Normal Shoot more images

z See Image Data Sizes (Estimated) .(p. 126)

z See Memory Cards and Estimated Capacities .(p. 124)

Setting the Image Stabilizer Function

Shooting Mode

Continuous

You can check the effect of the IS mode on image blur on

the LCD monitor since the IS mode runs continually. This

makes it easier to compose images and focus on subjects.

Shoot Only

IS mode is only activated when the shutter button is

pressed, so subjects will be captured with reduced blur

even if their movements on the LCD monitor are not

smooth. This option is not available in the mode.

Panning

This option only stabilizes the effect of up and down

camera motions on the image. This option is

recommended for shooting objects moving horizontally.

This option is not available in the mode.

1 (Rec.) Menu [IS Mode] [Continuous]*/

[Shoot Only]/[Panning]/[Off].

See Menus and Settings (p. 19).

* Default setting.

Shooting

The following icons appear on the LCD monitor.

*1 Cannot be set in and modes.

*2 Digital tele-converter cannot be set.

You can combine digital zoom with optical zoom when shooting.

The available shooting characteristics and focal lengths (35mm film

equivalent) are as follows:

[Continuous] [Shoot Only] [Panning] [Converter] setting

in Rec. menu

Reference

Page

None

p. 113

WC-DC58N/

TC-DC58N/250D

zIf you select [Shoot Only] or [Panning] in shooting mode

(still images) and then switch to mode, the setting will

change to [Continuous].

zCamera shake may not be fully corrected when shooting

with slow shutter speeds, such as with evening shots. Use

of a tripod is recommended.

zIf camera shake is too strong, it may not be fully corrected.

zHold the camera horizontally while panning (stabilization

does not work when the camera is held vertically).

Using the Digital Zoom/Digital Tele-Converter

Shooting Mode

Selection Focal Length Shooting Characteristics

Standard 35 – 840 mm

Enables shooting at zoom factors of

up to 24x with digital and optical

zoom combined. In , this setting

is only available in Standard

mode.

Off 35 – 210 mm Enables shooting without digital

zoom.

1.5x 52.5 – 315 mm

Digital zoom is fixed at the selected

zoom factor, and the focal length

shifts to maximum telephoto. This

enables a faster shutter speed and

less chance of camera shake than a

shot taken at the same angle of view

with [Standard] or [Off].

1.9x 66.5 – 399 mm

*1*2

Shooting with the Digital Zoom

zThe digital zoom cannot be used when the LCD monitor is

turned off.

zThe digital zoom cannot be used in or (Postcard),

or (Widescreen) modes.

1(Rec.) Menu [Digital Zoom] [Standard]*/

[Off]/[1.5x]/[1.9x].

See Menus and Settings (p. 19).

* Default setting.

zWhen using [Standard]:

See Shooting with the Digital Zoom

(p. 30).

zWhen using [1.5x], [1.9x]:

See Shooting with the Digital Tele-Converter (p. 31)

2Press the zoom lever toward and shoot.

zThe combined digital and optical

zoom setting will display in the LCD

monitor.

zBased on the number of recording

pixels set, the Safety Zoom feature

calculates the maximum zoom factor

beyond which image quality will begin to deteriorate. The

digital zoom pauses at this zoom factor for a moment, and

appears on the LCD monitor.

If you press the zoom lever toward again, you can zoom

in even closer.

In this case, the zoom factor color has the following

meanings:

- White: optical zoom

- Yellow: digital zoom (non-deteriorative)

- Blue: digital zoom (deteriorative)

zPress the zoom lever toward to zoom out.

Shooting

Shooting with the Digital Tele-Converter

*1 Cannot be set in and modes.

In this mode, the camera shoots continuously while the shutter

button is held down.

If you use the recommended memory card*

2, you can shoot

continuously (smooth continuous shooting) at a set shooting

interval until the memory card is full (p. 124).

*2 Recommended Memory Card:

Super high-speed SDC-512MSH memory card (sold separately)

to which low-level formatting (p. 26) is conducted immediately

before shooting.

• This reflects standard shooting criteria established by Canon. Actual

results may vary according to the subject and shooting conditions.

• Even if continuous shooting suddenly stops, the memory card may not be

full.

Adjust the angle of view with

the zoom lever and shoot.

zappears on the LCD monitor.

zDepending on the number of

recording pixels set, image quality

may deteriorate ( and the zoom

factor appear in blue).

About the Digital Tele-Converter

The digital tele-converter feature uses digital zoom to achieve the

effects of a tele-converter (a lens used in telephoto shooting).

Continuous Shooting

Shooting Mode

1FUNC. Menu * (Drive Mode)

See Menus and Settings (p. 18).

* Default setting.

Digital tele-converter

To Cancel Continuous Shooting

Follow procedure 1 to display

You can shoot images with the optimal settings for postcards by

composing them inside the print area (width-to-height ratio of

approximately 3:2) shown in the LCD monitor.

2Shoot.

zThe camera will continue to record successive images while

the shutter button is held down. Recording will cease when

the shutter button is released.

zThe interval between shots lengthens when the built-in

memory of the camera fills.

zIf the flash is used, the interval between shots lengthens

because the flash must charge.

Postcard Mode

Shooting Mode

1FUNC. Menu *(Recording Pixels)

(Postcard).

See Menus and Settings (p. 18).

* Default setting.

zThe recording pixels are set to (1600 x 1200) and the

compression to (Fine).

zThe area that will not get printed grays out.

The digital zoom and digital tele-converter cannot be used in

this mode.

For printing instructions, refer to the Direct Print User Guide.

Shooting

Embedding the Date in the Image Data

You can embed the date in image data when (Postcard) is

selected.

1 (Rec.) Menu [Date Stamp] [Off]*/

[Date]/[Date & Time].

See Menus and Settings (p. 19).

* Default setting.

zLCD monitor display

: [Off]

: [Date]/[Date & Time]

zEnsure that the camera’s date/time is set beforehand

(p. 22).

zThe date stamp cannot be deleted from the image

data once it has been embedded.

*1 Only [Grid Lines] can be set.

You can display vertical and horizontal grid lines, a 3:2 print area

guide, or both on the LCD monitor while shooting to help check the

position of your subject.

*2 Images are still recorded at the standard aspect ratio of 4:3.

Setting the Display Overlays

Shooting Mode

Grid Lines

Displays grid lines to divide the screen into 9 parts.

Helps confirm the vertical and horizontal positioning of

the subject.

3:2 Guide Helps confirm the print area for a 3:2 print.* 2

Areas outside the printable area are grayed out.

Both Displays both the grid lines and the 3:2 guide

simultaneously.

1(Rec.) Menu [DISP. Overlay] [Off]*/

[Grid Lines]/[3:2 Guide]/[Both].

See Menus and Settings (p. 19).

* Default setting.

The grid lines and 3:2 guide will not be recorded in the image.

Shooting

The following movie modes are available.

For information on the recording pixels and frame rate in each

mode, refer to “Recording Pixels and Frame Rates” (p. 38).

• The recording time will differ according to the memory card used (p. 124).

* Even if the size of the movie data has not reached 1 GB, recording may

stop when a shooting time of 1 hour has elapsed.

Movie Shooting

Shooting Mode

Standard

You can select the recording pixels and frame rate and record until

the memory card is full (when a super high-speed memory card is

used, such as the recommended SDC-512MSH).

The digital zoom can be used while shooting in this mode (p. 29).

• Maximum Size: 1 GB/movie*

Fast Frame Rate

Use this mode to record fast moving subjects, such as in sports

photography.

• Maximum Clip Length: 1 minute

Compact

Since there are few recording pixels and also the data size is

small, this mode is convenient for sending movies as e-mail

attachments or when the memory card capacity is low.

• Maximum Clip Length: 3 minutes

Color Accent, Color Swap

You can have only the specified color remain and change all

others into black and white, or change a specified color into a

different color. (pp. 58, 59).

As with the Standard mode, you can select the recording pixels

and frame rate and record until the memory card is full (when a

super high-speed memory card is used, such as the

recommended SDC-512MSH).

• Maximum Size: 1 GB/movie*

Select a movie mode using

the or button.

zIn , or mode, you can

change the recording pixels and

frame rate (p. 37).

zFor and mode procedures,

see “Changing the Color” (p. 57).

2Shoot.

zPressing the shutter button halfway automatically sets the

exposure, focus and white balance settings.

zPressing the shutter button fully starts recording video and

sound simultaneously.

zDuring shooting, the recording time and [

zRec] appear on

the LCD monitor.

zPressing the shutter button fully again stops recording.

Recording will stop automatically under the following

circumstances.

- When the maximum recording time elapses

- When the built-in memory or memory card becomes full

zYou are recommended to use a memory card that has

been formatted in your camera to shoot movies (p. 26).

The memory card supplied with the camera may be used

without further formatting.

zBe careful of the following while recording.

- Do not touch the microphone (Basic Guide p. 1).

- Do not press any buttons other than the shutter button.

The sound that buttons make will be recorded in the

movie.

- The camera will automatically adjust the exposure and

white balance to suit the shooting conditions during

recording. Please note, however, that the sounds made

by the camera automatically adjusting the exposure may

also be recorded.

The focus and optical zoom settings remain fixed for

subsequent frames at the values selected for the first frame.

Do not point the camera at the sun when shooting.

Shooting

QuickTime 3.0 or later is required to play back movies (Data

type: AVI/Compression method: Motion JPEG) on a

computer. QuickTime (for Windows) is included on the Canon

Digital Camera Solution Disk. On the Macintosh platform, this

program is standard with Mac OS X or later.

Changing Recording Pixels and Frame

Rates (Movies)

You can change the recording pixels and frame rate when the

movie mode is set to (Standard), (Color Accent) or

(Color Swap).

FUNC. Menu * (Frame Rate)/ *

(Recording Pixels).

See Menus and Settings (p. 18).

* Default setting.

zUse the or button to

select a frame rate/recording

pixels and press the FUNC./

SET button.

Recording Pixels and Frame Rates

Frame rates indicate the number of frames recorded or played back

each second. The higher the frame rate, the smoother the

appearance of motion.

*1 Default setting.

*2 The recording pixels and frame rate are fixed.

Recording Pixels

Frame Rate

(frames/sec.)

Standard

Color Accent

Color Swap

640 x 480 pixels

–{*1{

320 x 240 pixels

–{ {

Fast Frame Rate*

320 x 240 pixels

{

{{ – –

Compact*2160 x 120 pixels ––{

zSee Image Data Sizes (Estimated) .(p. 126)

zSee Memory Cards and Estimated Capacities .(p. 124)

Shooting

Stitch Assist can be used to shoot overlapping images that can later

be merged (stitched) to create one panoramic image on a

computer.

Shooting Panoramic Images

(Stitch Assist)

Shooting Mode

1Use the or button to select a shooting

direction.

zYou can select from the following two

shooting directions.

- Left to right horizontally

- Right to left horizontally

2Shoot the first image in the sequence.

zThe exposure and white balance are set and locked with the

first image.

The overlapping seams of

several adjacent images

can be joined into a single

panoramic image.

The camera automatically sets the shutter speed and aperture

value to match the brightness of the subject.

When a correct exposure cannot be obtained, the shutter speed and

aperture values are shown in red on the LCD monitor when the shutter

button is pressed halfway. Use the following shooting methods to

obtain the correct exposure and make them show in white.

3Compose the second image so that it

overlaps a portion of the first and shoot.

zYou can press the or button to return to the

previously recorded image to retake the shot.

zMinor discrepancies in the overlapping portions can be

corrected when the images are stitched together.

4Repeat the procedure for additional images.

zA sequence may contain up to 26 images.

zPress the FUNC./SET button after the last shot.

zYou cannot display the images on a TV when shooting in

Stitch Assist mode.

zThe settings for the first image are applied to the second

image onward (except for Macro setting).

zUse PhotoStitch, a supplied software program, to merge the

images on a computer.

zWhen the button is pressed, you can switch between the

items which you can set.

- Exposure compensation/Shooting direction selection

Program AE

Shooting Mode

- Using the flash

- Changing the ISO speed

- Changing the metering method

Shooting

When you set the shutter speed, the camera automatically selects

an aperture value to match the brightness of the subject. Faster

shutter speeds allow you to catch an instantaneous image of a

moving subject, while slower speeds create a flowing effect and

allow you to shoot without a flash in dark areas.

Setting the Shutter Speed

Shooting Mode

zIf the aperture value is shown in red, the image is

underexposed (insufficient light) or overexposed (too much

light). Use the or button to adjust the shutter speed

until the aperture value shows in white.

zThe nature of CCD image sensors is such that noise in the

recorded image increases at slow shutter speeds. This

camera, however, applies special processing to images

shot at shutter speeds slower than 1.3 seconds to

eliminate the noise, thereby producing high-quality images.

(However, a certain amount of processing time may be

required before the next image can be shot.)

zThe aperture value and shutter speed change according to

the zoom state as follows

zThe fastest shutter speed for flash synchronization is 1/500

second. The camera automatically resets the shutter speed

to 1/500 second if a faster speed is selected.

Shooting

Mode

Aperture

Value

Shutter Speed

(seconds)

Maximum

Wide Angle

f/2.8 – 3.5 15 – 1/1500

f/2.8 – 3.5 15 – 1/1250

, f/4.0 – 8.0 15 – 1/2000

Maximum

Telephoto

f/4.8 – 6.3 15 – 1/1500

f/4.8 – 6.3 15 – 1/1250

, f/7.1 – 8.0 15 – 1/2000

The aperture adjusts the amount of light entering through the lens.

When you set the aperture value, the camera automatically selects

a shutter speed to match the brightness.

Selecting a lower aperture value (opening the aperture) allows you

to blur the background and create a beautiful portrait. A higher

aperture value (closing it) brings the entire range from foreground to

background into focus. The larger the aperture value, the greater

the range of the image brought into clear focus.

Shutter Speed Display

The following shutter speeds can be set. 1/160 indicates 1/160

second. Also, 0"3 indicates 0.3 second and 2" indicates 2 seconds

Setting the Aperture

Shooting Mode

zIf the shutter speed is shown in red, the image is

underexposed (insufficient light) or overexposed (too much

light). Adjust the aperture value using the or button

until the shutter speed display turns to white.

zSome aperture values may not be available with certain

zoom positions (p. 41).

In this mode, the shutter speed range with synchronized flash

is 1/60 second to 1/500 second. The aperture value setting

may therefore be changed automatically to match the

synchronized flash speed even if its value was set previously.

* Only in the shooting mode

15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3 1" 0"8 0"6 0"5 0"4 0"3

1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30 1/40 1/50 1/60

1/80 1/100 1/125 1/160 1/200 1/250 1/320 1/400 1/500 1/640

1/800 1/1000 1/1250 1/1500* 1/1600 1/2000

Shooting

You can manually set the shutter speed and aperture to shoot images.

zWhen you press the shutter button halfway, the difference

between the standard exposure* and the selected exposure

appears on the LCD monitor. If the difference is more than ±2

stops, “–2” or “+2” appears in red.

* Standard exposure levels are calculated by measuring light according to

the currently selected metering mode.

Aperture Value Display

zThe larger the aperture value, the smaller the lens aperture.

Manually Setting the Shutter

Speed and Aperture

Shooting Mode

zIf you wish to change the exposure, select shutter speed or

aperture using the button, then adjust the value using

the or button.

If the zoom is adjusted after these values are set, the aperture

value may change in accordance with the zoom position

(p. 41).

zThe LCD monitor’s brightness matches the selected shutter

speed and aperture value.

When you select a fast shutter speed or shoot a subject in a dark

place, the image will always be bright if the flash is set to

(Flash on, with red-eye reduction) or (Flash on).

F2.8 F3.2 F3.5 F4.0 F4.5 F4.8 F5.0 F5.6 F6.3 F7.1 F8.0

* Cannot be set in and modes.

The AF frame indicates the area of the composition on which the

camera focuses. You can set the AF frame in the following ways.

Selecting an AF Frame

Shooting Mode

AiAF

The camera automatically selects between

9 AF frames to focus on according to the

shooting conditions.

Center

The camera focuses using the center AF

frame. This is convenient for making sure

the focus is exactly where you want it.

FlexiZone

(Manual

setting)

Mode dial: / / /

You can move the AF frame manually to

the desired position. This is convenient for

focusing accurately on your chosen subject

to obtain the composition you desire.

1 (Rec.) Menu [AF Frame] [AiAF]*/

[Center]/[FlexiZone].

See Menus and Settings (p. 19).

* Default setting.

zWhen [FlexiZone] is selected (p. 45).

z[FlexiZone] cannot be selected when the LCD monitor is off.

zThe AF frame appears as follows (when the LCD monitor is

on) when the shutter button is pressed halfway.

(Desired position)

• Green : Shooting preparations complete

• Yellow : Focusing difficulty*

* It will not be displayed when the AF frame is set to [AiAF].

Shooting

Selecting an AF Frame Manually

(when [FlexiZone] is selected)

1Turn on the LCD monitor.

2Press the button several times until

the AF frame turns green.

zDepending on the shooting mode, you can switch

between the following setting options by pressing the

button.

3Use the , , or button to move

the AF frame to the desired position and

press the button.

zIf you hold down the button, the AF frame will

return to the original position (center) (at the same

time, the setting options will switch as shown in the

above table).

Exposure compensation/AF frame

Shutter speed/Exposure compensation/AF frame

Aperture value/Exposure compensation/AF frame

Shutter speed/Aperture value/AF frame

zWhen [Spot AE Point] is selected as the light metering

mode, you can use the selected AF frame as the Spot

AE Point (p. 50).

zIt cannot be selected while manual focus is being used

(p. 47).

zThe AF frame returns to the center when the camera’s

power is turned off.

* Cannot be used in mode.

It may be difficult to focus on the following types of subjects.

zSubjects with extremely low contrast to the surroundings

zScenes with a mixture of near and far subjects

Subjects with extremely bright objects at the center of the composition

zSubjects that are moving quickly

zSubjects through glass: Try to shoot as close to the glass as possible

to reduce the chances of light reflecting back off the glass.

Shooting with the Focus Lock

Shooting with the AF Lock

Shooting Hard-to-Focus Subjects

(Focus Lock, AF Lock, Manual Focus)

Shooting Mode

1Aim the camera so that an object at the

same focal distance as the main subject is

centered in the viewfinder or in the AF frame

displayed on the LCD monitor.

2Press the shutter button halfway to lock the

focus.

3Keep the shutter button pressed halfway

while you recompose the image and press

the shutter button all the way to shoot the

image.

1Turn on the LCD monitor.

2Aim the camera so that an object at the

same focal distance as the main subject is

centered in the AF frame.

Shooting

To Release the AF Lock

Press the button.

Shooting in Manual Focus Mode

The focus can be manually set.

3Press and hold the shutter button halfway

and press the button.

zThe icon and the MF indicator will appear on the LCD

monitor.

4Re-aim the camera to compose the shot as

desired and shoot.

zThe AF lock cannot be used in the and modes.

zWhen shooting with the focus lock or AF lock using the LCD

monitor, setting [AF Frame] to [Center] (p. 44) makes

shooting easier since the camera focuses using the center

AF frame only.

zThe AF frame will not appear in mode.

zThe AF lock is convenient because you can let go of the

shutter button to compose the image. Moreover, the AF lock

is still effective after the picture is taken, allowing you to

capture a second image with the same focus.

1Turn on the LCD monitor.

Press the button several times to display .

zThe MF indicator is displayed.

zWhen the (Rec.) menu’s

[MF-

Point Zoom] is set to [On], the portion

of the image in the AF frame will

appear magnified*.

* The image will not appear magnified in

mode, when the digital zoom or digital

tele-converter is activated or when a TV is

used as the display.

* Can also be set so that the image displayed is not magnified

(p. 20).

MF indicator

To Cancel the Manual Focus

Press the button.

You can set the exposure and focus separately. This is effective

when the contrast is too strong between the subject and

background or when a subject is backlit.

z Depending on the shooting mode, pressing the button

will switch between the setting items as follows:

3Press the or button and adjust the focus.

z The MF indicator shows approximate figures. Use them as a

shooting guideline only.

The manual focus cannot be used in the and

modes.

Locking the Exposure Setting

(AE Lock)

Shooting Mode

You must set the flash to . The AE lock cannot be set if

the flash fires.

1Turn on the LCD monitor.

2Focus on the part of the subject on which

you wish to lock the exposure setting.

* Cannot be set in the or modes.

, , , Exposure compensation/

mode/Exposure compensation*/

mode/

Shutter speed/Exposure compensation/

Aperture value/Exposure compensation/

Shutter speed/Aperture value/

Shooting

To Release the AE Lock

Press a button other than the or button.

You can lock the flash exposure so that the exposure settings are

correctly set regardless of the composition of your subject.

To Release the FE Lock

Press a button other than the or button.

3Press and hold the shutter button halfway

and press the button.

z The icon will display.

4Re-aim the camera to compose the shot as

desired and press the shutter button fully.

You can use the FE lock when using the flash (p. 49).

Locking the Flash Exposure Setting

(FE Lock)

Shooting Mode

1Turn on the LCD monitor.

2Press the button and set it to (flash on).

3Focus on the part of the subject on which

you wish to lock the flash exposure setting.

4Press and hold the shutter button halfway

and press the button.

z The flash will pre-fire and will display.

5Re-aim the camera to compose the shot as

desired and press the shutter button fully.

The FE lock function is not available when [Flash Adjust] is

set to [Manual] (p. 63)

Metering Methods

Switching between Metering Modes

Shooting Mode

1FUNC. Menu * (Evaluative)

See Menus and Settings (p. 18).

* Default setting.

z Use the or button to select the

metering mode and press the FUNC./

SET button.

Evaluative

Appropriate for standard shooting conditions,

including backlit scenes. The camera divides

images into several zones for metering. It

evaluates complex lighting conditions, such as

the position of the subject, the brightness, the

direct light, and the backlighting, and adjusts

the settings to the correct exposure for the main

subject.

Center

Weighted

Average

Averages the light metered from the entire

frame, but gives greater weight to the subject

matter at the center.

Spot Meters the area within the spot AE point frame.

Center Locks the spot AE point frame to the center of

the LCD monitor.

AF Point

Moves the spot AE point to the same position

as the selected AF frame/Locks the spot AE

point to the center of the LCD monitor

Shooting

* Cannot be set in and modes.

Adjust the exposure compensation to a positive value to avoid

making the subject too dark when it is backlit or shot against a

bright background. Adjust the exposure compensation to a negative

value to avoid making the subject too bright in night shots or when

shot against a dark background.

Lock the spot AE point to the center of

the LCD monitor/Move the spot AE point

to the same position as the selected AF

frame

1 (Rec.) Menu [Spot AE Point]

[Center]*/[AF Point]

See Menus and Settings (p. 19).

* Default setting.

z When [Spot AE Point] is set to

[Center], the spot AE point frame

appears at the center of the LCD

monitor.

z When [Spot AE Point] is set to [AF Point], it appears

inside the selected AF frame.

Adjusting the Exposure

Compensation

Shooting Mode

1Turn on the LCD monitor.

[AF Point] can only be selected when the AF frame is set

to [FlexiZone] (p. 44).

To Cancel the Exposure Compensation

Follow procedure 2 to restore the compensation value to [0].

* Cannot be set in and modes.

Normally, the (Auto) white balance setting selects an optimal

white balance. When the (Auto) setting cannot produce natural

looking colors, change the white balance using a setting

appropriate for the light source.

2Press the button several times until the

exposure compensation bar is displayed.

z Use the or buttons to adjust the

exposure compensation and press the

button.

z Depending on the shooting mode,

pressing the button will switch

between the setting items as follows:

Adjusting the Tone (White Balance)

Shooting Mode

1FUNC. Menu * (Auto).

See Menus and Settings (p. 18).

* Default setting.

z Use the or button to select a

white balance setting and press the

FUNC./SET button.

* The AF frame can only be selected when [AF frame] is set to

[FlexiZone] (p. 44)

mode/Exposure compensation

Shooting direction selection/Exposure compensation

Shutter speed/Exposure compensation/AF frame*

Aperture value/Exposure compensation/AF frame*

Exposure compensation/AF frame*

Shooting

White Balance Settings

Auto Settings are automatically set by the camera.

Day Light For recording outdoors on a bright day.

Cloudy For recording under overcast, shady or twilight

skies.

Tungsten For recording under tungsten and bulb-type 3-

wavelength fluorescent lighting.

Fluorescent For recording under warm-white, cool-white or

warm-white (3-wavelength) fluorescent lighting.

Fluorescent H

For recording under daylight fluorescent, or

daylight fluorescent-type 3-wavelength

fluorescent lighting.

Underwater

Appropriate for shooting images underwater with

the Waterproof Case WP-DC6 (sold separately).

This mode yields image data in the optimal white

balance to record images with natural hues by

reducing the bluish tone.

Custom

For recording with the optimal white balance

data memorized in the camera from a white-

colored object, such as white paper or cloth.

The white balance setting cannot be adjusted when or

is selected for My Colors.

Using the Custom White Balance

You can set a custom white balance to obtain the optimal

setting for the shooting conditions by having the camera

evaluate an object, such as a piece of white paper or cloth, or

a photo-quality gray card that you wish to establish as the

standard white color.

In particular, take a custom white balance reading for the

following situations that are difficult for the (Auto) setting

to detect correctly.

zShooting close-ups (Macro)

zShooting subjects of monotone color (such as sky, sea or

forest)

zShooting with a particular source of light (such as a

mercury-vapor lamp)

FUNC. Menu * (Auto) (Custom).

See Menus and Settings (p. 18).

* Default setting.

2Aim the camera at a piece of white

paper or cloth and press .

z If you are viewing it with the LCD monitor, ensure that

the center frame is completely filled with the white

image. If you are using the optical viewfinder, ensure

that the entire field is filled. However, the center frame

will not appear when the zoom factor is 7.1x or higher

or when is displayed.

z You are recommended to set the shooting mode to

and the exposure compensation setting to [±0] before

setting a custom white balance.

The correct white balance may not be obtained when

the exposure setting is incorrect (image appears

completely black or white).

z Shoot with the same settings as when reading the

white balance data. If the settings differ, the optimal

white balance may not be set.

In particular, the following should not be changed.

- ISO Speed

- Flash

Setting the flash to on or off is recommended. If the

flash fires when reading the white balance data with

the flash set to (Auto) or (Auto with red-

eye reduction), make sure that you also use the flash

when you shoot.

z Since the white balance data cannot be read in Stitch

Assist mode, preset the white balance in another

shooting mode beforehand.

Shooting

* Cannot be set in and modes.

You can change the look of an image when it is shot.

My Colors Settings

* If the image contains colors that are the same as human skin, those colors

will also be changed.

You may not obtain the expected results depending on the skin color.

Shooting in a My Colors Mode

Shooting Mode

My Colors

Off Records normally with this setting.

Vivid Emphasizes the contrast and color saturation to

record bold colors.

Neutral Tones down the contrast and color saturation to

record neutral hues.

Sepia Records in sepia tones.

B/W Records in black and white.

Positive

Film

Use this option to make red, green or blue colors

more intense like the Vivid Red, Vivid Green or

Vivid Blue effects.

It can produce intense natural-appearing colors like

those obtained with positive film.

Lighter Skin

Tone*

Use this option to make skin tones lighter.

Darker Skin

Tone*

Use this option to make skin tones darker.

Vivid Blue

Emphasize blue tints.

Use to make blue subjects, such as the sky or

ocean, more vivid.

Vivid Green

Emphasize green tints.

Use to make green subjects, such as mountains,

new growth, flowers and lawns, more vivid.

Vivid Red

Emphasize red tints.

Use to make red subjects, such as flowers or cars,

more vivid.

Custom

Color

Use this option to adjust the balance between

contrast, sharpness, saturation, reds, greens,

blues and skin tones*. It can be used to make

subtle adjustments, such as making blue colors

more vivid or face colors brighter.

1FUNC. Menu * (My Colors Off).

See Menus and Settings (p. 18).

* Default setting.

z Use the or button to select a

My Colors mode.

2Shoot.

z Mode

See Setting the Camera to a Custom Color Mode (p. 56).

zz Modes other than

Press the FUNC./SET button. The display will return to the

shooting screen and you can shoot.

Setting the Camera to a Custom Color

Mode

1 (Custom Color) .

See Menus and Settings (p. 18).

2Use the or button

to select [Contrast],

[Sharpness],

[Saturation], [Red],

[Green], [Blue] or [Skin

Tone] and the or

button to adjust it.

z The altered color will display.

Select

an item

Adjust

Shooting

Allows you to easily transform the colors in an image when

shooting. This feature can be used for both still shots and movies,

and offers you the enjoyment of staging image and movie effects.

However, depending on the shooting conditions, there are

occasions when the image may appear rough, or you may not

obtain the desired color. Therefore, before you shoot important

subjects, we recommend that you shoot trial images and check the

results. Moreover, when shooting still images, the camera will

record both the My Colors image as well as the original unaltered

image when [Save Original] (p. 61) is set to [On].

z This completes the setting.

If you press the MENU button at this point, you will return

to the screen where you can select a My Colors mode.

Changing the Color

Shooting mode

Color Accent

Use this option to have only the color

specified in the LCD monitor remain and to

transform all others to black and white.

Color Swap

Use this option to transform a color specified

in the LCD monitor into another. Only one

different color can be selected. You cannot

choose from among multiple colors.

Depending on the scene shot, ISO speed may rise and image

noise may increase.

( )( )

Shooting in the Color Accent Mode

Still image: or button

Movie: or button

See Selecting a

Shooting Mode in

(Basic Guide p. 9)

z The camera will switch to color input mode and the display

will alternate between the original image and the color

accent image (using the previously set color).

3Aim the camera so that the color you wish

to retain appears at the center of the LCD

monitor and press the button.

z Only one color can be specified.

z You can use the or button to specify the range of

colors that are retained.

Press to complete the setting, then shoot.

z The default color accent is green.

z You may not obtain the expected results if you use the flash.

z The specified color accent is retained even if the camera’s

power is turned off.

Still image Movie

–5: Only takes the color that you want to retain.

+5: Also takes colors close to the one that you want to

retain.

Shooting

Shooting in the Color Swap Mode

1Still image: or button

Movie: or button

See Selecting a

Shooting Mode in

(Basic Guide p. 9)

z The camera will switch to color input

mode and the display will alternate

between the original image and the

color swap image (using the

previously set color).

Original Color

(Before Swapping)

Desired Color

(After Swapping)

Still image Movie

Still image

3Aim the camera so that the original color

appears at the center of the LCD monitor

and press the button.

z Only one color can be specified.

z You can use the or button to specify the range of

colors that are swapped.

4Aim the camera so that the desired color

appears at the center of the LCD monitor

and press the button.

z Only one color can be specified.

5Press to complete the setting, then

shoot.

z The default setting for color swap mode will change green

into white.

z You may not obtain the expected results if you use the flash.

z The colors specified in the color swap mode are retained

even if the camera’s power is turned off.

–5: Only takes the color that you want to swap.

+5: Also takes colors close to the one that you want to swap.

Shooting

Changing the Save Method for the

Original Image

When shooting still images in the Color Accent or Color Swap

mode, you can specify whether to record the original image

(the image before altering the color) in addition to the color-

altered image.

1 (Rec.) Menu [Save Original] [On]/

[Off]*.

See Menus and Settings (p. 19).

* Default setting.

z If [On] is selected, the two

images will be numbered

consecutively with the altered

image shot with the color accent

on color swap setting following the original.

When [Save Original] is Set to [On]

- Only the color accent or color swap-altered image is

shown in the LCD monitor during shooting.

- The image that appears in the LCD monitor

immediately after recording is the altered image shot

with the color accent or color swap setting. If you erase

the image at this point, the original image is erased

along with the altered image. Exercise adequate

caution before deleting an image.

- Since two images are recorded with each shot, the

number of shots remaining is approximately half the

number displayed when this function is set to [Off].

Raise the ISO speed to use a fast shutter speed when you wish to

reduce the effects of camera shake or avoid blurry subjects, or to

turn the flash off when shooting in a dark area.

ISO Speed Settings

{:Available *:Default

Adjusting the ISO Speed

Shooting Mode

1FUNC. Menu (Auto).

See Menus and Settings (p. 18).

z Use the or button to select an

ISO speed and press the FUNC./SET

button.

z Selecting sets the optimal ISO

speed according to the light level

when shooting. Since the ISO speed setting will

automatically be raised in dark places, the camera will

select a faster shutter speed and reduce the chances of

camera shake.

z Selecting (High ISO Auto)* sets a higher sensitivity than

for . As the shutter speed becomes even faster, camera

shake and blurred photos caused by subject movement will

be reduced even more than when shooting the same scene

in .

* Noise may increase in the captured image compared to .

Auto { { { {* * * * –

High ISO Auto

{ { – – –

ISO 80 – { { { {*

ISO 100 – {{{{

ISO 200 – {{{{

ISO 400 – {{{{

ISO 800 – {{{{

Shooting

Although the built-in flash will fire with automatic flash adjustments

(except in the mode), it is also possible to set it so that it fires

without any adjustments.

Switching between Flash

Adjustment Settings

Shooting Mode

1(Rec.) Menu [Flash Adjust] [Auto]*/

[Manual].

See Menus and Settings (p. 19).

* Default setting.

Compensating the Flash

Adjustment / Flash Output

Shooting Mode

+/– (Flash)

(Flash Exposure

Compensation)

z When the shooting mode is set to , , ,

, or when [Flash Adjust] is set to [Auto]

(p. 63) in or mode, settings can be

adjusted in 1/3-stop increments in the range of –2

to +2 stops.

z You can combine the flash exposure

compensation with the camera’s exposure

compensation function to achieve creative effects

which compensate for background exposure.

Flash Output

z When Shooting mode is set to or when [Flash

Adjust] is set to [Manual] in or mode

(p. 63), the flash output can be controlled in three

steps, starting from FULL, when shooting.

1FUNC. Menu (+/ – (Flash))/ (Flash

Output).

See Menus and Settings (p. 18).

z Adjust the compensation/output

using the or button and press

the FUNC./SET button.

Switching the Timing at which

the Flash Fires

Shooting Mode

1st-curtain

The flash fires right after the shutter opens,

regardless of the shutter speed. Usually, the 1st-

curtain is used when shooting.

2nd-curtain

The flash fires right before the shutter closes.

Compared with the 1st-curtain, the flash fires later

and allows you to shoot images in which, for

example, a car’s taillights seem to trail off behind.

1(Rec.) Menu [Flash Sync] [1st-curtain]*/

[2nd-curtain].

See Menus and

Settings (p. 19).

* Default setting.

Example:

Flash Exposure

Compensation

Image shot with the

1st-curtain setting

Image shot with the

2nd-curtain setting

Shooting

Your camera is equipped with an Intelligent Orientation sensor that

detects the orientation of an image shot with the camera held

vertically and automatically rotates it to the correct orientation when

viewing it in the LCD monitor.

Setting the Auto Rotate Function

Shooting Mode

1 (Set up) Menu [Auto Rotate] [On]*/

[Off].

See Menus and Settings (p. 19).

* Default setting.

z When the Auto Rotate function is set

to [On] and the LCD monitor is set to

the detailed display mode during

shooting, (normal), (right end

is down) or (left end is down) will appear in the display.

z This function may not operate correctly when the camera

is pointed straight up or down. Check that the arrow is

pointing in the right direction and if it is not, then set the

Auto Rotate function to [Off].

z Even if the Auto Rotate function is set to [On], the

orientation of images downloaded to a computer will

depend upon the software used to download the images.

z When the camera is held vertically to shoot, the Intelligent

Orientation sensor judges the upper end to be “up” and the

lower end to be “down”. It then regulates the optimal white

balance, exposure and focus for vertical photography. This

function operates regardless of the on/off status of the Auto

Rotate function.

You can create a new folder at any time and the recorded images

will be automatically saved to that folder.

Creating a Folder the Next Time You Shoot.

Creating an Image Destination (Folder)

Shooting Mode

Create New Folder

Creates a new folder the next time you shoot

images. To create an additional folder, insert

the check mark again.

Auto Create

You can also specify a date and time if you

wish to create a new folder using a shooting

time after the specified date and time.

1 (Set up) Menu [Create

Folder].

See Menus and Settings (p. 19).

2Use the or button to

check mark [Create New

Folder] .

z displays in the LCD monitor. The

symbol will cease to display after the

new folder is created.

Shooting

Setting the Day or Time for Automatic Folder

Creation .

2Select a day for the [Auto

Create] option and a time in

the [Time] option .

z displays when the specified time

arrives. The symbol will cease to

display after the new folder is

created.

Up to 2000 images can be saved into one folder. A new folder

will automatically be created when you record more than that

number even if you are not creating new folders.

The images you shoot are automatically assigned file numbers. You

can select how the file number is assigned.

File Number Reset Function

Resetting the File Number

Shooting Mode

1 (Set up) Menu [File

Numbering] [Continuous]*/

[Auto Reset].

See Menus and Settings (p. 19).

* Default setting.

Continuous

A number one higher than the last one recorded is

assigned to the next image. This is convenient for

managing all your images together on a computer

because you avoid file name duplication when

changing folders or memory cards.*

* When a blank memory card is used. If a memory card with

recorded data is used, the 7-digit number for the last

recorded folder and image is compared with the last one on

the card, and the larger of the two is utilized as the basis for

new images.

Auto Reset

The image and folder number are reset to the starting

value (100-0001).* This is convenient for managing

images on a folder-by-folder basis.

* When a blank memory card is used. If a memory card with

recorded data is used, the number following the 7-digit

number for the last recorded folder and image on the card is

utilized as the basis for new images.

Shooting

File and Folder Numbers

Recorded images are assigned consecutive file numbers starting

with 0001 and ranging up to 9999, while folders are assigned

numbers starting with 100 and ranging up to 999. Up to 2,000

images can be saved into a single folder.

zImages may be saved to a new folder when there is insufficient

free space even if the total number of images in a folder is less

than 2,000 because the following types of images are always

saved together into the same folder.

- Images from continuous shooting

- Self-timer images (custom)

- Stitch Assist mode images

- Color Accent and Color Swap still images. (When [Save

Original] is set to [On])

zImages cannot be played back when the folder numbers are

duplicated or image numbers are duplicated within folders.

zPlease refer to the Software Starter Guide for information

regarding folder structures or image types.

New Folder Created

Memory Card Exchanged for Another

Continuous

Memory Card 1

Memory Card 1 Memory Card 2

Auto Reset

Memory Card 1

Memory Card 1 Memory Card 2

Playback/Erasing

Please also see the Basic Camera User Guide (p. 18).

To Cancel the Magnified Display

Press the zoom lever toward . (You can also cancel it

immediately by pressing the MENU button.)

Magnifying Images

1Press the zoom lever toward .

z will display and a magnified

portion of the image will display.

zImages can be magnified up to a

factor of approximately 10x.

2Use the , , or button to move

around the image.

zIf you press the FUNC./SET button while in magnified

display, the camera switches to image advance mode and

will display. You can use the or button to

advance to the next or previous image at the same level of

magnification. The image advance mode is cancelled when

you press the FUNC./SET button again.

zYou can change the magnification level with the zoom lever.

Movie frames and index playback images cannot be

magnified.

Approximate Locatio

of the Displayed Are

When you have many images recorded onto a memory card, it is

handy to use the five search keys below to jump over images to find

the object of your search.

To Return to Single Image Playback

Press the MENU button.

Jumping to Images

Jump 10 Images Jumps over 10 images at a time.

Jump 100 Images Jumps over 100 images at a time.

Jump Shot Date Jumps to the first image of each

shooting date.

Jump to Movie Jumps to a movie.

Jump to Folder Jumps to the first image of each folder.

1In single image playback

mode, press the button.

zThe camera will switch to jump

search mode.

zThe screen sample will vary slightly

according to the search key.

2Use the or button to select a search

key and press the or button.

Location of

image currently

being displayed

Number of images

matching search

key

Playback/Erasing

Operating the Movie Control Panel

Viewing Movies

Movies cannot be played in the index playback mode.

1Display a movie and press

zImages with a icon are

movies.

2Select (Play) and press .

zThe movie will pause if you press the FUNC./SET button

during playback. It will resume when you press the button

again.

zWhen playback ends, the movie stops at the last frame

displayed. Press the FUNC./SET button to display the

movie control panel.

Ends playback and returns to single image playback

Prints (An icon will display when a printer is connected. See the

Direct Print User Guide for details.)

Play

Slow Motion Playback (You can use the button to slow

down or the button to speed up playback.)

Displays the first frame

Previous Frame (Rewinds if the

FUNC./SET

button is held down.)

Next Frame (Fast Forwards if the

FUNC./SET

button is held down.)

Displays the last frame

Edit (Switches to movie editing mode.) (p. 74)

Movie Control Panel

Volume Level

(Adjust it with the

or button)

You can delete portions of recorded movies.

zUse the television’s controls to adjust the volume when

playing a movie on a TV set (p. 88).

zThe sound cannot be played in slow motion playback.

Editing Movies

Movies that are protected or less than 1 second long cannot

be edited.

1Select (Edit) in the movie

control panel and press .

zThe movie editing panel and the

movie editing bar will display.

2Use the or button to select (Cut

Beginning) or (Cut End) and the or

button to specify the cut point ( ).

zTo check a temporarily edited movie, select (Play) and

press the FUNC./SET button.

zSelecting (Exit) cancels the edit and restores the movie

control panel.

3Select (Save) and press .

Movie Editing Panel

Movie Editing Bar

Playback/Erasing

4Select [New File] or

[Overwrite] and press .

z[New File] saves the edited movie

under a new file name. The pre-edit

data is left unchanged.

Note, if you press the FUNC./SET

button while saving the movie, saving is cancelled.

z[Overwrite] saves the edited movie with its original name.

The pre-edit data is lost.

zWhen there is not enough space left on the memory card,

only [Overwrite] can be selected.

It may take approximately 3 minutes to save an edited movie.

If the batteries run out partway through, edited movie clips

cannot be saved. When editing movies, it is recommended to

use new AA-size alkaline batteries or fully charged AA-size

NiNH batteries (sold separately) or the AC Adapter Kit

ACK800 (sold separately) (p. 109).

Images can be rotated clockwise 90° or 270° in the display.

Rotating Images in the Display

1 (Play) Menu .

See Menus and Settings (p. 19).

2Use the or button to select an image to

rotate and press to rotate it.

zCycle through the 90°/270°/original orientations with each

press of the FUNC./SET button.

zThis also can be set in the index playback mode.

zMovies cannot be rotated.

zWhen images are downloaded to a computer, the

orientation of images rotated by the camera will depend

upon the software used to download the images.

Original 90° 270°

Playback/Erasing

You can add effects to recorded images (stills only) using the My

Colors function. The following selection of My Colors effects is

available. For details, see p. 55.

Adding My Colors Effects

Vivid Lighter Skin Tone

Neutral Darker Skin Tone

Sepia Vivid Blue

B/W Vivid Green

Positive Film Vivid Red

1 (Play) Menu .

See Menus and Settings (p. 19).

2Use the or button to select an image,

and press .

3Use the or button to select the My

Colors type, and press .

zThe displayed image will reflect the

My Colors effect.

zYou can press the zoom lever toward

to check the image at a higher

magnification. While the image is

zoomed, you can press the FUNC./

SET button to switch between the image transformed with

the My Colors effect and the original non-transformed

image.

4Select [OK], and press .

zThe newly saved image transformed

with the My Colors effect will be the

last one in the list.

zTo continue adding effects to other

images, repeat the procedures from

Step 2 onward.

5Press and select [Yes] or [No], then press

zSelecting [Yes] displays the image

transformed with the My Colors effect,

while [No] returns you to the Play

menu.

zThe My Colors function will not work if there is insufficient

space on the memory card.

zAlthough My Colors effects can be added any number of

times to an image, the image quality will gradually

deteriorate with each application and the intended colors

may not be achieved.

zColor in images taken using My Colors (p. 55) in shooting

mode and images edited with the My Colors function in

playback mode may differ slightly.

Playback/Erasing

In playback mode (including single image playback and index

playback), you can attach sound memos (up to 1 min.) to an image.

The sound data is saved in the WAVE format.

Attaching Sound Memos to Images

1 (Play) Menu .

See Menus and Settings (p. 19).

2Use the or button to select an image to

which to attach a sound memo and press

zThe sound memo control panel will display.

3Select (Record) and press .

zThe elapsed time and the remaining

time display.

zPressing the FUNC./SET button

pauses the recording. Pressing it

again resumes recording.

zUp to 1 minute of recordings can be

added to any one image. Sound Memo

Panel

Elapsed Time/

Remaining Time

Volume

(Adjust it with the

or button)

Sound Memo Panel

Use this feature to automatically play back all of the images in the

memory card. The LCD monitor displays each image for

approximately 3 seconds.

Exit

Record

Pause

Play

Erase

Select [Erase] in the confirmation screen and press the FUNC./

SET button.

zYou cannot attach sound memos to movies.

zSound memos for protected images cannot be erased.

Automated Playback (Auto Play)

1 (Play) Menu .

See Menus and Settings (p. 19).

2Press .

zDuring automated playback, the following functions are

possible:

- Pausing/resuming the Auto Play: Press the FUNC./SET

button

- Fast forwarding/rewinding: Press the or button

(hold down the button to switch between images more

rapidly)

- Stopping the Auto Play: Press the buttonMENU

Playback/Erasing

You can protect important images and movies from accidental

erasure.

Protecting Images

1 (Play) Menu .

See Menus and Settings (p. 19).

2Use the or button to select an image to

protect and press .

zPressing the FUNC./SET button again

cancels the setting.

zYou can also protect images in the

index playback mode.

Protection Icon

Erasing All Images

zNote that erased images cannot be recovered. Exercise

adequate caution before erasing an image.

zProtected images cannot be erased with this function.

1 (Play) Menu .

See Menus and Settings (p. 19).

2Select [OK] and press .

zTo exit instead of erasing, select [Cancel].

Please format the memory card when you want to erase not

only image data but also all the data contained on the memory

card (p. 26).

Print Settings/Transfer Settings

You can select images on a memory card for printing and specify

the number of print copies in advance using the camera. The

settings used on the camera comply with the Digital Print Order

Format (DPOF) standards. This is extremely convenient for printing

on a direct print compatible printer, or for sending the images to a

photo developing service that supports DPOF.

Single Images

Setting the DPOF Print Settings

The icon may display for a memory card with print

settings set by a different DPOF-compliant camera. These

settings will be overwritten by those set by your camera.

1(Print) Menu [Select Image & Qty.] .

See Menus and Settings (p. 19).

zSelecting [Clear All Selections]

cancels all print settings.

All the Images on a Memory Card

2Use the or button to select images for

printing.

zSelection methods differ for the Print

Type settings (p. 85).

- (Standard)/ (Both)

Select an image, press the FUNC./

SET button and use the or

button to select the number of print

copies (up to 99).

- ) (Index

Select an image and press the

FUNC./SET button to select or

deselect it.

zYou can also select images in the

index playback mode.

zIf the camera is connected to a printer,

the button will light in blue while

images are being selected. At this time, press the

button, confirm that [Print] is selected, and when the FUNC./

SET button is pressed, printing will begin.

1(Print) Menu [Select All Images] .

See Menus and Settings (p. 19).

zOne copy of every image will be set to

print.

zSelecting [Clear All Selections]

cancels all print settings

zWhen the camera is connected to a

printer, the button will light blue. At this time, press

the button, confirm that [Print] is selected, and when

the FUNC./SET button is pressed, printing will begin.

2Select [OK] and press .

Number of Print

Copies

Index Print Selection

Print Settings/Transfer Settings

Setting the Print Style

After setting the print style, select the images for printing. The

following settings can be selected.

*Default setting

zThe output of some printers or photo developing services

may not reflect the specified print settings.

zPrint settings cannot be set for movies.

zImages are printed in order according to the file number.

zA maximum of 998 images can be selected.

zWhen [Print Type] is set to [Both], the number of copies can

be set. When it is set to [Index], the number of copies

cannot be set (only one copy will be printed).

Print Type

Standard* Prints one image per page.

Index Prints the selected images together at a

reduced size in an index format.

Both Prints the images in both the standard

and index formats.

Date (On/Off*) Adds the date to the print.

File No. (On/Off*) Adds the file number to the print.

Clear DPOF data (On*/Off) Clears all print settings after the images

print.

1(Print) Menu [Print Settings] .

See Menus and Settings (p. 19).

2Use the or button to select [Print

Type], [Date], [File No.], [Clear DPOF data]

and then use the or button specify the

settings.

You can use the camera to specify settings for images before

downloading to a computer. Refer to the Software Starter Guide for

instructions on how to transfer images to your computer.

The settings used on the camera comply with the Digital Print Order

Format (DPOF) standards.

zThe Date and File No. settings change according to the

Print Type as follows.

- Index

[Date] and [File No.] cannot be set to [On] at the same

time.

- Standard or Both

[Date] and [File No.] can be set to [On] at the same time,

however, the printable information may vary between

printers.

zImages dated using (Postcard Date Imprint mode)

(p. 33) are always printed with the date, regardless of the

[Date] setting. As a result, if [Date] is also set to [On], the

date will end up being printed twice on these images.

zDates print in the style specified in the [Date/Time] menu

(p. 22, Basic Guide p. 7).

Setting the DPOF Transfer Settings

The icon may display for a memory card with transfer

settings set by a different DPOF-compliant camera. These

settings will be overwritten by those set by your camera.

1 (Play) Menu .

See Menus and Settings (p. 19).

Print Settings/Transfer Settings

Single Images

All the Images on a Memory Card

Select [Order] and press .

z Selecting [Reset] cancels all transfer

order settings.

3Use the or button to

select an image to transfer

and press .

z Pressing the FUNC./SET button again

deselects the setting.

z You can also select images in the

index playback mode.

2Select [Mark all] and press .

z Selecting [Reset] cancels all transfer

order settings.

3Select [OK] and press .

z Images are transferred in order according to the file

number.

z A maximum of 998 images can be selected.

Transfer Selection

Viewing Images on a TV set

You can shoot or play back images on a television with the supplied AV cable.

1Turn off the camera and the TV.

2Connect the AV cable to the camera’s A/V

OUT terminal.

z Open the terminal cover by slipping a

fingernail under the right edge and

plug the AV cable in all the way.

3Plug the other ends of the

AV cable to the VIDEO IN

and AUDIO IN jacks on the

TV.

4Turn on the TV and switch it to video mode.

5Turn on the camera.

The video output signal can be switched (NTSC or PAL) to

accommodate different regional standards (p. 23). The default

setting varies between regions.

If the video system is set incorrectly, the camera output may

not display properly.

VIDEO

AUDIO

Yellow

Black

- NTSC: Japan, U.S.A., Canada, Taiwan and others

- PAL:

Europe, Asia (excluding Taiwan), Oceania and others

Troubleshooting

Camera

Camera will not operate.

Power is not turned on. z Press the power button (Basic

Guide p. 8).

Memory card slot/battery

cover is open.

z Confirm that the memory card slot

/battery cover is securely closed

(Basic Guide p. 5).

Batteries are loaded in the

wrong direction.

z Reload the batteries in the correct

direction (Basic Guide p. 5).

Batteries are not the right

type.

z Use only unused AA-size alkaline

batteries or Canon AA-size NiMH

batteries (p. 103).

Battery charge is low and

the camera will not operate.

(“Change the batteries”

message displays).

z Replace the camera batteries with

2 unused or fully charged batteries

(p. 103).

z Use the AC Adapter Kit ACK800

(sold separately) (p. 109).

Poor contact between

camera and battery

terminals.

z Wipe the battery terminals with a

clean dry cloth.

z Reload the batteries several times.

Sounds come from the camera interior.

The camera’s horizontal/

vertical orientation was

changed.

z The camera’s orientation

mechanism is operating. There is

no malfunction.

When the power is turned on

“Card locked!” message appears.

The SD memory card’s or

SDHC memory card’s write

protect tab is set to “Write

protect”.

z When recording to, erasing from

or formatting the memory card,

slide the write protect tab upward

(p. 105).

The Date/Time menu appears.

The lithium date/time battery

charge is depleted.

Replace the lithium date/time battery

(p. 116).

LCD monitor

The display darkens.

The image in the LCD

monitor will darken in strong

sunlight or bright light.

z This is a normal occurrence in

devices containing CCDs and does

not constitute a malfunction. This

image will not be recorded when

shooting still photos, but it will be

recorded when shooting movies.

Display flickers.

Display flickers when shot

under fluorescent lighting.

z This is not a camera malfunction

(flickering recorded in movies, but

not in still images).

A bar of light (red, purple) appears on the LCD

monitor.

Sometimes appears when

shooting a bright subject,

such as the sun or other

light source.

z This is a normal occurrence in

devices containing CCDs and

does not constitute a malfunction.

This bar of light will not be

recorded when shooting still

photos, but it will be recorded

when shooting movies.

appears.

A slow shutter speed has

likely been selected

because of insufficient

lighting.

z Set the IS Mode to any setting

other than [Off] (p. 28).

z Raise the ISO speed (p. 62) or set

the flash to any setting other than

(flash off) (Basic Guide p. 12),

or secure the camera to

something, such as a tripod.

Troubleshooting

appears.

This displays when using a

memory card that has print

settings or transfer settings

set by other DPOF-

compliant cameras.

z These settings will be overwritten

by those set by your camera

(p. 83).

Noise displays./Subject’s movements are

irregular.

Camera automatically

lightened the image

displayed on the LCD

monitor to make it easier to

see when shooting in a dark

area (p. 12).

z There is no effect on the recorded

image.

Shooting

Camera will not record.

Mode switch is set to

(playback).

z Set the mode switch to

(shooting) (Basic Guide p. 8).

Flash is charging. z When the flash is charged, the

indicator will light orange.

Shooting is now possible (Basic

Guide p. 4).

Memory card is full. z Insert a new memory card (Basic

Guide p. 5).

z If required, download the images

to a computer and erase them

from the memory card to make

space.

Memory card is not

formatted correctly.

z Format the memory card (p. 26).

z If reformatting does not work, the

memory card logic circuits may be

damaged. Consult the nearest

Canon Customer Support Help

Desk.

SD memory card or SDHC

memory card is write

protected.

z Slide the write protect tab upward

(p. 105).

Image Seen in viewfinder vs. recorded image

Usually the recorded image

contains more of the scene

than is seen in the viewfinder.

Confirm the actual image size with the

LCD monitor. Use the LCD monitor

when taking close-up shots (p. 12).

Image is blurred or out of focus.

AF-assist Beam is set to

[Off].

z In dark places where it is difficult for

the camera to focus, the AF-assist

Beam will emit to assist focusing. As

the AF-assist Beam will not function

when turned off, set it [On] to

activate it (p. 20). Take care not to

obstruct the AF-assist Beam with

your hand when used.

The camera moves when

the shutter button is

pressed.

Set the IS Mode to any setting other

than [Off] (p. 28).

Setting the self-timer to (2

seconds) delays the shutter release

for 2 seconds after the shutter

button is pressed and allows the

camera to stop shaking, thus

preventing a blurred image (Basic

Guide p. 16).

Even better results can be obtained

by placing the camera on a stable

surface or by using a tripod to shoot.

Subject is out of focal range. z Shoot with the subject at the

correct shooting distance (p. 119).

The subject is hard to focus

on.

z Use the focus lock, AF lock or

manual focus to shoot (p. 46).

Troubleshooting

Subject in recorded image is too dark.

Insufficient light for shooting. z Set the flash to (Flash on)

(Basic Guide p. 12).

The subject is

underexposed because the

surroundings are too bright.

z Set the exposure compensation to

a positive (+) setting (p. 51).

z Use the AE lock or spot metering

functions (pp. 48, 50).

Subject is too far away for

flash to reach.

z Shoot within correct shooting

distance of the subject when using

the built-in flash (p. 120).

z Raise the ISO speed and then

shoot (p. 62).

Subject in recorded image is too bright, or

image flashes white.

Subject is too close, making

the flash too strong.

z Shoot within correct shooting

distance of the subject when using

the built-in flash (p. 120).

The subject is overexposed

because the surroundings

are too dark.

z Set the exposure compensation to a

negative (–) setting (p. 51).

z Use the AE lock or spot metering

functions (pp. 48, 50).

Too much light is shining

directly into the camera, or

is being reflected off the

subject.

z Change the shooting angle.

Flash is set to on. Set the flash to (Flash off) z

(Basic Guide p. 12).

Image contains noise.

ISO speed is too high. z Higher ISO speeds and (High

ISO Auto) setting may increase

image noise. For higher image

quality, use as low an ISO speed

as possible (p. 62).

z In , , , , and

modes in the mode, the ISO

speed increases and noise can

appear.

White dots appear on the image.

Light from the flash has

reflected off dust particles or

insects in the air. This is

particularly noticeable when

shooting using the wide

angle or when you increase

the aperture value in the

aperture-priority AE mode.

z This is a phenomenon that occurs

with digital cameras and does not

constitute a malfunction.

Eyes appear red.

Light is reflected back from

the eyes when the flash is

used in dark areas.

z Use the (red-eye reduction)

mode (Basic Guide p. 12). For this

mode to be effective, the subject

must be looking right at the red-

eye reduction lamp. Try asking

them to look directly at the lamp.

z Even better results can be

obtained by increasing the lighting

in indoor settings or approaching

closer to the subject. The shutter

will not activate for approximately

1 second after the red-eye

reduction lamp fires in order to

improve the effect.

Troubleshooting

Continuous shooting slows down.

The memory card’s

performance has dropped.

z To enhance the continuous

shooting performance, you are

recommended to format the

memory card in the camera after

you save all its images to your

computer (p. 26).

Recording images to memory card takes a long

time.

Memory card was formatted

in another device.

z Use a memory card formatted in

your camera (p. 26).

Lens will not retract.

Memory card slot/battery

cover was opened with

power on.

z After closing the memory card slot/

battery cover, turn the power on

then back off (Basic Guide p. 5).

Shooting movies

The recording time may not display properly or

shooting may stop unexpectedly.

The following types of

memory cards are used.

- Slow recording cards.

- Cards formatted on a

different camera or a

computer.

- Cards which have had

images recorded and

erased repeatedly.

z Although the recording time may

not display properly during

shooting, the movie will be

recorded correctly on the memory

card. Recording time will display

properly if you format the memory

card in this camera (excluding

slow recording memory cards)

(p. 26).

“!” displayed on the LCD monitor in red and

shooting automatically stopped.

There is insufficient free

space in the camera’s built-

in memory.

Try the following procedures.

- Format the card with a low level

format before shooting (p. 26)

- Lower the recording pixels or the

frame rate (p. 37)

- Use a high-speed memory card

(SDC-512MSH, etc.)

Zoom does not operate.

Zoom lever was pressed

while shooting in movie

mode.

z Operate the zoom before shooting

in movie mode (Basic Guide

p. 12). Note the digital zoom is

available while shooting, but only

in Standard movie mode.

Playback

Cannot play back.

You attempted to play back

images shot with another

camera or images edited

with a computer.

z Computer images that cannot be

played back will play back if they

are added to the camera using the

supplied software program

ZoomBrowser EX or

ImageBrowser.

File name was changed with

a computer or file location

was changed.

z Set the file name or location on the

file format/structure of the camera.

(Refer to the Software Starter

Guide for details).

Movies cannot be edited.

Some movies shot with another camera cannot be edited.

Troubleshooting

Movies do not play back correctly.

Movies recorded with high recording pixels and frame rates may

momentarily stop playing if played on slow reading memory

cards.

You may experience frame dropping and audio breakup when

playing back a movie on a computer with insufficient system

resources.

Movies recorded at the

(Fast Frame Rate) setting and

with the video signal set to the

PAL format, may play back

with a frame rate lower than

the recorded one when output

to a TV or video. You can play

every frame by using the slow

motion playback.

z To check the images at the

original frame rate, you are

recommended to play the movie

back on the camera’s LCD monitor

or on a computer.

Reading images from memory card is slow.

Memory card was formatted

in another device.

z Use a memory card formatted in

your camera (p. 26).

Battery

Batteries consumed quickly.

Batteries are not the right

type.

z Use only unused AA-size alkaline

batteries or Canon AA-size NiMH

batteries (p. 103).

Battery capacity drops due

to low ambient

temperatures.

z If shooting in a cold location, warm

the batteries such as by placing

them in your pocket before using

them.

Battery terminals are dirty. Wipe the terminals well with a dry z

cloth before use.

Reload the batteries several times.

If using Canon AA-size NiMH batteries

As the batteries have not

been used for over a year,

their recharging capacity

has decreased.

z Their charging performance

should return to normal after fully

recharging and fully depleting

them over several times.

Battery life has been

exceeded.

z Replace both batteries with new

ones.

TV monitor output

Image is distorted or not showing on TV monitor.

Incorrect video system

setting.

z Set the video system to the

appropriate setting, NTSC or PAL,

for your TV (p. 23).

Shooting in Stitch Assist

mode.

z The output will not appear on a TV

in Stitch Assist mode. Shoot in a

different shooting mode (Basic

Guide p. 9).

Printing with a direct print compatible

printer

Cannot print

The camera and printer are

not properly connected.

z Securely connect the camera and

printer with the specified cable.

The printer power is not

turned on.

z Turn on the printer power.

The print connection method

is not correct.

z In the (Set up) menu, select

[Print Method] and select [Auto]

(p. 23).

List of Messages

The following messages may appear on the LCD monitor during

shooting or playback. Please refer to the Direct Print User Guide for

the messages that display during a printer connection.

Busy...

Image is being recorded to, or read from, memory card. The

playback mode is starting up.

No memory card

You turned on the camera without a memory card installed, or with a

memory card installed in the wrong orientation (Basic Guide p. 5).

Card locked!

The SD memory card or SDHC memory card is write-protected.

Cannot record!

You attempted to shoot an image without a memory card

installed, with a memory card installed in the wrong orientation,

or attempted to attach a sound memo to a movie.

Memory card error

There may be something wrong with the memory card. By

formatting the malfunctioning memory card with the camera, you

may be able to continue using it. However, if this error message

appears even when using the supplied memory card, contact

your Canon Customer Support Help Desk as there may be a

problem with the camera.

Memory card full

Memory card is full of images and no more can be recorded or

saved. Or no more image settings or sound memos can be

recorded.

100

Naming error!

The image could not be created because there is an image with

the same name as the folder that the camera is attempting to

create, or the highest possible file number has already been

reached. In the Set up menu, set [File Numbering] to [Auto

Reset]; alternatively, save all the images you wish to retain onto

a computer, then reformat the memory card. Please note that

formatting will erase all the existing images and other data.

Change the batteries

Battery charge is insufficient to operate the camera. Replace

both batteries immediately with unused AA-size alkaline batteries

or fully charged Canon AA-size NiMH batteries.

No image

No images recorded on memory card.

Image too large

You attempted to play back an image larger than 4992 x 3328

pixels or with a large data size.

Incompatible JPEG format

You attempted to play back an incompatible JPEG image (edited

with a computer, etc.).

RAW

You attempted to play back a RAW image.

Unidentified Image

You attempted to play back an image with corrupted data, an

image with a recording type specific to another manufacturer’s

camera, or an image that has been downloaded to a computer

and altered.

Cannot magnify!

You attempted to magnify an image recorded in a different camera or

data type, an image edited with a computer, or a movie.

103

Appendix

Battery Handling

Battery Charge

The following icon and message will display.

Battery Handling Precautions

zz This camera uses AA-size alkaline batteries or Canon AA-

size NiMH batteries (sold separately).

While it is possible to use AA-size nickel-cadmium batteries,

performance is unreliable and their use is not recommended.

zz Since the performance of alkaline batteries may differ

according to brand, the operating time of the batteries you

purchase may not be as long as the batteries that came with

the camera.

zz When using the camera under low temperature conditions

or over long periods, you are recommend to use of Canon

AA-size NiMH batteries (sold separately).

Camera operating time may shorten at low temperatures when

alkaline batteries are used. Also due to their specifications,

alkaline batteries may expire faster than NiMH batteries.

zz Never mix unused and partially used batteries.

The partially used batteries may leak.

zz Do not install the batteries with their terminals ( and )

reversed.

zz Do not mix batteries of different types or from different

manufacturers.

Battery charge is low. If using

the camera for an extended

period, replace the batteries

as soon as possible.

Change the batteries

Batteries are fully depleted

and the camera can no longer

operate. Replace the batteries

immediately.

104

zz Before installing the batteries, wipe the battery terminals

well with a dry cloth.

If the battery terminals are soiled with oil from one’s skin or other

dirt, the number of recordable images may be considerably

diminished, or reduced usage time.

zz At low temperatures, battery performance may be reduced

and the low battery icon ( ) may appear earlier than usual.

Under these conditions, restore the battery performance by

warming it in a pocket immediately before use.

zz Do not put the batteries into a pocket together with metallic

items such as a key ring.

The batteries may be short circuited.

zz When not using the camera for long periods, remove the

batteries from the camera and store them separately.

If the batteries are left inside the camera, the camera may

become damaged from battery leakage.

WARNING

Never use damaged batteries or batteries whose outer seal is

completely or partially missing or peeled off, as there is risk that

such batteries may leak, overheat, or burst. Always check the

seals on store-bought batteries before loading them, as some

batteries may come with defective seals. Do not use batteries with

defective seals.

Never use batteries that look like this.

Batteries with all or part of the seal (electrical insulation

sheath) peeled off.

The positive electrode (plus terminal) is flat.

The negative terminal is correctly formed (protruding

from the metal base), but the seal does not extend up

over the edge of the metal base.

105

Appendix

Handling the Memory Card

SD memory card or SDHC memory card

Write Protect Tab

Cautions When Handling

zz Memory cards are high-precision electronic devices. Do not

bend them, apply force to them, or subject them to shocks

or vibration.

zz Do not attempt to disassemble or alter the memory card.

zz Do not allow dirt, water or foreign objects to contact the

terminals on the back of the card. Do not touch the

terminals with your hands or metal objects.

zz Do not peel away the original label on the memory card or

cover it with another label or sticker.

zz When writing on the memory card, do not use a pencil or

ball-point pen. Only use a soft point pen (e.g. felt-tip pen).

zz Do not use or store memory cards in the following

locations.

• Locations subject to dust or sand

• Locations subject to high humidity and high temperatures

zz Since some or all of the data recorded on the memory card

may be corrupted or erased by electrical noise, static

electricity or card malfunction, making a backup copy of

important data is recommended.

Slide the switch up.

Slide the switch down

(you can protect the

images and other

data on the card)

Write Protect Tab

Writing/Erasing Possible Writing/Erasing Impossible

106

Formatting

zz Please note that formatting (initializing) an memory card

erases all data, including protected images.

zz You are recommended to use memory cards that have been

formatted in your camera.

• The card supplied with the camera may be used without further

formatting.

• When the camera is malfunctioning, a corrupted memory card

might be the cause. Reformatting the memory card may solve

the problem.

• When a non-Canon brand memory card is malfunctioning,

reformatting it may solve the problem.

• Memory cards formatted in other cameras, computers, or

peripheral devices may not operate correctly in this camera.

When that happens, reformat the memory card with this

camera.

zz If formatting in the camera does not work properly, turn the

camera off and re-insert the memory card. Then turn the

camera back on and format again.

zz Be careful when transferring or disposing of a memory

card. Formatting or erasing the data on a memory card

merely changes the file management information on the

card and does not ensure that its contents are completely

deleted.

When disposing of a memory card, take precautions, such

as physically destroying the card, to prevent personal

information leaks.

107

Appendix

Using Rechargeable Batteries

(Battery and Charger Kit CBK4-300)

This kit includes a battery charger and four rechargeable AA-size

NiMH (nickel metal hydride) batteries. Charge batteries as shown

below. Recharging is also possible using two batteries.

• After inserting the batteries, plug the charger (CB-5AH) into an

outlet, or attach the power cord to the charger (CB-5AHE, not

shown) and plug the other end into an outlet.

• Do not insert and charge additional batteries once charging has begun.

• The charge indicator blinks while charging, then remains lit when

charging is finished.

Using the Power Kits (Sold Separately)

z The CB-5AH/CB-5AHE battery charger can only be used

to charge Canon AA-size NiMH batteries NB-3AH and NB-

2AH. Please do not attempt to charge other type of battery.

z Do not mix batteries with different purchase dates or

different charge states. When recharging batteries, always

recharge both of them at the same time.

z Do not attempt to recharge fully charged batteries, as doing so

may reduce or impair battery performance. Also, do not charge

batteries for more than 24 consecutive hours.

z Do not recharge batteries in enclosed areas that tend to

retain heat.

z Do not recharge the batteries until the LCD monitor

displays the “Change the batteries” message. Repeatedly

recharging batteries before they become fully depleted

may cause batteries to lose capacity.

Charge Indicator

To a power outlet To a power outlet

4 batteries 2 batteries

108

z Wipe the battery terminals well with a dry cloth in the

following situations, as the terminals may be soiled with oil

from one’s skin or other dirt:

- If the battery usage time has considerably diminished

- If the number of recordable images has considerably

diminished

- When charging the batteries (insert and remove the

batteries two or three times before charging)

- When charging completes in a space of a few minutes

(the battery charger indicator remains lit)

z You may not be able to fully charge the batteries due to

their specifications right after purchase or after long

periods of nonuse. If this happens, after fully charging

them, use the batteries until their charge is depleted. After

doing this several times, battery performance will be

restored.

z If you store batteries for a long period of time (about 1

year), it is recommended that you fully deplete the

batteries in the camera and to then store them at room

temperature (0 to 30°C/32 to 90°F) in low humidity. Storing

them in a fully charged condition can shorten their lifespan

or degrade their performance.

Again, if you do not use batteries for more than 1 year, fully

charge them once a year and deplete them in the camera

before storing them.

z If the battery usage time has become considerably low

despite wiping the terminals and charging them until the

battery charger indicator remains lit, this may indicate that

the batteries have reached the end of their lifespan.

Replace them with new batteries. If you are purchasing

new batteries, look for Canon AA-size NiMH batteries.

z Leaving batteries in the camera or charger may result in

damage from battery leakage. When not in use, remove

the batteries from the camera or charger and store them in

a cool, dry location.

109

Appendix

Using the AC Adapter Kit ACK800

It is best to power the camera with AC Adapter Kit ACK800 (sold

separately) when you are using it for long periods of time or

connecting it to a computer.

z It takes approximately 4 hours 40 minutes for the charger to

fully recharge the batteries after they have been depleted.

When two batteries are placed on each side of the charger,

recharging will take approximately two hours (as

determined by testing at Canon facilities).

Charge batteries in an environment where the temperature

is in the range of 0 to 35°C (32 to 95°F).

z The charging time varies according to the ambient

temperature and to the battery charge state.

z The battery charger may emit noise while charging. This is

not a malfunction.

z Battery/Charger Kit CBK4-200 can also be used.

Turn the camera power off before connecting or

disconnecting the AC adapter.

1Connect the power cord to

the compact power adapter

first and then plug the other

end into the power outlet.

2Open the terminal cover and

attach the cord to the DC IN

terminal.

Compact Power

Adapter CA-PS800

DC IN Terminal

110

The camera supports use of the separately sold Wide Converter

WC-DC58N, Tele-converter TC-DC58N and Close-up lens 250D

(58mm). In order to attach these lenses, you also need to use the

separately sold Conversion Lens Adapter LA-DC58G.

Wide Converter WC-DC58N

Use this converter for taking wide-angle shots. The wide converter

changes the focal length of the camera body’s lens by a factor of

0.7x (the thread diameter is 58 mm).

Tele-converter TC-DC58N

This lens is used for taking telephoto shots. The lens changes the

focal length of the camera body’s lens by a factor of 1.75x. (the

thread diameter is 58 mm).

Using the Lenses (Sold Separately)

z When attaching the wide converter, tele-converter or

close-up lens be sure to screw it on securely. If they come

loose, they may fall from the lens adapter, posing risk of

injury from shattered glass.

z Never look into the sun or into strong light through the wide

converter, tele-converter or close-up lens as this can result

in blindness or impairment of vision.

z If you use the flash when shooting with these attachments,

the outer area of the recorded image (especially lower right

corner) will come out relatively dark.

z When using the tele-converter, please set the focal length

to the telephoto end. At other zoom settings, the image will

appear as if its corners have been cut off.

z When using the wide converter, please set the camera to

the wide angle end.

z If you use the viewfinder for shooting, a portion of the view

will be blocked by these attachments. Please use the LCD

monitor.

It is not possible to attach a lens hood or filter to the wide

converter or tele-converter.

Specyfikacje produktu

Marka:	Krüger&Matz
Kategoria:	smartfon
Model:	Flow 4+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Krüger&Matz Flow 4+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje smartfon Krüger&Matz

Krüger&Matz Live 10 KM0499 Instrukcja

16 Września 2024

Krüger&Matz Live 9 KM0497 Instrukcja

15 Września 2024

Krüger&Matz Drive 5 mini Instrukcja

15 Września 2024

Krüger&Matz Flow 4+ Instrukcja

15 Września 2024

Krüger&Matz KM0468 Instrukcja

13 Września 2024

Krüger&Matz KM0929 Instrukcja

11 Września 2024

Krüger&Matz Drive 9 KM0495 Instrukcja

11 Września 2024

Krüger&Matz Drive 2 Instrukcja

11 Września 2024

Krüger&Matz Move 6 mini Instrukcja

11 Września 2024

Krüger&Matz Drive 3 Instrukcja

11 Września 2024

Instrukcje smartfon

Najnowsze instrukcje dla smartfon

Kalley Element PRO 2 Instrukcja

10 Marca 2025

Motorola Titanium Instrukcja

15 Stycznia 2025

Acer Liquid Z4 Instrukcja

15 Stycznia 2025

HMD Key Instrukcja

14 Stycznia 2025

Doro 7030 Instrukcja

13 Stycznia 2025

OK OMP 90 Instrukcja

12 Stycznia 2025

HTC Desire 500 Instrukcja

12 Stycznia 2025

HTC 7 Mozart Instrukcja

12 Stycznia 2025

Alcatel Pixi 4 Plus Power Instrukcja

12 Stycznia 2025

HTC Desire 200 Instrukcja

12 Stycznia 2025