Instrukcja obsługi Konig SAS-AHD1004

Konig Rejestrator głosu SAS-AHD1004

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig SAS-AHD1004 (49 stron) w kategorii Rejestrator głosu. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/49
Security
Sets
SAS-AHDxx
User manual
Main Board Sensor Industrial Embedded Microprocessor
Operating System Embedded LINUX operating system
Signal Support AHD, IPC, CVBS, TVI, CVI (5 in 1)
Video Coding H.264
Video Format 4CH / 8CH 1080p
Video Frame PAL: 1 - 25 FPS / NTSC: 1 - 30 FPS
Double Stream Support
Interface USB Port (2x), RS485, SATA HDD (max 8 GB), VGA, HDMI, CVBS,
BNC (4x / 8x), RCA input, RCA output
Recording Mode Automatic / Manual / Scheduled / Motion Detection / Alarm Recording
Recording Resolution Self-adaption
Playback 4CH 1080p
Playback Mode Instant / Search / Event
Backup Mode USB / Network
Protocol Support TCP/IP, UDP, PPPoE, DHCP, DDNS, NTP etc.
P2P Cloud N_EYE Pro APP / www.yunyis.com
Supported access Mobile App (iOS / Android), UTC control, 3G, WIFI
Power 12 VDC
Power Consumption < 15W (no HDD)
Operating conditions -10 - 55 °C / 10 - 90% humidity
Phyiscal 255 x 215 x 45 mm / < 1,5 KG (no HDD)
Sensor
System
Recording
Manage
Network
Power
Others
Figure Figure "A" "B"
Figure "C"
2
English
1. Connect
- Connect the cameras to the recorder with the coaxial cables using BNC connector
- Use the power splitter to power the cameras
- Connect the DVR to a TV or monitor using the preferred connector
- Connect the mouse using USB
- Connect the recorder to the internet using an Ethernet cable (if desired)
- Finally power up the recorder with the included power adapter.
2. Start Up
Press the start button and make sure the TV/monitor is set to the right input source. It will enter the real-time monitoring screen as
shown in gure : "A"
3. Navigation
Right-click anywhere to access the “Right-click menu”.
At rst attempt login is required, default username is admin, default password is 123456
Use the left mouse button to navigate through the menu, right click in the menu to go back.
4. Shutdown
- Right-click anywhere to access the “Right-click menu”, choose “Shut down system” and “Close”, or
- Long press the startup button at the front panel (not recommended as it may damage the hard disk)
5. Recovery
At sudden system power o, the recording video will be stored automatically and after reboot, the recorder will automatically
resume to the status before power o.
6. Recording
In the Record Cong menu you can set each camera’s recording schedule. By selecting the preferred recording mode and clicking
individual timeslots or dragging to set a larger timezone or to cover multiple days at once.
White means that no recording will be done in this timeslot, blue means constant recording is done and green means that
recording will only happen after motion is being detected.
After a schedule is nished, it can easily be copied to one or more cameras. See gure "B"
7. Motion detection
In right-click menu - main menu - system settings - output mode the motion detection can be enabled and dierent settings can
be set:
- 3 dierent sensitivity settings
- exact action(s) to take: Record one or more channels, take snapshot, send Email or show triggered camera fullscreen.
- Area setting (motion mask): if set only motion in the highlighted areas trigger the set action(s).
8. Playback
When watching back earlier recordings, you get the interface like gure :"C"
The 4 grey timelines at the bottom represent the 4 dierent channels. Dierently coloured areas indicate dierent types of
recording (scheduled, manual, alarm or triggered by motion detection).
Drag the timeline left or right to scroll in time, use the mouse’s scroll-wheel to zoom the timeline.
Double click on a specic time to play back the recording starting from the selected time.
9. Mobile Application
To access the DVR on your smartphone make sure the DVR is connected to the router and the network is congured correctly.
Download and open the App “N_EYE PRO”, login or register your account or use local login if you only need access from within
the local network. Add device using the plus sign and select Network Device. Scan the QR-tag shown at the DVR under P2P Cloud
or copy the requested network parameters. The App can automatically detect the number of cameras on this DVR. After saving you
will see all cameras added. On the top-right corner specic cameras can be switched on and o. Other options in the App include
playback and manual recording on smartphone.
3

Specyfikacje produktu

Marka: Konig
Kategoria: Rejestrator głosu
Model: SAS-AHD1004

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig SAS-AHD1004, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Rejestrator głosu Konig

Konig

Konig SAS-AHD1004 Instrukcja

24 Sierpnia 2024
Konig

Konig SEC-DVR404 Instrukcja

17 Sierpnia 2024

Instrukcje Rejestrator głosu

Najnowsze instrukcje dla Rejestrator głosu

Hikvision

Hikvision DS-7716NI-I4(B) Instrukcja

11 Października 2024
Hikvision

Hikvision iDS-6716NXI-I/16S (B) Instrukcja

11 Października 2024
Hikvision

Hikvision DS-7204HQHI-K1/A Instrukcja

10 Października 2024
Zoom

Zoom H1 XLR Instrukcja

9 Października 2024
Toshiba

Toshiba DVS16-480-2T Instrukcja

7 Października 2024
Philips

Philips Voice Tracer VTR8102 Instrukcja

5 Października 2024
Philips

Philips Voice Tracer VTR9000 Instrukcja

5 Października 2024
Philips

Philips Voice Tracer VTR9100 Instrukcja

5 Października 2024
Qian

Qian QDVR081701 Instrukcja

4 Października 2024
Qian

Qian QDVR041701 Instrukcja

4 Października 2024