Instrukcja obsługi Konig KN-RCU20B

Konig Zdalne sterowanie KN-RCU20B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig KN-RCU20B (47 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/47
2013-06-18
KN-RCU20B
MANUAL (p. 2)
Universal Remote Control
ANLEITUNG (S. 5)
Universal-Fernbedienung
MODE D’EMPLOI (p. 8)
Télécommande universelle
GEBRUIKSAANWIJZING (p. 11)
Universele afstandsbediening
MANUALE (p. 14)
Telecomando Universale
MANUAL DE USO (p. 17)
Mando a distancia universal
HASZNÁLATI ÚTMUTATÓ (o. 20.)
Univerzális távirányító
KÄYTTÖOHJE (s. 23)
Yleiskaukosäädin
BRUKSANVISNING (s. 26)
Universal fjärrkontroll
NÁVOD K POUŽITÍ (s. 29)
Univerzální dálkový ovladač
MANUAL DE UTILIZARE (p. 32)
Telecomandă universală
ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 35)
Τηλεχειριστήριο γενικής χρήσης
BRUGERVEJLEDNING (s. 38)
Universal Fjernbetjening
VEILEDNING (s. 41)
Universal fjernkontroll
ИНСТРУКЦИЯ (стр. 44)
Универсальный пульт ДУ
2
ENGLISH
Universal Remote Control
We recommend that you read this manual before installing/using this product.
Keep this manual in a safe place for future reference.
Remote control description: The appearance of your remote control may differ depending
on the model. The difference will be in the 2nd and/or 3rd row. The remote control is
always suitable for your TV, but can also be suitable for multiple devices (2, 4 or
8 devices).
Press Button and Function Table
Press
Button TV function VCR
function
DVD
function SAT function DVB-T
function
1 EXIT Exit Exit Clear Exit Exit
2
Previous
Channel/Next
Channel
PREV/NEXT PREV/NEXT PREV/NEXT
Previous
Channel/Next
Channel
3 12 12 ---- Degree 12 -------
4 Red Fast Rewind Fast Rewind East Fast Rewind
5 Play Play Play Signal Play
6 Blue Fast
Forward
Fast
Forward Help Fast Forward
7 Normal Record Record TV/Radio Record
8 Yellow Pause Pause Pause Pause
9 Green Stop Stop West Stop
10 Text mode Disc Disc Help TEXT
11 Reveal --- A/B --- -------
12 Page Hold --- Title --- -------
13 Expand --- Subtitle --- -------
14 TV mode ANT/SW --- Guide BLUE
15 RCL Rewind Rewind --- Rewind NAVIGATION
Remote Control Settings
Code Range: TV 1000 — 1981
SAT/CBL 3000 — 3773
Select Equipment
Menu button
Nicam
Volume +
Volume −
A
V/TV switch
Indicator
Power button
Favourite channel
Macro function
Select Numeral
Menu functions
Mute
Channel +
Channel −
3
A. How to Enter Codes
1. Switch on the home appliance you wish to control and look up the first set of codes
of the home appliance in the code chart. For example: if you wish to insert the code
a PHILIPS TV set, the first set of code shall be 1492.
2. Press the “TV” button and the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator is switched on. Then release both buttons (the indicator light will switch off
and then on again).
4. Enter the 4-digit code. For example: the first set of codes for a PHILIPS TV set is
1492. Enter 1492.
Note:
I. The code entered is correct. The indicator light will flash twice before switching
off.
II. The code entered is incorrect. The indicator light will flash three times. Please
re-enter the code.
III. To exit the setting function, press the “Select Equipment Button”. For example:
Press the TV button if the previous setting is TV.
5. After entering in the code, the indicator light will switch off.
6. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 6 until
you have found the right code.
NOTE: If you install a satellite receiver, follow the same procedure as mentioned above
under A, but instead of pressing the “TV” button press the “SAT” button and in the code list
search for the right code for the satellite receiver.
B. How to Search for Codes Automatically
1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.
NOTE: If you install a satellite receiver, please follow the same procedure as mentioned
above under B, but instead of pressing the “TV” button you should press the “SAT” button.
Setting Favourite Channel
Use this function to set your favourite channels in “Favourite Channel”.
Setting Method:
1. Press the “TV” button and select the equipment you want to set.
Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator is switched on. Then release both buttons (the indicator light will switch off
and then on again).
Enter code 9993 manually. The indicator light lights up to indicate that the FAV setting
is in start-up mode.
2. Enter the channel number of your favourite channel. Press the “Power” button to enter
one channel number. Then enter the next channel number. Press the “TV” button after
you have entered all the favourite channels. The indicator light switches off. The
setting is completed. (The memory space is full when the indicator light flashes 5 times.
No channel number can be entered anymore).
For example: Under the TV page you wish to enter channels (02), (38) and (56) as
your favourite channels. Enter the code 9993 manually before entering the channel
number one by one.
02 POWER 38 POWER 56 TV
When the indicator light is switched off, the settings are completed.
3. In normal mode, press the “FAV” button with the remote control pointing at the TV set.
You can find your favourite channel in the order of settings. Press the “FAV” button and
your next favourite channel in the setting list will appear.
Clear Favourite Channel
Settin Method:
1. When setting the “FAV” channel, you can press the “FAV” button to clear the wrong
channel entered or re-set the settings. Press the “FAV” button once to clear an
undesired channel (one-button command). When a “Favourite Channel” is cleared, the
indicator light will flash three times.

Specyfikacje produktu

Marka: Konig
Kategoria: Zdalne sterowanie
Model: KN-RCU20B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig KN-RCU20B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Konig

Konig

Konig KN-WLHDMI20 Instrukcja

15 Września 2024
Konig

Konig SAS-ASRC300 Instrukcja

11 Września 2024
Konig

Konig KN-RFRS2 Instrukcja

9 Września 2024
Konig

Konig KN-RCU20B Instrukcja

16 Sierpnia 2024
Konig

Konig SAS-CLALRC10 Instrukcja

9 Sierpnia 2024
Konig

Konig IR-SUPERMASTER Instrukcja

7 Sierpnia 2024
Konig

Konig IR-URC31 Instrukcja

4 Lipca 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024