Instrukcja obsługi Kodak Ngenuity 9150DC

Kodak skaner Ngenuity 9150DC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak Ngenuity 9150DC (98 stron) w kategorii skaner. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/98

Safety

User Precautions

• Place the scanner on a sturdy, level work surface capable of supporting 50.8 kg (112 lbs) and leave adequate clearance on

all sides of the scanner.

• When relocating the scanner, it is recommended that two people lift the scanner and use safe lifting techniques.

• Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use

the scanner indoors in a dry location.

• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.

• When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.

• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.

• Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.

• The scanner requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with the

scanner.

• Do not leave the power cord plugged into the AC outlet if the scanner is not used for an extended period of time.

• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.

• Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.

Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.

• Do not disassemble, service or modify the scanner except as explained in the User’s Guide.

• Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.

Remove the power cord from the wall outlet before moving or relocating the scanner.

• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace

dust, dirt and debris to other locations within the scanner, which may cause the scanner to malfunction.

• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.

When accessing the MSDSs from the website, you will be required to provide the catalog number or keyword of the

consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this

guide for supplies and catalog numbers.

Users and their employers need to observe the common sense precautions applicable to the operation of any machinery. These

include, but are not limited to, the following:

• Do not wear loose clothing, unbuttoned sleeves, neckties, etc.

• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.

• Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.

• Remove all other loose objects from the area that could be drawn into the machine.

• Take sufficient breaks to maintain mental alertness.

• Use only the recommended cleaning supplies.

• Do not use canned/compressed air.

Supervisors should review their employee practices and make compliance with these precautions a part of the job description

for operation of the scanner or any mechanical device.

Environmental information

• The Kodak Ngenutiy Scanners are designed to meet worldwide environmental requirements.

• Disposal of this equipment may be regulated due to environmental considerations. For disposal or recycling information,

contact your local authorities or, in the USA, visit: www.kodak.com/go/scannerrecycle.

• The product packaging is recyclable.

• Kodak Ngenutiy Scanners are Energy Star compliant and shipped from the factory with the default time set to 15 minutes.

European Union

This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate

facilities for recovery and recycling. Please contact your local Kodak representative or refer to:

www.kodak.com/go/scannerrecycle for additional information on the collection and recovery programs available

for this product.

Please consult www.kodak.com/go/REACH for information about the presence of substances included on the candidate list

according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

Acoustic emission

Maschinenlärminformationsverordnung – 3, GSGV

Der arbeitsplatzbezogene Emissionswert beträgt <70 dB(A).

[Machine Noise Information Ordinance — 3, GSGV

The operator-position noise emission value is <70 dB(A).]

EMC statements

United States

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequently energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at their own expense.

Japan

This is a Class A product based on the standard of the Voluntary Control Council for interference by information Technology

Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble

occurs, the user may be required to take corrective action.

Taiwan

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Specyfikacje produktu

Marka:	Kodak
Kategoria:	skaner
Model:	Ngenuity 9150DC
Kolor produktu:	Biały
Wbudowany wyświetlacz:	Nie
Częstotliwość wejściowa AC:	50 - 60 Hz
Wysokość produktu:	495 mm
Szerokość produktu:	521 mm
Głębokość produktu:	762 mm
Waga produktu:	50800 g
Port USB:	Tak
Obsługiwane systemy operacyjne Windows:	Tak
Zakres temperatur (eksploatacja):	10 - 38 °C
Zakres wilgotności względnej:	10 - 80 %
Przewody:	AC, USB
Pobór mocy w trybie czuwania:	60 W
Pobór mocy:	175 W
Napięcie:	100-240 V
Typ skanera:	Skaner ADF
Typ zasilacza:	Prąd przemienny
Maksymalny rozmiar papieru ISO (seria A):	A4
Dołączone oprogramowanie:	Kofax VCDemo, Kofax Scan Demo, Kofax VRS Professional
Podwójne skanowanie:	Tak
Optyczna rozdzielczość skanowania:	600 x 600 DPI
Pojemność automatycznego podajnika papieru:	700 ark.
Standardowe interfejsy:	SCSI-3, USB 2.0
Wersja USB:	2.0
Typ przetwornika obrazu:	CCD
Maksymalny format skanowania:	318 x 1016 mm
Skanowanie w kolorze:	Tak
Skanowanie kliszy:	Nie
Prędkość skanowania ADF (cz/b, A4):	120 stron/min
Prędkość skanowania ADF (kolor, A4):	120 stron/min
Prędkość skanowania duplex ADF (kolor, A4):	240 ipm
Maksymalny dzienny cykl pracy:	150000 stron(y)
Sterowniki skanera:	ISIS, TWAIN
MInimalna grubość nośnika:	0.038 mm
Wykrywanie sklejonych stron:	Tak
Obsługiwane nośniki skanowania:	Zwykły, czysty papier
Źródło światła:	Biały LED
List:	Tak
Prędkość skanowania duplex ADF (cz/b, A4):	240 ipm
Czarnobiałe skanowanie:	Skala szarości