Instrukcja obsługi Klipsch Sub-12

Klipsch subwoofer Sub-12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klipsch Sub-12 (4 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

SUBWOOFER

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where it exits from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. vicing is required when the apparatus hasREFER all servicing to qualified service personnel. Ser

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions in the

literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present

within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or

moisture. The product must not be exposed to dripping and splashing and no object filled with fluids –

such as a vase of flowers – should be placed on the product.

WARNING: Voltages in this equipment are hazardous to life. There are no user-serviceable parts inside.

Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users

authority to operate this device.

POSITIONING YOUR SYNERGY SERIES SUBWOOFER

Klipsch powered subwoofers are designed to reproduce deep bass and deliver the impact that

makes your movies and music come alive. For optimum performance, place your subwoofer in a

corner of the room on the same wall as your front channel speakers. (refer to Figures 1 and 2).

Please note that room placement can have a dramatic effect upon the performance of your

powered subwoofer. Corner placement, as suggested above, will increase the amount of bass

output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the

amount of bass output.Experiment with a number of different placement options and control

settings to find the one that best suits your particular room and taste. When choosing your

subwoofer’s location, keep in mind that you will need to connect the subwoofer’s built-in amplifier

to an AC power outlet.

CONNECTIONS AND CONTROLS

Optimal Connections – Klipsch Synergy Powered subwoofers can be connected to the subwoofer

output of your electronics via the RCA jack inputs (“LINE IN”) on the subwoofer’s rear panel (refer

to Figure 3).This can be in place of the conventional speaker wire connections (“HIGHLEVEL IN”).

For more information on the controls mentioned in this manual and on bass management, see

your dealer or visit www.klipsch.com.

Conventional Speaker Wire Connections – Using 16-gauge or larger speaker wire, connect the

RED “positive” (+) terminal of your amplifier’s LEFT channel to the RED (+) terminal of your

subwoofer’s LEFT channel input (“HIGH LEVEL IN”). Connect the BLACK “negative” (-) terminal of

your amplifier’s LEFT channel to the BLACK “negative” (-) terminal of your subwoofer’s LEFT

channel input (“HIGH LEVEL IN”). Repeat this procedure for connecting your amplifier’s RIGHT

channel to your subwoofer’s RIGHT channel input (refer to Figure 4). Take care to make sure that

no bare wires from any of the connections touch any other terminals as this could cause a short

and damage your equipment.

“HIGH LEVEL OUT” – This passes the “HIGH LEVEL IN” signal out to your left and right speakers

with frequencies below 100Hz removed.

“LINE IN/LFE” – This input is filtered by the built-in “LOW PASS” (LP) crossover and is designed as

a general purpose input for the subwoofer. It accepts the LFE signal output of your digital

surround electronics.

“LOW PASS” (LP) CROSSOVER – The crossover allows the user to select the upper-frequency

cutoff of the subwoofer. The frequency is selectable from 40-120Hz. Frequencies above the set

level are filtered out,allowing you to blend the subwoofer’s output with that of your main speakers.

“GAIN” – This control serves as an overall volume control for the subwoofer. It is used to match the

output level of the subwoofer to the main speakers.

“PHASE” 0/180 – This control is used to acoustically match the subwoofer’s output to your main

speakers. Select the position, either 0˚ or 180˚, in which your subwoofer has more output at the

listening position.

“POWER” ON/OFF– In the “ON” position, the subwoofer will remain “on” constantly or can turn

“on” and “off” automatically when the “AUTO/ON” circuit is engaged (see “AUTO/ON”). In the

“OFF” position, the subwoofer will remain “off” until the switch is manually turned back to the

“ON” position.

A – UTO/ON When the main “ ” ON/OFF switch is in the “OFF” position, this switch has noPOWER

affect on the subwoofer. When the main “POWER ON/OFF” switch is in the “ON” position, this

switch allows the auto circuit to be engaged. When this switch is in the “AUTO” position, the

subwoofer will automatically turn “on” when it senses a signal. It will automatically turn “off” after

20 minutes with no signal. When this switch is in the “ON” position, the subwoofer will remain “on”

as long as the “POWER” ON/OFF switch is in the “ON” position.

LED indicator– Klipsch Synergy powered subwoofers have an LED on the bottom of the front panel

that indicate the status of the built-in amplifier. The LED will light red when the amplifier is in

standby mode and blue when the amplifier is on and receiving a signal.

CARE AND CLEANING OF YOUR POWERED SUBWOOFER

Your subwoofer has a durable vinyl finish that should only require dry dusting or cleaning with a

dry cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents. The brush

attachment of your vacuum should remove any dust from your subwoofer enclosure.

WARRANTY — U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United States or Canada.

KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and

workmanship (subject to the terms set forth below) for a period of five (5) years from the date of

purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this

product or any defective parts (excluding electronics and amplifiers). For products that have

electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the

date of purchase.

To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you

purchased this product. Proof of purchase in the form of a bill of sale or receipted invoice, which is

evidence that this product is within the Warranty period, must be presented or included to obtain

Warranty service.

This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this

product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call

E N G L I S H

RISK OF ELECTRIC SHOCK

DO NOT OPEN

1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a

KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will automatically terminate prior to

expiration if this product is sold or otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence,

acts of God, accident, commercial use or modification of, or to any part of, the product. This

Warranty does not cover damage due to improper operation, maintenance or installation, or

attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do

KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not

cover product sold AS IS or WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE

REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS

PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN

LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT

LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages

or implied warranties so the above exclusions may not apply to you. This Warranty gives you

specific legal rights, and you may have other rights, which vary from state to state.

WARRANTY OUTSIDE THE UNITED STATES AND CANADA

The Warranty on this product if it is sold to a consumer outside of the United States or Canada

shall comply with applicable law and shall be the sole responsibility of the distributor that

supplied this product. To obtain any applicable warranty service, please contact the dealer from

which you purchased this product, or the distributor that supplied this product.

Sub

Angle Inward

*Less distance will increase bass,

but worsen sound quality.

+ Optional

Sub

+ Optional

Sub

6'-15'

L R

+ Optional

Sub

+ Optional

Sub

X=Y=Z

Alternate

rear placement

A A

FIGURE 2

STEREO PLACEMENT SURROUND LCR AND REARS

FIGURE 1

Specyfikacje produktu

Marka:	Klipsch
Kategoria:	subwoofer
Model:	Sub-12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klipsch Sub-12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje subwoofer Klipsch

Klipsch Reference Premiere RP-1200SW Instrukcja

4 Października 2024

Klipsch PRO-1000SW Instrukcja

3 Października 2024

Klipsch R-120SWi Instrukcja

26 Września 2024

Klipsch KSW-300 Instrukcja

21 Września 2024

Klipsch SW-310 Instrukcja

18 Września 2024

Klipsch RSW SUB Instrukcja

16 Września 2024

Klipsch LF-10 Instrukcja

14 Września 2024

Klipsch Reference Sub Instrukcja

5 Września 2024

Klipsch SPL-150 Instrukcja

29 Sierpnia 2024

Klipsch KSW-100 Instrukcja

20 Sierpnia 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio SGR-10TW3 Instrukcja

13 Października 2024

Teufel T6 Instrukcja

13 Października 2024

Polk DB1040 Instrukcja

10 Października 2024

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024

OSD Audio NERO WSA Instrukcja

9 Października 2024

Kicker 51CWQ102 Instrukcja

9 Października 2024

Kicker 51CWQ122 Instrukcja

9 Października 2024

Kicker 43C84 Instrukcja

9 Października 2024

Kicker 51CWQ124 Instrukcja

9 Października 2024

OSD Audio FS12 Instrukcja

9 Października 2024