Instrukcja obsługi Klein Tools VDV Scout Pro 3

Klein Tools Sprzęt pomiarowy VDV Scout Pro 3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klein Tools VDV Scout Pro 3 (42 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/42
VDV501-852
VDV501-853
VDV ScoutTM Pro 3
INSTRUCTION MANUAL
• VOICE, DATA AND VIDEO CABLE TESTING
• DETECTS SHORT FAULTS, OPEN FAULTS,
REVERSALS, MISWIRES, CROSSOVER WIRING
AND SPLIT PAIRS
• PoEPOWER OVER ETHERNET ( )
• CABLE ID
• LENGTH MEASUREMENT
• TONE GENERATOR
• EXTRA-LARGE BACKLIT LCD
• HUB BLINK
• AUTO POWER-OFF
ENGLISH pg. 2
GEBRAUCHSANLEITUNG
• PRÜFUNG VON KABELN FÜR SPRACH-, DATEN- UND
VIDEOÜBERTRAGUNG
• ERKENNT KURZSCHLÜSSE, UNTERBRECHUNGEN,
VERPOLUNG, VERDRAHTUNGSFEHLER UND SPLIT PA
• PoEPOWER OVER ETHERNET ( )
• KABEL-ID
• LÄNGENMESSUNG
• TONGENERATOR
• EXTRA GROSSES BELEUCHTETES LCD-DISPLAY
• HUB-BLINK-FUNKTION
• AUTOMATISCHE ABSCHALTUNG
DEUTSCH pg. 12
MODE D’EMPLOI
• TEST DE CÂBLES TÉLÉPHONIQUES, DE DONNÉES ET VIDÉO
• DÉTECTE LES COURT-CIRCUITS, LES CIRCUITS OUVERTS,
LES INVERSIONS, LES ERREURS DE CÂBLAGE, LES CÂBLES
CROISÉS ET LES PAIRES DIVISÉES
• PoEPOWER OVER ETHERNET ( )
• IDENTIFICATION DE CÂBLE
• MESURE DE LONGUEUR
• GÉNÉRATEUR DE TONALITÉ
• TRÈS GRAND ÉCRAN LCD RÉTROÉCLAIRÉ
• CLIGNOTEMENT DE CONCENTRATEUR (HUB BLINK)
• MISE HORS TENSION AUTOMATIQUEV
FRANÇAIS pg. 22
MANUAL DE INSTRUCCIONES
• COMPROBACIÓN DE CABLES DE VOZ, DATOS Y VÍDEO
• DETECTA CORTOS, ABERTURAS, INVERSIONES, CONEXIONES
INCORRECTAS, CABLEADOS CRUZADOS Y PARES DIVIDIDOS
• ALIMENTACIÓN A TRAVÉS DE ETHERNET (Power over Ethernet, PoE)
• IDENTIFICACIÓN DE CABLES
• MEDICIÓN DE LONGITUD
• GENERADOR DE TONOS
• PANTALLA LCD RETROILUMINADA EXTRAGRANDE
• PARPADEO EN EL HUB
• APAGADO AUTOMÁTICO
ESPAÑOL pg. 32
1 2 34567 8
ID
Pas Res X-over v
Fail Short Split Open
Shielded
PoE
ft
m
+
B
A
2
ENGLISH
GENERAL SPECIFICATIONS
The Klein Tools VDV Scout
TM Pro 3 is a portable voice-data-video cable tester. It tests and
troubleshoots RJ11, RJ12, RJ45 and F-connector terminated cables, and provides tone generation
for cable tracing. The VDV ScoutTM Pro 3 also measures cable length, tests for shield, performs hub
blink testing and traces up to 19 locations (up to 5 locations with the included remotes, additional
remotes are available separately).
PORTS AND REMOTES OVERVIEW
• Dimensions: 6.5" x 3.0" x 1.6" (16.5 x 7.6 x 4.1 cm)
• Weight: 11 oz. (312 g) with battery and remote
• Operating Temperature: 32° to 122 °F (0° to 50 °C)
• Storage Temperature: -4° to 140 °F (-20° to 60 °C)
• Humidity: 10% to 90%, non-condensing
• Maximum Voltage (between any two connector
pins without damage):
- RJ Jack: 66V DC or 55V AC
- F-Connector: 66V DC or 55V AC
• Battery Life (9V alkaline):
- Standby: 4 years
- Active: 50 hours (without backlight)
• Cable Types: Shielded or unshielded; Cat7a, Cat7,
Cat6a, Cat6, Cat5e, Cat3, Coaxial
• Length Measurement Method: Capacitance
• Length Measurement Range:
1.5' to 1999' (0.5 m to 610 m) with 15 pF/ft
• Length Accuracy:
(5% ft) or (5% m)
• Length Constant Range:
10 pF/ft to 40 pF/ft (33 pF/m to 132 pF/m)
WARNINGS
To ensure the safe operation and service of the tester, please follow these instructions. Failure to
observe these warnings can result in severe injury or death.
• The PoE jack, located on the right side of the Scout
TM
Pro 3 is the only jack designed for PoE energised
cables. Connecting AC energised cables to any port may damage it and pose a safety hazard to the user.
• Improperly terminated RJ plugs have the potential to damage the jacks on the VDV Scout
TM
Pro 3. Visually
inspect an RJ plug before inserting it into the tester. The contacts should always be recessed into the plastic
housing of the plug. Plugging 6-position plugs into the 8-position jack on the tester has the potential to
damage the outer-most contacts of the jack, unless the plug is specifically designed for that purpose.
SYMBOLS ON THE TESTER
Warning or Caution Do use on energised circuits.NOT
Always wear approved eye protection. Read the instructions
Conformité Européenne. Conforms with European Economic Area directives.
This symbol indicates that the equipment and its accessories shall be subject to separate
collection and correct disposal.
RJ45 Port: Data cable, Ethernet cable, Cat5e, Cat6, Cat6a, Cat7, Cat7a.
F-Connector Port: Video cable, coaxial cable, RG6/RG6Q cable, RG59 cable.
RJ11/12 Port: Voice cable, POTS (plain old televoice service) cable, 4-wire cable, 6-wire cable,
2 twisted-pair cables, 3 twisted-pair cables, Cat3.
VDV SCOUTTM PRO 3 TESTER LOCATION ID REMOTES
F-connector port
RJ11/12 port*RJ45 port*
PoE port*
Use for cable location identification mapping.
Set Nos. 1–5 included with VDV500-851,
setNos. 1–18 included with VDV501-852 and
sold separately.
LanMap™
Location ID Remote**
VDV526-055
RJ45
connector
**Cannot be used to perform wire map or
cable length tests.
*The RJ jacks share internal connections, so only one RJ cable can be connected at a time for accurate cable
test results. However, an RJ cable and a coax cable may be connected at the same time. In ID mode, all
connectors on the VDV ScoutTM Pro 3 may be connected at the same time.
CONNECTORS
Barrel Connector
VDV814-609
Female-to-female F-connector
Use with F-connector port
CoaxMap™
Location ID Remote**
VDV512-056
F-connector
3
ENGLISH
SELF-STORING TEST + MAP™ ID REMOTE (VDV501-210)
TEST + MAP™ ID REMOTES (VDV501-2## SERIES)
Use for cable location identification mapping and/or continuity testing. Self-storing remotes display
on tester as Remote ID No. 1. Included with all VDV Scout
TM
Pro 3 models.
Use for cable location identification
mapping and continuity testing.
Remotes display on tester asRemote ID
Nos. 1-12. Set Nos. 2–6 included with
VDV500-853 and sold separately, set
Nos. 7–12 sold separately, individual
remote Nos. 1–12 each sold separately.
RJ11/12
port RJ45
port
F-connector
port
KEYPAD FUNCTION
• VOICE / UP BUTTON
A
: Performs wiremap test on RJ11/RJ12
terminated cable, toggles selection upward in other modes.
• VIDEO BUTTON
B
: Performs continuity test on F-terminated coax cable.
• DATA / DOWN BUTTON
C
: Performs wiremap test on RJ45
terminated cable, toggles selection downward in other modes.
• TONE / HUB BLINK BUTTON
D
: Cycles through available
tone cadences, initiates Hub Blink.
• SETTINGS BUTTON
E
: Selects feet or metres,
enters Length Constant Edit mode.
• PoELENGTH / BUTTON
F
: Measures cable length, initiates PoE test.
• POWER / BACKLIGHT BUTTON
G
: Turns unit on or off, turns backlight on or off.
A
D
G
F
E
B C
• VOICE / UP BUTTON
A
: Short Press: Initiates wiremap test on RJ11/RJ12 terminated cable. When in Tone or
Length Test mode, the first short press selects Voice mode, while repeated short presses selects wires orpairs of
wires. Turns Loop mode on or off. When in Tone or Length Test mode, returns to the home screen. Long press:
When in Settings mode, changes UOM from feet to metres, or increases the length contant value.
• VIDEO BUTTON
B
: Short Press: Initiates continuity test on an F-terminated coax cable.
When in Tone or Length
Test mode, a short press selects Video mode.
Long Press:
Turns Loop mode on or off. When in Tone or Length
Test mode, returns to the home screen.
• DATA / DOWN BUTTON
C
:
Short Press: Initiates wiremap test on RJ45 terminated cable. When in Tone or Length Test mode, first short press
selects Data mode, while repeated short presses select wires or pairs of wires. Turns Loop mode on or Long Press:
off. When in Tone or Length Test mode, returns to the home screen. When in Settings mode, changes UOM from
feet to metres, or increases the length contant value.
• TONE / HUB BLINK BUTTON
D
: Short Press: Repeated short presses will toggle through the available tone
cadences. Initiates Hub Blink. Long Press:
NOTE: DO NOT attempt to use Hub Blink function when connected to a
Power over Ethernet (PoE) active port.
• SETTINGS BUTTON
E
: Short Press: Enters Length Constant edit mode (use the UP
A
and DOWN
C
buttons
to adjust the value). Default for Length Constant mode is the wire pair of Pins 1 and 2 of data/RJ45 cable, and
the wire pair of Pins 3 and 4 of voice/phone cable. See the LENGTH CONSTANT Second section for more details.
Short Press: Displays option of feet or metres (use the UP
A
and DOWN
C
buttons to change). See the
LENGTH MEASUREMENT Long Press: section for details. Exits Settings mode and returns to the home screen.
• LENGTH / PoE BUTTON
F
: Short Press: Initiates cable length test. Test will default to a cable connected to the
RJ45 port. By default, the test will initiate on the first wire with no faults found. See the LENGTH MEASUREMENT
and LENGTH CONSTANT sections for more details.
Long Press: Initiates PoE test.
• POWER / BACKLIGHT BUTTON
G
: Short Press: First short press turns the unit on, repeated short presses will
turn thebacklight on and off. Press the power button a second time to turn the LCD backlight on or off.
Long Press: Turns unit off.
NOTE: Unit will automatically power off after 5 minutes of inactivity, or after
60minutes when in Tone mode.
IN DETAIL
QUICK REFERENCE
RJ45
port F-connector
port

Specyfikacje produktu

Marka: Klein Tools
Kategoria: Sprzęt pomiarowy
Model: VDV Scout Pro 3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klein Tools VDV Scout Pro 3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Klein Tools

Klein Tools

Klein Tools VDV501-770 Instrukcja

9 Października 2024
Klein Tools

Klein Tools ET18 Instrukcja

9 Października 2024
Klein Tools

Klein Tools VDV211-048 Instrukcja

9 Października 2024
Klein Tools

Klein Tools ET500 Instrukcja

6 Października 2024
Klein Tools

Klein Tools NCVT-2 Instrukcja

6 Października 2024
Klein Tools

Klein Tools 45001 Instrukcja

5 Października 2024
Klein Tools

Klein Tools HVNCVT-1 Instrukcja

5 Października 2024
Klein Tools

Klein Tools TI220 Instrukcja

4 Października 2024
Klein Tools

Klein Tools TI222 Instrukcja

4 Października 2024
Klein Tools

Klein Tools TI290 Instrukcja

4 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024