Instrukcja obsługi Kodak i1405

Kodak skaner i1405

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak i1405 (59 stron) w kategorii skaner. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/59

OVERVIEW 1-1

INSTALLATION 2-1

SCANNING 3-1

DOCUMENT PRINTING 4-1

MAINTENANCE 5-1

TROUBLESHOOTING 6-1

Safety

User Precautions

• Place the scanner on a sturdy, level work surface capable of supporting 5.5 kg (12 lbs).

• Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use

the scanner and power supply indoors in a dry location.

• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.

• Use only the power supply that was provided with the scanner. Using any other power cord may cause electrical shock and/

or damage the product.

• The printer access door must be in place and closed during scanner operation, except when changing the print head location

or replacing the ink cartridge. When the printer access door is removed, do not allow loose clothing, jewelry, hair or other

objects to enter the printer opening.

• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.

• Do not damage, knot, cut or modify the power cord. This may cause electrical shock or fire.

• The scanner requires a dedicated power outlet. Do not use an extension cord or power strip with the scanner.

• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.

• Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.

Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.

• Do not disassemble or modify the scanner or the AC power adapter.

• This product is designed for connection to IT power systems.

• Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.

Remove the power cord from the wall outlet before moving the scanner.

• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace

dust, dirt and debris to another location within the scanner, which may cause the scanner to malfunction.

• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.

When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you

want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this guide for supplies

and catalog numbers.

Users and their employer need to observe the common sense precautions applicable to the operation of any machinery. These

include, but are not limited to, the following:

• Do not wear loose clothing, unbuttoned sleeves, etc.

• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.

• Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.

• Remove all other loose objects from the area that could be drawn into the machine.

• Take sufficient breaks to maintain mental alertness.

• Use only the recommended cleaning supplies.

• Do not use canned/compressed air.

Supervisors should review their practices and make compliance with these precautions a part of the job description for

operation of the scanner or any mechanical device.

Warning labels

CAUTION: Moving parts, avoid contact.

CAUTION: Hot surface, avoid contact.

Specyfikacje produktu

Marka:	Kodak
Kategoria:	skaner
Model:	i1405
Kolor produktu:	Black, White
Częstotliwość wejściowa AC:	50 - 60 Hz
Wysokość produktu:	365 mm
Szerokość produktu:	547 mm
Głębokość produktu:	300 mm
Waga produktu:	10400 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	ENERGY STAR
Port USB:	Tak
Zakres temperatur (eksploatacja):	15 - 35 °C
Zakres wilgotności względnej:	15 - 76 %
Pobór mocy:	60 W
Obsługiwany systemy operacyjne Linux:	Fedora 9, SuSE Linux 11, Ubuntu 8.04
Napięcie:	100-240 V
Głębokość koloru wejścia:	48 bit
Typ skanera:	Skaner z podajnikiem
Typ zasilacza:	Prąd przemienny
Rozmiary seri A ISO (A0…A9):	A4
Maksymalny rozmiar papieru ISO (seria A):	A4
Podwójne skanowanie:	Tak
Optyczna rozdzielczość skanowania:	600 x 600 DPI
Głębokość koloru wyjścia:	24 bit
Obsługiwane systemy operacyjne serwera:	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Standardowe interfejsy:	USB 2.0
Wersja USB:	2.0
Typ przetwornika obrazu:	CCD
Poziomy skali szarości:	256
Maksymalny format skanowania:	297 x 863 mm
Skanowanie w kolorze:	Tak
Skanowanie kliszy:	Nie
Formaty plików (scanner):	JPG, PDF, RTF, TIFF
Maksymalny dzienny cykl pracy:	9000 stron(y)
Sterowniki skanera:	ISIS, TWAIN
Standardowa pojemność podajnika (arkusze):	150 ark.
Wykrywanie sklejonych stron:	Tak
Poziom głośności skanowania:	57 dB