Instrukcja obsługi Kodak 2400 DV Plus
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak 2400 DV Plus (74 stron) w kategorii skaner. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/74
A-61316 April 2010 i
Safety
The following information contains important information related to operator safety and may help prevent equipment problems.
Make sure you observe all of the precautions listed in this manual.
Safety Precautions
• Do not modify this product, as a fire, electrical shock, or breakdown could result.
• Do not attempt to remove the covers and panels, which have been fixed to the product. Some products have a high-voltage
part or a laser beam source inside that could cause an electrical shock or blindness. The operator is only allowed to slide out/
in the projection unit of the scanner.
• Only use the supplied power cord.
• Use only the specified power source voltage.
• Do not use a multiple outlet adapter to connect any other appliances or machines.
• Do not touch the plug of the power cord with a wet hand.
• Connect the plug of the power cord securely into the power outlet.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Should any of these
conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and call your
Kodak Service Representative.
• Do not use an extension cord. Contact your Kodak Service Representative if an extension cord is required.
• Do not place any container that contains water, metal clips or other small metallic objects on this product.
• Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and call your Kodak Service Representative.
• If this product becomes inordinately hot or emits smoke, or unusual odor or noise, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your Kodak Service Representative. A fire or electrical shock
could result if you continue to use the product.
• Connect the plug of the power cord to a wall socket-outlet that is equipped with a grounding terminal.
• If this product has been dropped or the cover is damaged, immediately turn OFF the power switch, unplug the power cord
from the power outlet, and call your Kodak Service Representative.
• Do not use flammable sprays, liquids, or gases near this product.
• Do not let any object plug the ventilation holes of this product.
• Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or heating apparatus.
• Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier.
• Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock
• After installing this product, mount it on a secure base.
• Do not store toner and PC drum units near a floppy disk or watch that are susceptible to magnetism.
• Do not place any objects around the power plug.
• The wall socket-outlet shall be installed near the machine and shall be easily accessible as the power plug may be difficult to
pull out when an emergency occurs.
• Always use this product in a well-ventilated location.
• Whenever moving this product, be sure to disconnect the power cord and other cables.
• When unplugging the power cord, be sure to hold onto the plug.
• Do not store toner or PC drum units and other supplies and consumables in direct sunlight and high temperature and
humidity.
• Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight.
• Do not unpack a toner unit or PC drum unit until the time of use. Do not leave an unpacked unit standing; install it
immediately.
• Do not keep toner and PC drum units in an upright position or upside down.
• Do not throw or drop a toner unit or PC drum unit.
ii A-61316 April 2010
• Do not use this product in an area where ammonia or other gases or chemicals are present.
• Do not use this product in an environment with a temperature outside the range specified in the User’s Guide.
• Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product.
• Do not touch or scratch the surface of the toner unit developing roller and the PC drum.
• Use only the recommended supplies and consumables.
Safety rules
• The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sunlight at all times.
• Keep hands, hair and clothing away from rollers and other moving parts.
• Be sure the scanner is OFF before removing the Projection Lamp Unit.
• Be sure that the proper voltage is used and that the machine is well grounded. The use of electrical extension cords is
strongly discouraged.
• For best performance, use the recommended supplies and consumables with this unit.
• Do not attempt to remove any cover that is secured.
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
• This device may not cause harmful interference, and this device must accept any interference received, including
interference that may cause undesired operation.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The design and production of this unit conforms to FCC regulations, and any changes or modifications must be registered with
the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer
will be subject to penalty under FCC regulations.
Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CE Marking (Declaration of Conformity) (For European Users)
This product complies with the following EU directives:
2006/95/EC and 2004/108/EC directives.
This declaration is valid for the area of the European Union (EU) only.
This device must be used with shielded interface cable and shielded network cable.
The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under rules.
Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level at the operator position according to EN27779 is
equal to or less than 70dB (A).
European Union
This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate
facilities for recovery and recycling. Please contact your local Kodak representative or refer to
www.kodak.com/go/recycle for additional information on the collection and recovery programs available for
this product.
Specyfikacje produktu
| Marka: | Kodak |
| Kategoria: | skaner |
| Model: | 2400 DV Plus |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kodak 2400 DV Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje skaner Kodak
6 Października 2024
1 Października 2024
9 Września 2024
8 Września 2024
5 Września 2024
5 Września 2024
5 Września 2024
30 Sierpnia 2024
29 Sierpnia 2024
28 Sierpnia 2024
Instrukcje skaner
- skaner Braun
- skaner Voltcraft
- skaner SilverCrest
- skaner Epson
- skaner Fujitsu
- skaner Panasonic
- skaner Canon
- skaner Nedis
- skaner Medion
- skaner Lenco
- skaner HP
- skaner Brother
- skaner Honeywell
- skaner Nikon
- skaner Xerox
- skaner Zebra
- skaner Cobra
- skaner Trust
- skaner AgfaPhoto
- skaner Eurolite
- skaner Ricoh
- skaner Renkforce
- skaner Rollei
- skaner Uniden
- skaner Dymo
- skaner Panduit
- skaner Visioneer
- skaner ION
- skaner Maginon
- skaner Antec
- skaner Konica Minolta
- skaner Jay-Tech
- skaner Albrecht
- skaner AVerMedia
- skaner Genius
- skaner Technaxx
- skaner Martin
- skaner Blackmagic Design
- skaner Newland
- skaner Elmo
- skaner Avision
- skaner Lexmark
- skaner Agfa
- skaner Reflecta
- skaner Tevion
- skaner Targus
- skaner Sagem
- skaner Easypix
- skaner Kensington
- skaner GlobalTronics
- skaner Steren
- skaner Konig
- skaner Minolta
- skaner Veho
- skaner Dnt
- skaner Hella
- skaner Ipevo
- skaner Rittz
- skaner Jobo
- skaner Plustek
- skaner Zolid
- skaner Traveler
- skaner Mustek
- skaner Neat
- skaner RadioShack
- skaner ICarsoft
- skaner Kenko
- skaner Kogan
- skaner Yupiteru
- skaner Vupoint Solutions
- skaner DTRONIC
- skaner Ross-Tech
- skaner DENSO
- skaner Perfect Choice
- skaner IRIS
- skaner Soundsation
- skaner CDVI
- skaner Scan Dimension
- skaner Dyka
- skaner Matter And Form
- skaner Pacific Image
- skaner Doxie
- skaner CZUR
- skaner Cartrend
- skaner 3DMAKERPRO
- skaner Ambir
- skaner Microtek
Najnowsze instrukcje dla skaner
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
29 Grudnia 2024
22 Grudnia 2024
14 Grudnia 2024
14 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
6 Grudnia 2024