Instrukcja obsługi Kress KG259E.9

Kress nożyce do żywopłotu KG259E.9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kress KG259E.9 (16 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
SAFETY AND OPERATING MANUAL
Cordless Hedge Trimmer
KG259E KG259E.X
KG260E KG260E.X
3
Cordless Hedge Trimmer
KG259E KG259E.X
KG260E KG260E.X
PRODUCT SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control
of the tool in unexpected situations.

Specyfikacje produktu

Marka: Kress
Kategoria: nożyce do żywopłotu
Model: KG259E.9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kress KG259E.9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Kress

Kress

Kress KG259E.9 Instrukcja

8 Lipca 2024
Kress

Kress KG260E.9 Instrukcja

8 Lipca 2024
Kress

Kress KG262.9 Instrukcja

8 Lipca 2024
Kress

Kress KG806E.9 Instrukcja

8 Lipca 2024
Kress

Kress KG285.9 Instrukcja

8 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024