Instrukcja obsługi Kodak KD60

Kodak nieskategoryzowany KD60

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak KD60 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

( )

F I L M T I P

SPECIFICATIONS

Type: Compact, auto-focus 35 mm camera

LCD Panel: Display indicators for red-eye reduction, fill-flash/

flash-charging, flash-off, infinity-focus, self-timer, and the

frame number and battery symbol

Lens: 28 mm,

/4.5; 3-element glass lens

Focus System: 4 zone active infrared AF system with focus

lock; optional infinity-focus mode

Viewfinder: Reverse-Galilean with bright line field of view

and AF aiming indicator; panoramic masking in panoramic

mode

Film Speed: DX (ISO) 100–1000 for colour or black-and-

white print film

Focus Range: Daylight: 0.8 m to infinity

Flash Unit: Electronic with ISO 100/21˚, guide number of

8m; flash automatically turns on at low-light levels

Aperture:

/13–

4.5

Shutter: 1/150 to 1.2 sec

Power Source: one 3-volt lithium KODAK K123LA

(or equivalent) Battery

Dimensions: 123.5 x 68.8 x 32.7 mm

Weight: 170 g

LCD PANEL

GETTING TO KNOW YOUR CAMERA

( )

(20)

FILM

DOOR

(19)

TRIPOD

SOCKET

(18)

STRAP

POST

(17)

BATTERY

DOOR

(16)

FILM

WINDOW

(15)

VIEWFINDER

EYEPIECE

(14)

PANORAMIC

SWITCH

(26)

SELF-TIMER

INDICATOR

(28)

INFINITY-FOCUS

INDICATOR

(29)

FILL-FLASH/

FLASH-CHARGING

INDICATOR

(30)

FLASH-OFF

INDICATOR

(32)

RED-EYE-

REDUCTION

INDICATOR

(27)

PICTURE

COUNTER

(31)

BATTERY

SYMBOL

ATTACHING THE

WRIST STRAP

Thread the short loop of the strap under the Strap

Post ; pull the long loop through the short loop and(18)

pull it tight.

LOADING THE BATTERY

This camera uses a 3-volt KODAK K123LAlithium

(or equivalent) Battery that supplies power for all

camera operations.

NOTE: This camera automatically turns off after

approximately 3 minutes to conserve battery

energy.

Battery Tips

• Keep a spare battery with you at all times.

Lithium batteries perform consistently until they

suddenly die.

• Read and follow all warnings and instructions

supplied by the battery manufacturer.

• Keep batteries away from children.

• Do not try to take apart, recharge or short circuit the

battery, or subject it to high temperature or fire.

• Store batteries in their original packaging prior to

use.

Low-Battery Indicator

It’s time to replace the battery when—

• the Battery Symbol appears on the LCD(31)

Panel .(3)

• the battery symbol on the LCD panel “blinks.”

• none of the indicators appear on the LCD panel.

LOADING THE FILM

If in sunlight, turn your back to the sun and load the

film in the shade of your body.

1. (9)Slide the Film-Door Latch down to open the Film

Door .(20)

2. Insert the flat end of the film cartridge over the Film

Spindle . Push the other end of the film(25)

cartridge down into the Film Chamber until it(24)

snaps into place. Do not force it into the film

chamber.

NOTE: If the Picture Counter on the LCD(27)

Panel (3) blinks “0,” the film is not loaded correctly.

Open the film door and reload the film.

TAKING PICTURES

1. Press the On/Off Button (2)

to turn the camera ON.

When you turn the camera

on, the lens cover

automatically opens.

2. Hold the camera steady.

Be careful not to cover

the flash, lens, and

auto-focus windows

with your fingers.

3. Look through the Viewfinder Eyepiece and center(15)

the auto-focus brackets on your subject. For a sharp

picture, Whenstand at least 0.8 m from your subject.

your subject is within 0.8 to 1.2 m from the camera,

position the subject below the top format/panoramic

indicators.

4. Gently press the Shutter

Button (1) completely

down to take the picture.

The film automatically

advances to the next frame.

2. Compose your picture within the Viewfinder

Eyepiece and press the Shutter Button .(15) (1)

3. Slide the panoramic switch down to return to the

normal position.

2. Partially depress and hold the Shutter Button to(1)

lock the focus.

3. While still partially depressing the shutter button,

move the camera until your subject is where you

want it within the Viewfinder Eyepiece .(15)

ON/OFF

MODE

(13)

LIGHT

SENSOR

(12)

SELF-TIMER

LAMP

(10)

AUTO-FOCUS

WINDOWS

(9)

FILM-DOOR

LATCH

(8)

FLASH

(7)

VIEWFINDER

(6)

SELF-TIMER

BUTTON

(5)

REWIND

BUTTON

(4)

MODE-SELECTION

BUTTON

(3)

LCD

PANEL

(2)

ON/OFF

BUTTON

(1)

SHUTTER

BUTTON

F I L M T I P

ON/OFF

MODE

ON/OFF

4. Press the shutter button down to takecompletely

the picture.

VIEWFINDER

AUTO-FOCUS

BRACKETS

FORMAT/

PANORAMIC

INDICATORS

VIEWFINDER

AUTO-FOCUS

BRACKETS

(25)

FILM

SPINDLE

(24)

FILM

CHAMBER

(23)

DX-CODE

SENSORS

(22)

FILM

TAKE-UP

SPOOL

(21)

FILM-LOAD

MARK

ON/OFF

MODE

4. Close the film door. The film automatically

advances to the first frame and the LCD Panel (3)

displays “1.” Do not open the film door after you

start taking pictures or you will ruin the film.

If the end of the film extends past the film-

load mark, gently push the excess back into the

cartridge.

( )

F I L M T I P

3. Pull out the film leader until the tip reaches the Film-

Load Mark . Lay the film between the film-(21) flat

guide rails.

Continued on reverse side

▼

Using the Focus Lock

This camera automatically focuses on whatever is

within the auto-focus brackets of the viewfinder

eyepiece. If you want to take a picture with the subject

positioned outside of the auto-focus brackets, use the

auto-focus lock as follows:

1. Place the auto-focus brackets on the subject you

want focused in the picture.

Printing Panoramic Format Pictures

If you took panoramic pictures on the entire roll of film, ask

the processing-lab clerk to print the film only in the

panoramic format. If there are panoramic and normal

format pictures on the film, ask the clerk to print the film in

both the normal and panoramic formats. (Normal format

prints are 88.9 x 127 mm or 102 x 152 mm, whereas

panoramic format prints are 88.9 x 254 mm.) You may want

to consult the processing lab for development time and

cost, and don’t forget to check the optional panoramic box

on the photofinishing envelope.

This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

KODAK CANADA INC.

Toronto, Ontario M6M 1V3

1-97

Pt. No. Kodak is a trademark. Printed in U.S.A. 8B9637

Taking Panoramic Pictures

(without changing

rolls of film, you can switch between the panoramic

and normal formats)

The panoramic selection allows you to take wide-

angle shots, such as large groups, football and

baseball fields, landscapes, tall buildings, waterfalls,

etc.

Note to Owners of the Quartz Date and Time

Model: Date and time imprinting is not available in the

panoramic format.

1. (14)Slide the Panoramic Switch from normal to the

panoramic position. The Viewfinder changes to(7)

show the selected field of view.

ENGLISH

Congratulations! And thank you for buying a KODAK Camera.

Your new compact, auto-focus 35 mm camera with motorized

film advance and auto-film rewind, makes taking pictures easy.

The camera uses any DX/DXN, 35 mm colour or black-and-

white print film with a speed of ISO 100, 200, 400, or 1000.

For warranty purposes, please keep your sales receipt

as proof of the date of purchase.

Need help with your camera? Call Kodak (Canada only) toll free

from 8:30 a.m. to 5:00 p.m. (eastern time zone) Monday through

Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area, call

(416) 766-8233, ext. 36100.

(11)

LENS COVER/

LENS

KD60/65

CAMERA

TAKING PICTURES

(Continued)

Using the Self-Timer

When you want to include yourself in the picture, use the

self-timer feature.

1. Use the Tripod Socket to attach the camera to a(19)

tripod, or place the camera on another firm support.

2. (2)Press the On/Off Button to turn the camera ON.

3. Press the Self-Timer Button . The Self-Timer(6)

Indicator appears on the LCD Panel and the(26) (3)

Self-Timer Lamp glows red.(12)

4. Compose your picture and press the Shutter

Button .The self-timer lamp “blinks” approximately(1)

10 seconds before the picture is taken. After you take

the picture, the self-timer automatically turns off.

TAKING FLASH PICTURES

In dim light, such as indoors or outdoors in heavy

shade or on dark overcast days, you need flash. Your

camera features automatic flash that fires when you

need it.

1. (2)Press the On/Off Button to turn the camera ON.

2. Keep the subject within the distance range for the

speed of the film in your camera (see table below).

Be careful not to cover the flash, lens, and auto-

focus windows with your fingers.

3. Press the Shutter Button down. If the(1) partway

Flash-Charging Indicator on the LCD Panel (29) (3)

“blinks,” the flash is not fully charged. Wait for the

blinking to stop and the indicator to disappear

before you take the picture.

UNLOADING THE FILM

Within a few seconds after the last picture is taken, the

film automatically starts to rewind. The Picture

Counter on the LCD Panel blinks “0” when the(27) (3)

film is finished rewinding. Wait for the camera motor to

stop before you open the film door and remove the

film. Reload your camera with fresh Kodak film.

CARING FOR YOUR CAMERA

1. Protect the camera from dust, moisture, sudden impact, and

excessive heat.

CAUTION: Do not use solvents or harsh or abrasive cleaners

on the camera body.

2. If the lens appears dirty, breathe on it to form a mist and wipe

the surface gently with a soft, lintless cloth or lens-cleaning

tissue. Do not apply pressure or you will scratch the lens. Never

wipe a dry lens.

CAUTION: Do not use solvents or solutions not designed for

cleaning camera lenses. Do not use chemically treated tissues

intended for cleaning eyeglasses.

3. Remove the battery when you store the camera for a long time.

CAUTION: To prevent possible damage and electrical shock,

do not try to take apart or repair the camera or flash unit by

yourself.

TROUBLESHOOTING

What happened Probable cause Solution

Camera will Power off Press on/off button

not operate

Flash not ready Wait for the flash-

charging indicator on

LCD panel to stop

blinking

Film not loaded See LOADING

THE FILM

There are no more Remove the film

pictures remaining

Battery weak, dead, Replace or reload the

missing, or improperly battery; see LOADING

inserted THE BATTERY

Film does Battery weak, dead, Replace or reload the

not advance missing, or improperly battery; see LOADING

inserted THE BATTERY

Film completely See LOADING

used (LCD panel THE FILM

has steady “0”)

Film not loaded See LOADING

properly THE FILM

Film does Film did not load See LOADING

not rewind properly THE FILM

Battery weak, dead, Replace or reload the

missing, or improperly battery; see LOADING

inserted THE BATTERY

LCD panel Battery weak, dead, Replace or reload the

is blank missing, or improperly battery; see LOADING

inserted THE BATTERY

SETTING THE DATE AND TIME

The date and time feature enables you to record the date in a

choice of four formats: (month/day/year, day/month/year,

year/month/day) or time (day/hour/minute) directly onto the film. It

features a quartz clock and automatic calendar through the year

2019, including leap years. With the camera held horizontally, the

data is recorded onto the lower right portion of the picture; in the

vertical format with the shutter release up, imprinting occurs on

the lower left portion but positioned horizontally on the picture.

Date and Time Imprinting

Press the Mode Button , located on the film door , to select(b) (20)

the desired data type; then take the picture. Following the

exposure, the Print Indicator blinks in the data panel for(a)

approximately two-to-three seconds to confirm imprinting.

NOTE: The imprinted data may be difficult to read if the subject

area over which it is superimposed is bright or non-uniform. If the

data panel is consistently dim, replace the date-back battery (see

Replacing the Date-Back Battery).

NOTE: If you want to stop the self-timer operation before

the picture is taken, repress the self-timer button or turn

the camera off.

Using the Infinity-Focus Mode

To capture sharp, distant scenery, use the infinity-focus

mode.

1. (2)Press the On/Off Button to turn the camera ON.

2. (4)Press the Mode-Selection Button to select infinity

focus. Make sure the Infinity-Focus Indicator (28)

appears on the LCD Panel .(3)

3. (1)Press the Shutter Button to take the picture.

NOTE: The camera automatically returns to the auto-

flash/start position after you take the picture.

Tips for Better Pictures

• Keep your pictures simple. Move close enough to your

subject so it fills the viewfinder but not closer

than 0.8 m.

• Take pictures at the subject’s level. Kneel down to

take pictures of children and pets.

• Hold your camera vertically to capture tall, narrow

subjects, such as waterfall, skyscraper, or single

person.

• Add interest to your picture by framing it with a tree

branch, a window, or even the rails of a fence.

• Keep the sun behind you. This provides best subject

illumination.

3. Press the Shutter Button to take the picture.(1)

4. To cancel the red-eye-reduction feature, turn the

camera off or press the mode-selection button to

return to the auto-flash/start position.

NOTE: When you take flash pictures using this

feature, the camera fires a short flash before the

picture is taken. The subject’s eye pupil closes

partially to reduce the red-eye effect.

Using the Fill Flash and Flash Off

Fill Flash

— Bright light indoors or outdoors from

backlit subjects can create dark shadows (especially

on faces) in high-contrast scenes. Use fill flash to

lighten these shadows.

Flash Off

— When you do not want to use the

flash, especially indoors where flash is prohibited,

such as in theaters and museums, or in dim lighting

situations, use flash off. Use a tripod (tripod

socket ) or place the camera on another firm[19]

support.

1. (2)Press the On/Off Button to turn the camera ON.

2. (4)Press the Mode-Selection Button to select fill

flash or flash off . Make sure the correct(29) (30)

indicator for the selected mode appears on the LCD

Panel .(3)

3. Press the Shutter Button to take the picture.(1)

NOTE: The camera automatically returns to the auto-

flash/start position after you take the picture.

Flash Tips

• Turn on room lights and have the subject face the

lights to minimize red eyes in pictures.

• Stand at an angle to shiny surfaces like windows or

mirrors to avoid flash reflection and bright spots in

your pictures.

• Keep your fingers and other objects away from the

picture-taking lens, flash, and auto-focus windows

to avoid dark or light pictures.

4. completely Press the shutter button down to take

the picture.

Flash-to-Subject Distance

ISO Film Speed Flash-to-Subject Distance

100 0.8 to 3.7 m

200 0.8 to 4.0 m

400 1.0 to 5.6 m

1000 1.6 to 8.9 m

Using the Red-Eye Reduction

Some people’s eyes (and some pets’) can reflect flash

with a red glow. To minimize red eye in flash or fill-

flash pictures, use the red-eye-reduction feature.

1. (2)Press the On/Off Button to turn the camera ON.

2. (4)Press the Mode-Selection Button once to move

to the red-eye-reduction position. Make sure the

Red-Eye-Reduction Indicator appears on the(32)

LCD Panel .(3)

Using the Rewind Button

If you don’t want to take pictures on the entire roll of

film, you can automatically rewind the film by pressing

the Rewind Button .(5)

ON/OFF

( )

MODE

ON/OFF

MODE

ON/OFF

( )

MODE

ON/OFF

( )

MODE

ON/OFF

( )

MODE

FOR OWNERS OF THE QUARTZ

DATE & TIME MODEL

SERVICE INFORMATION

Where to Get Help

If you have any questions about your camera or have difficulty in

using it, reread this manual and check Troubleshooting. If you

have difficulty that isn’t covered in Troubleshooting:

Take the camera, the film you were using, and any sample

prints to your photo dealer OR call Kodak toll free (in Canada)

from 8:30 a.m. to 5:00 p.m. (eastern time zone) Monday through

Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area,

call (416) 766-8233, ext. 36100.

If your camera needs repair, you may send it through your

photo dealer or directly to our Service Centre; see WARRANTY.

Packing Instructions

1. Include a note your camera, giving all details: model,with

date, place of purchase, a description of the problem,

sample negatives and prints, and the dated proof of

purchase. If possible, include a telephone number where

you can be reached between 8:00 a.m. and 5:00 p.m.

2. Place the camera in a plastic bag to keep out dirt and

packing material.

3. Use a sturdy carton that is large enough for you to

surround the camera completely with packing material such

as crumpled newspaper.

4. Securely fasten the carton with tape. Clearly write the

address of the Service Centre and your name and address

on the top and bottom of the carton.

5. WARRANTYShip the carton to the service centre listed in .

It's a good idea to insure the camera for replacement value.

WARRANTY INFORMATION

Full One-Year Warranty

Warranty Time Period

This KODAK Camera is warranted by Kodak to function properly

for one year from the date of purchase.

Warranty Coverage

Upon submission of dated proof of purchase,

Kodak will REPAIR

or REPLACE, at Kodak’s option, this camera if it fails to function

properly during the warranty period.

How to Obtain Service

For service on this camera, return it through a dealer in Kodak

products, or send it directly to Kodak at the address listed below.

Enclose a note with the camera giving details of the problem and

your complete name and address to:

Kodak Canada Inc.

Kodak Equipment Service Centre

3500 Eglinton Avenue West

Toronto, Ontario

CANADA M6M 1V3

Limitations

This warranty does not apply to the batteries used in this

camera.

The warranty does not cover circumstances beyond

Kodak’s control, nor problems caused by failure to follow the

care and operating instructions in the manual.

Requests for Warranty service will not be accepted without

Proof of the Date of Purchase, such as a copy of the original

dated product sales receipt. (Always keep the original for your

records.)

The option of repair or replacement, at Kodak’s discretion, is

Kodak’s only obligation.

Kodak will not be responsible for any

consequential or incidental damages resulting from the sale

or use of this camera, regardless of the cause of such

damages.

Kodak disclaims all other warranties and conditions,

express or implied, including, without limitation, implied

warranties and conditions of merchantible quality and fitness

for a particular purpose and those arising by statute or

otherwise in law or from a course of dealings or usage of

trade.

Supplemental Provisions

Should any provision of this warranty statement not be permitted

by any applicable law, such provision may not apply to you. This

warranty statement gives you specific legal rights and you may

have other rights which vary from province to province.

(f)

(i) (e)

(g)

(f)

(h)

(e)

(g)

Replacing the Date-Back Battery

1. Open the Film Door .(20)

2. Slide the Film-Pressure Plate to the right until the silver(e)

spring clears the Retaining Ears and reveals the Battery(f)

Cover .(g)

3. Remove the screw from the battery cover using a small Phillips

screwdriver.

4. Insert a new 3-volt lithium CR2025 (+ side up) battery. Replace

the battery cover making sure the square Tab is under the(h)

top retaining ear.

5. Reattach the screw and slide the film-pressure plate back,

making sure it engages into the Center Notch and is under(i)

both retaining ears on the film door.

NOTE: After you replace the battery, you will need to reset

the date and time.

Mode Selection

Use the Mode Button to change the data display as shown.(b)

MODE/SELECT/SET

Setting Data

1. Press the Mode Button to select the desired data type.(b)

2. Use the Select Button to move between different parts of(c)

the displayed data. With the data displayed, pressing the select

button in succession causes the settings for year, month, and

then day to blink. On the data panel, the letter “M” indicates the

location for the month and the apostrophe “ ’ ” for the year.

In time mode, pressing the select button successively

causes the hour, minute, and then the colon to blink.

3. Press the Set Button to change the blinking display.(d)

Date back subject to minor appearance and specification

changes.

Specyfikacje produktu

Marka:	Kodak
Kategoria:	nieskategoryzowany
Model:	KD60

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kodak KD60, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Kodak

Kodak Pro Image 100 Color Negative Film Instrukcja

28 Lipca 2024

Kodak Spectrum XF Instrukcja

24 Czerwca 2024

Kodak Advantix T20 Instrukcja

26 Maja 2024

Kodak Automatic 35B Instrukcja

25 Maja 2024

Kodak KD60 Instrukcja

22 Maja 2024

Kodak No. 2 Eureka Instrukcja

20 Maja 2024

Kodak EasyShare CD80 Instrukcja

14 Maja 2024

Kodak Advantix C650 Instrukcja

6 Maja 2024

Kodak Duo Six-20 Instrukcja

5 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024