Instrukcja obsługi Kramer VS-34


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer VS-34 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
VS- Card 34 Family Quick Start
P/N:
2 9 0 0 - 3 0 1 2 0 9 QS
Rev:
1
Scan for full manual
VS-34 Family Card Installation Sheet
Quick Start Guide
This guide helps you install and use your VS-34 Family Card for the rst time.
Go to www.kramerav.com/downloads/VS-34FD to download the latest user manual.
The attached card mounts in one of the slots on the rear of the chassis. Slots are numbered from left to right.
(The process for inserting cards is the same for all cards and the figures are for illustration purposes only.)
Input and output cards m be mounted in any slotay .
To install an I/O card:
1. Power o the machine and all devices connected to it.
2. Using a Phillips screwdriver, loosen the screws at the top and bottom of the blanking plate.
3. Remove the blanking plate from the slot and store it for possible future use.
4. Remove the new card from its shipping box and anti-ESD bag.
5. Holding the card by the lower handle, align the card with the plastic guide rails.
6. Slide the card into the chassis until the front of the card contacts the connector inside the chassis.
7. Press the card rmly into the slot until the
connector plate is ush with the rear panel of
the chassis and the connector is fully seated.
8. Using a Phillips screwdriver, tighten the
retaining screws at the top and bottom of the
card to secure it to the chassis.
9. Power on the machine and follow the
procedure in the user manual to congure
the new card.
10. Power on the peripheral devices.
VS- HDMI Card 34
For optimum range and performance use the recommended Kramer cables available at www.kramerav.com.
Using third-party cables may cause damage!
Safety Instructions
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the power cord that is supplied with the unit.
Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualied personnel only.
Warning: Disconnect the power and unplug the unit from the wall before installing.
See for updated safety information www.kramerav.com


Specyfikacje produktu

Marka: Kramer
Kategoria: nieskategoryzowany
Model: VS-34
Kolor produktu: Czarny
Wysokość produktu: 20 mm
Szerokość produktu: 250 mm
Głębokość produktu: 130 mm
Waga produktu: 300 g
Szerokość opakowania: 165 mm
Wysokość opakowania: 59 mm
Głębokość opakowania: 345 mm
Certyfikaty: CE, RoHs, WEEE
Zakres temperatur (eksploatacja): 0 - 40 °C
Zakres wilgotności względnej: 10 - 90 %
Pobór mocy: 21.5 W
Waga wraz z opakowaniem: 500 g
Zakres temperatur (przechowywanie): -40 - 70 °C
Port RS-232: 2
Ilość portów RJ-45: 1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kramer VS-34, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Kramer

Kramer

Kramer FC-113 Instrukcja

5 Sierpnia 2024
Kramer

Kramer VP-428H2 Instrukcja

4 Sierpnia 2024
Kramer

Kramer FC-332 Instrukcja

4 Sierpnia 2024
Kramer

Kramer 482XL Instrukcja

4 Sierpnia 2024
Kramer

Kramer VP-451 Instrukcja

4 Sierpnia 2024
Kramer

Kramer VP-510 Instrukcja

4 Sierpnia 2024
Kramer

Kramer VS-34 Instrukcja

4 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024