Instrukcja obsługi Korg SP170
Korg
Elektronika fortepianowa
SP170
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Korg SP170 (21 stron) w kategorii Elektronika fortepianowa. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/21
DIGITAL PIANO
Owner’s manual
Manuel d’utilisation
Bedienungsanleitung
E F G 1
MIDI implementation chart
2
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Unauthorized changes or modication to this system can void the
user’s authority to operate this equipment.
Notice regarding disposal (EU only)
When this “crossed-out wheeled bin” symbol is displayed
on the product, owner’s manual, baery, or baery pack-
age, it signifies that when you wish to dispose of this
product, manual, package or baery you must do so in an
approved manner. Do not discard this product, manual,
package or baery along with ordinary household waste.
Disposing in the correct manner will prevent harm to human
health and potential damage to the environment. Since the cor-
rect method of disposal will depend on the applicable laws and
regulations in your locality, please contact your local administra-
tive body for details. If the baery contains heavy metals in ex-
cess of the regulated amount, a chemical symbol is displayed be-
low the “crossed-out wheeled bin” symbol on the battery or
baery package.
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specica-
tions and voltage requirements that are applicable in the country
in which it is intended that this product should be used. If you
have purchased this product via the internet, through mail order,
and/or via a telephone sale, you must verify that this product is
intended to be used in the country in which you reside.
WARNING: Use of this product in any country other than that for
which it is intended could be dangerous and could invalidate the
manufacturer’s or distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise
your product may be disqualied from the manufacturer’s or dis-
tributor’s warranty.
* All product names and company names are the trademarks or
registered trademarks of their respective owners.
Precautions
Location
Using the unit in the following locations can result in a
malfunction.
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic elds
Power supply
Please connect the designated AC adapter to an AC outlet of
the correct voltage. Do not connect it to an AC outlet of volt-
age other than that for which your unit is intended.
Interference with other electrical de-
vices
Radios and televisions placed nearby may experience re-
ception interference. Operate this unit at a suitable distance
from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the
switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth.
Do not use liquid cleaners such as benzene or thinner, or
cleaning compounds or ammable polishes.
Keep this manual
Aer reading this manual, please keep it for later reference.
Keeping foreign matter out of your
equipment
Never set any container with liquid in it near this equip-
ment. If liquid gets into the equipment, it could cause a
breakdown, re, or electrical shock.
Be careful not to let metal objects get into the equipment.
If something does slip into the equipment, unplug the AC
adapter from the wall outlet. Then contact your nearest
Korg dealer or the store where the equipment was pur-
chased.
3
Internal Setup and Connections
1. Connecting the Power (Figure 1)
• Start with the SP-170 turned OFF. Connect the supplied AC adapter to the power
cord. Insert the DC plug end into the [DC12V] jack on the rear panel. Next, plug
the power cord into an AC outlet.
Pass the AC adapter cord through the cord hook so that the plug will not be re-
moved from the jack accidentally. When you unhook the cord, do not pull the
cord with force.
Be sure to use the supplied AC adapter. Using other AC adapters may cause the
unit to malfunction.
Be sure to plug the unit into an AC outlet of an appropriate voltage.
2. Turning the SP-170 ON
• Set the power switch on the rear panel to the “ON” position. (Figure 2)
The power LED located to the le of the music stand will light up. (Figure 3)
• To turn the unit o, set the power switch to “STANDBY.” The power LED will go
dark.
3. Adjust the volume
• Rotate the [VOLUME] knob on the rear panel clockwise toward “MAX” to raise
the volume level. Rotate it counter-clockwise toward “MIN” to lower the level.
(Figure 2)
The [VOLUME] knob controls the output level of the built-in speakers and the
headphones jacks.
■ Usingheadphones
When you plug in headphones, the built-in speakers will be muted. This is useful
when you want to play the keyboard in the evening without bothering your family or
neighbors. The SP-170 features two headphone jacks so that two people can enjoy play-
ing and listening.
• Insert the stereo headphone plug into one of the [PHONES] jacks on the rear panel.
(Figure 2)
If your headphones feature a standard-to-mini adapter plug, be sure to hold the
adapter plug when you connect or disconnect the headphones.
To protect your hearing, do not listen to loud, high-volume sounds for a long pe-
riod of time through headphones.
■ Connectingaudiocomponents
You can use the [PHONES] jacks as line-out jacks to connect powered speakers or au-
dio components to the keyboard. For such connections, use commercially-available
cables that are appropriate for the components.
Before connecting audio components, make sure that you turn o the power to
the unit and the audio components. Otherwise, damage or malfunction to the
unit or components may occur.
■ Usingthemusicstand
• Insert the legs of the supplied music stand into the dedicated groove located in the
middle of the top panel. (Figure 4)
To AC
outlet
Figure 1
AC adapter
DC plug
Power cord for AC adapter
Cord hook
Be careful not
to bend this
part too much
when you hook
the power cord.
Volume knob
Power switch
Headphone jacks
Figure 2
Figure 3 Power LED
Figure 4
Specyfikacje produktu
| Marka: | Korg |
| Kategoria: | Elektronika fortepianowa |
| Model: | SP170 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Korg SP170, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Elektronika fortepianowa Korg
25 Września 2024
25 Września 2024
Instrukcje Elektronika fortepianowa
- Elektronika fortepianowa Yamaha
- Elektronika fortepianowa Alesis
- Elektronika fortepianowa Medeli
- Elektronika fortepianowa Kawai
- Elektronika fortepianowa Pianodisc
- Elektronika fortepianowa Stagg
Najnowsze instrukcje dla Elektronika fortepianowa
24 Września 2024
12 Września 2024
12 Września 2024
6 Września 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024