Instrukcja obsługi Kreator KRT706320
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kreator KRT706320 (7 stron) w kategorii dalmierz. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
KRT706320 EN
Copyright © 9 VARO www.varo.com 201 P a g e | 1
1 APPLICATION .................................................................................. 2
2 DESCRIPTION (FIG. 1) .................................................................... 2
3 PACKAGE CONTENT LIST ............................................................. 2
4 SYMBOLS ........................................................................................ 2
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 2
5.1 Work area ................................................................................................................ 2
5.2 Electrical safety ....................................................................................................... 3
5.3 Personal safety 3 .......................................................................................................
5.4 Power tool use and care ......................................................................................... 3
5.5 Service ..................................................................................................................... 4
6 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 4
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES .......... 4
8 USE ................................................................................................... 4
8.1 Inserting/Replacing the batteries ........................................................................... 4
8.2 Initial operation ....................................................................................................... 4
8.3 Switching on and o ............................................................................................... 5
8.4 Lock mode ............................................................................................................... 5
8.5 Working Advice ....................................................................................................... 5
8.5.1 Working with the tripod .............................................................................................. 5
8.5.2 Holding laterally against a wall or object .................................................................... 5
9 MAINTENANCE AND STORAGE .................................................... 5
10 TECHNICAL DATA .......................................................................... 6
11 SERVICE .......................................................................................... 6
12 ENVIRONMENT ............................................................................... 6
13 DECLARATION OF CONFORMITY ................................................ 7
KRT706320 EN
Copyright © 9 VARO www.varo.com 201 P a g e | 2
CROSS-LINE LASER
KRT706320
1 APPLICATION
The measuring tool is intended for determining and checking horizontal and vertical lines. The
measuring tool is suitable exclusively for operation in enclosed working sites.
WARNING! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION (FIG. 1)
1. Exit opening for laser beam
2. 360° laser
3. Laser selection key
4. On/o switch
5. Tripod mount 1/4"
6. Battery lid
7. Laser warning label
3 PACKAGE CONTENT LIST
▪ Remove all packing materials.
▪ Remove remaining packaging and transit supports (if existing).
▪ Check the completeness of the packing content.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING: Packing materials are no toys! Children must not play with
plastic bags! Danger of suocation!
1 x cross-line laser 4 x 1.5 V AA batteries
If parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Warning / Danger!
Attention Laser radiation! Do not
look into the beam. Laser class 2.
Read manual before us e.
In accordance with essential
requirements of the European
directive(s).
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, re and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
5.1 Work area
▪ Keep work area clean and well lit. Cluttered and dark areas invite accidents.
KRT706320 EN
Copyright © 9 VARO www.varo.com 201 P a g e | 3
▪ Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
▪ Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2 Electrical safety
▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
▪ Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
▪ Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
▪ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
▪ When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
▪ If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
5.3 Personal safety
▪ Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
▪ Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
▪ Avoid accidental starting. Ensure the switch is in the o position before plugging in.
Carrying power tools with your nger on the switch or plugging in power tools that have
the switch on invites accidents.
▪ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
▪ Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
▪ devices are provided for the connection of dust extraction and collection facilities, ensure If
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
▪ Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
▪ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Specyfikacje produktu
| Marka: | Kreator |
| Kategoria: | dalmierz |
| Model: | KRT706320 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kreator KRT706320, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje dalmierz Kreator
29 Sierpnia 2024
19 Sierpnia 2024
Instrukcje dalmierz
- dalmierz PeakTech
- dalmierz Leica
- dalmierz Milwaukee
- dalmierz Bosch
- dalmierz Toolcraft
- dalmierz Stanley
- dalmierz DeWalt
- dalmierz Tripp Lite
- dalmierz Makita
- dalmierz Chauvin Arnoux
- dalmierz IFM
- dalmierz DEDRA
- dalmierz Hilti
- dalmierz Trotec
- dalmierz Velleman
- dalmierz Meec Tools
- dalmierz Pyle
- dalmierz Westfalia
- dalmierz Bresser
- dalmierz Bushnell
- dalmierz Berger & Schröter
- dalmierz Stabila
- dalmierz SereneLife
- dalmierz Klein Tools
- dalmierz Fieldmann
- dalmierz Workzone
- dalmierz Halo
- dalmierz Metabo
- dalmierz Laserliner
- dalmierz Cocraft
- dalmierz ADA
- dalmierz Tacklife
- dalmierz Calculated Industries
- dalmierz Praktica
- dalmierz Sola
- dalmierz PCE Instruments
- dalmierz Callaway
- dalmierz Leupold
Najnowsze instrukcje dla dalmierz
5 Października 2024
2 Października 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
27 Września 2024