Instrukcja obsługi Konig IR-URC31

Konig Zdalne sterowanie IR-URC31

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig IR-URC31 (37 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/37

IR-URC31 +

IR-URC32

MANUAL (p. 2)

Universal Remote Control

MODE D’EMPLOI (p. 7)

Télécommande universelle

MANUALE (p. 13)

Telecomando universale

BRUKSANVISNING (s. 25)

Universal fjärrkontroll

MANUAL DE UTILIZARE (p. 30)

Telecomandă universală

HASZNÁLATI ÚTMUTATÓ (o. 19.)

Egyetemes távirányító

KÄYTTÖOHJE (s. 22)

Universaali kaukosäädin

GEBRUIKSAANWIJZING (p. 10)

Universele Afstandsbediening

ANLEITUNG (s. 4)

Universal-Fernbedienung

MANUAL DE USO (p. 16)

Mando a distancia universal

NÁVOD K POUŽITÍ (s. 28)

Univerzální dálkové ovládání

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 33)

Γενικό Τηλεχειριστήριο

ENGLISH

Operation:

The 4-in-1 universal remote control is suitable for all TV sets (TV), DVD players

(DVD), digital and analogue satellite receivers and cable receivers (CBL/SAT),

from common manufacturers. The universal remote control can execute almost

all basic device functions.

Button description

SET - For setting the remote.

TV , SAT , DVD, DVB – Device button

Power – On and Off

0-9 - Number buttons for selecting channels or entering the device code during

setup.

AV/TV - TV/Video button on your TV remote control or the TV/SAT button on

your SAT remote control or A/B in cable and CD mode.

Menu - Menu or OSD (On-Screen Display) or memory.

CH + /- - Channel up and down

VOL +/- - Volume up and down

Mute – Mute the sound

 (fast reverse)REW

► PLAY (operate your DVD, CD etc)

 (fast forward)FFWD

 (Record)REC

 (terminate your operation)STOP

 PAUSE

Red, Green, Yellow Blue and for TV Teletext.

Television video

TV and text mixed

Teletext mode

Page hold

Up, Down, Left, Right, OK, Exit - Functions like the UP, DOWN, LEFT, RIGHT,

OK, EXIT, menu functions.

Setup

Make sure that fresh batteries have been inserted correctly into the remote

control.

To make your remote control ready for use, you need to carry out one of the

following steps:

A. Setup by Brand Code

1. Switch on the device for which you wish to use the remote control.

2. Find the code number of your device brand in the code list from the

respective device group.

3. Press the SET button and the device button at the same time. Release the

two buttons as soon as LED lights up.

4. Enter the 3-digit device code within 10 seconds. If no entry within 10

seconds, the setting up mode is automatically terminated.

5. The LED turns off if the code has been accepted by the remote control. If

theLEDashestwice,thatmeansthecodemaybewrong,andtheremote

control remains in setup mode, enter the correct code from the list again in

good time.

6. Check the function of the buttons on remote control. If it does not function

correctly, try another 3-digit device code (e.g. 010…) from the list under

the same brand. Repeat the step 3 to 6 until all the basic functions operate

correctly.

Note: Exit the setup mode by pressing the device button, or the set-up mode is

automatically terminated if no button is pressed for 10 seconds.

B. Setup by Automatic Search

1. Switch on the device that you like to control. If it is a VCR insert a cassette.

2. Point the remote control at the device. Simultaneously press the SET and

Devicebuttonsforthreeseconds.TheLEDshouldstartashing,thatmeans

it is in Automatic Search now.

3. The OFF signal is automatically transmitted from the remote control to the

device (code scan). As soon as the device switches off, immediately press

any key (except SET key) to stop the Automatic Search.

4. Switch on the device again by pressing the “POWER” key. Check the function

of the other buttons on the remote control. If none of the buttons function

(i.e. the search cannot be stopped at the correct time) or the majority of the

buttons do not function correctly, restart the search (see steps 2 to 4) to

ndasuitablecode.Ifthemajorityofthebuttonsfunctioncorrectly,setup

has been successful. Re-press the device button to save the code and to

terminate the setup mode.

Note: To automatically terminate the search, press any button (except the SET

button). The LED turns off and the search is terminated.

C. Setup by Manual Search

1. Switch on the device that you like to control.

2. Point the remote control at the device. Press and hold down the SET button

and then press the Device button. (For less than 3 seconds, otherwise Auto

search is started) Then release the two buttons.

3. The LED lights up and the remote is in setup mode.

4. Press the Power button (On/Off button) approx. every 1.5 seconds. (If the

device you are searching for is a DVD player, etc., you can also press the

playbutton.)TheLEDlightshouldstartashing,i.e.thedeviceisinManual

Search Mode.

5. As soon as the device you are searching for switches off (or is reactive),

check whether the other buttons on the remote control function correctly

(do not press Power button, or else it will move to next code). If the majority

of the buttons does not function correctly, press the button approx. every

1.5 seconds to initiate the reactive code (manual search is continued, see

steps 4 to 5). If the majority of the buttons on the remote control functions

correctly, save the code by pressing the Device button to terminate the

manual search.

Note: The Manual Search is automatically terminated if no entry occurs during a

30 seconds period.

D. Display Device Code

You can call up the device code which you have set in your new remote control

as follows:

1. Press and hold the SET button, simultaneously press number 1 to display

thehundredsofthe3-gurecode.CounthowoftentheLEDashes.Ifthe

LEDdoesnotash,thenumberisZero.

2. Press and hold the set button, simultaneously press number 2 to display the

tensofthe3-gurecode.

3. Press and hold the set button, simultaneously press number 3 to display the

onesofthe3-gurecode.

Example for Code 108:

1. PressSETand“1”LEDashesonce

2. PressSETand“2”LEDdoesnotash.

3. PressSETand“3”LEDasheseighttimes.

E. Volume Lock

This function is very practical if you wish to use just one device to control the

volume. In this case, you can use the function to set the volume and mute

button to AMP, regardless of which device you are using (even if you are using a

Specyfikacje produktu

Marka:	Konig
Kategoria:	Zdalne sterowanie
Model:	IR-URC31

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig IR-URC31, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zdalne sterowanie Konig

Konig KN-WLHDMI20 Instrukcja

15 Września 2024

Konig SAS-ASRC300 Instrukcja

11 Września 2024

Konig KN-RFRS2 Instrukcja

9 Września 2024

Konig KN-RCU20B Instrukcja

16 Sierpnia 2024

Konig SAS-CLALRC10 Instrukcja

9 Sierpnia 2024

Konig IR-SUPERMASTER Instrukcja

7 Sierpnia 2024

Konig IR-URC31 Instrukcja

4 Lipca 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer RT112 Instrukcja

9 Października 2024

Neewer RT113 Instrukcja

9 Października 2024

Zalman ZM-VE350 Instrukcja

9 Października 2024

Canon BG-R20 Instrukcja

9 Października 2024

Canon BG-R20EP Instrukcja

9 Października 2024

Mosconi DSP6T8 Instrukcja

8 Października 2024

Mosconi RC MINI Instrukcja

8 Października 2024

Ridem CRC UNB Instrukcja

8 Października 2024

Ridem CRC UNW Instrukcja

8 Października 2024

ORNO OR-GB-458 Instrukcja

8 Października 2024