Instrukcja obs艂ugi Kondator 935-PM91W

Kondator Stekkerdoos 935-PM91W

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Kondator 935-PM91W (1 stron) w kategorii Stekkerdoos. Ta instrukcja by艂a pomocna dla 4 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/1
Removable installation
935-PM91W
935-PM91
Revised: 21
Drill
Drill a hole
in the table
Drill
Drill a hole
in the table
Removable
installation
Removable
installation
Permanent
installation
Permanent
installation
OPTIONAL
ATTACH AND INSERT (NON REMOVABLE)
Attach clips by guiding them into the side tracks.
The clips will keep the product in place without
the fastening nut.
Push the Powerdot all the way down the hole.
Lastly, plug the Powerdot in to the wall socket.
NOTE! Removing the product once inserted
can damage the table and /or the product.
HOW TO REMOVE (WITH CLIPS)
To minimize the risk of damaging the table
and/or product, turn the grommet clockwise
until the clips re-position and loosen up.
NOTE! Removing the product once inserted
can damage the table and /or the product.
INSERT (without clips)
Insert Powerdot into the hole
and feed the power plug through
the plastic fastening nut.
TURN CLOCKWISE & PLUG IN
Turn the plastic fastening nut as far
up the thread as possible.
Make sure that it has been thoroughly
tightened.
Lastly, plug the Powerdot in to the
wall socket.
PULL UPWARD
When the clips are loose, pull
the Powerdot upward until fully removed.
Permanent installation
1
x 1
x 2
- 1 USB Charger
(QC2.0 : 5V 2A /
9V 1.2A / 12V 1A)
- 1 Type B socket
/w 1800 mm cable

Specyfikacje produktu

Marka: Kondator
Kategoria: Stekkerdoos
Model: 935-PM91W

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Kondator 935-PM91W, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮