Instrukcja obsługi Klip Xtreme KHS-633RD Athletik

Klip Xtreme Słuchawki KHS-633RD Athletik

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klip Xtreme KHS-633RD Athletik (21 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
Athletik
Thank you for purchasing the Sport
Headset with wireless technology. We
encourage you to read this quick installation
guide thoroughly to get the most of this
innovative wireless audio accessory.
Wireless Technology
Provides 4 hours of playback time
Sweat-proof design
Secure-fit earbuds allow you to move freely
and work out with confidence
In-line control capsule for power, music and
phone call management
Magnetic earbuds click together to easily
carry them around your neck when not in use
Ultra-light design, just 0.5oz
Micro-USB charging port
•
•
•
•
•
•
•
•
Wireless headset
USB charging cable
Three ear hooks and three ear caps
Quick installation guide
•
•
•
•
I. Introduction
II. Product components
1. Left magnetic earbud
2. Right magnetic earbud
3. Micro-USB charging port
4. Volume + / Next track
5. Power/Multifunction button
6. Volume - / Previous track
7. Status indicator light
8. Built-in microphone
English
Before installing this product, please
make sure your device has the built-in
Bluetooth® feature available. If your device is
not Bluetooth®
-enabled, you must purchase a
Bluetooth receiver.
Plug the supplied USB cable into the USB
port of your computer or to a 5V USB
adapter to charge the battery.
Connect the micro-USB end of the cable into
the charging port of the headset.
Make sure that your headset is fully charged
before using it for the first time.
The headset battery has to be initially charged
for at least for 3 hours. Thereafter, the battery
will take around 2 hours to recharge.
While the headset is being charged, the LED
glows red. The status light turns solid blue
once it has reached full capacity.
The red LED blinks slowly when the battery is
low and needs to be recharged.
•
•
•
•
•
•
Press and hold the power button for 4
seconds to turn on the earphones on. The
blue LED indicator will glow twice and an
audible tone will be heard.
To power off the device, press and hold the
power button again for 4 seconds. The red
III- Basic operation
IV-Advanced operation
1.
2.
Place both devices not more than one
meter away from each other.
Set your Bluetooth®
phone to “discover” the
wireless headset.
Press and hold the power button for
several seconds to turn the headset on and
to put it into the pairing mode.
An audible tone will be heard, accompanied
by alternating blue and red LEDs, to indicate
that the headset has entered into the pairing
mode.
On your mobile phone, tap the newly
discovered audio device ( )
displayed in the Bluetooth®
list.
When the phone asks if you want to pair
1.
2.
3.
4.
5.
6.
LED indicator will glow twice and another
audible tone will be heard.

Specyfikacje produktu

Marka: Klip Xtreme
Kategoria: Słuchawki
Model: KHS-633RD Athletik

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klip Xtreme KHS-633RD Athletik, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Słuchawki Klip Xtreme

Klip Xtreme

Klip Xtreme KHS-633RD Athletik Instrukcja

1 Lipca 2024

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

Klipsch

Klipsch R6i Instrukcja

15 Października 2024
Vakoss

Vakoss MH954 Instrukcja

14 Października 2024
Skullcandy

Skullcandy Cassette Instrukcja

14 Października 2024
Jabra

Jabra Wave Corded Instrukcja

14 Października 2024
Manta

Manta MM65 Instrukcja

14 Października 2024
AKG

AKG Y600NC Instrukcja

14 Października 2024
Audio-Technica

Audio-Technica ATH-ANC29 Instrukcja

13 Października 2024
Daewoo

Daewoo AVS1421 Instrukcja

13 Października 2024
Vakoss

Vakoss MH942 Instrukcja

13 Października 2024
SuperTooth

SuperTooth Freedom Instrukcja

13 Października 2024