Instrukcja obsługi Kress KUE12.9
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kress KUE12.9 (12 stron) w kategorii piła. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Lithium-Ion Brushless Circular Saw
KUE12 KUE12.9
SAFETY AND OPERATING MANUAL
3
Lithium-Ion Brushless Circular Saw
KUE12 KUE12.9
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
g) Recommendation that the tool always
be supplied via a residual current device
having a rated residual current of 30 mA
or less
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
Specyfikacje produktu
| Marka: | Kress |
| Kategoria: | piła |
| Model: | KUE12.9 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kress KUE12.9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piła Kress
5 Października 2024
23 Września 2024
9 Sierpnia 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
Instrukcje piła
- piła AEG
- piła Worx
- piła Milwaukee
- piła Stihl
- piła Bosch
- piła Parkside
- piła Festool
- piła Stanley
- piła Black & Decker
- piła Scheppach
- piła Proxxon
- piła Lider
- piła Hazet
- piła DeWalt
- piła Einhell
- piła Silverline
- piła Husqvarna
- piła Makita
- piła Ozito
- piła Fuxtec
- piła RYOBI
- piła DEDRA
- piła Trotec
- piła Meec Tools
- piła Güde
- piła Texas
- piła Zipper
- piła Solo
- piła Ferrex
- piła McKenzie
- piła Ferm
- piła Hitachi
- piła Fieldmann
- piła PowerPlus
- piła Vonroc
- piła HiKOKI
- piła Workzone
- piła Masport
- piła Metabo
- piła Cocraft
- piła Snow Joe
- piła Yellow Garden Line
- piła Ideal
- piła Kinzo
- piła Gamma
- piła Varo
- piła Batavia
- piła Protool
- piła Elu
- piła Lux Tools
- piła Triton
- piła Fleurelle
- piła Evolution
- piła Dual Saw
- piła Elektra Beckum
- piła Toolson
- piła Dexter Power
- piła Toledo
- piła Graule
- piła Exakt
- piła Mac Allister
Najnowsze instrukcje dla piła
15 Października 2024
15 Października 2024
6 Października 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024