Instrukcja obsługi Klein Tools IR10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klein Tools IR10 (32 stron) w kategorii Thermometer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
IR10
FRANÇAIS p. 21
ESPAÑOL pg. 11
DUAL-LASER
TARGETING
20:1 DISTANCE-
TO-SPOT RATIO
ADJUSTABLE
EMISSIVITY
K-TYPE PROBE
MEASUREMENTS
AUTO-SCAN
MAX/MIN/AVG/DIFF
HIGH/LOW AUDIBLE &
VISUAL ALARMS
BACKLIT DISPLAY
AUTO POWER-OFF
ENGLISH
-40° 120 F
(-40° 65 C)
INSTRUCTION MANUAL
Dual-laser Infrared
Thermometer
3
m IP54
2
GENERAL SPECIFICATIONS
Klein Tools IR10 is a professional dual-laser targeting infrared (IR)
thermometer. It offers a wide measurement range, a tight distance-
to-spot ratio, dual targeting lasers, and several calculation modes to
facilitate different temperature measurement applications. In addition
to measuring temperature using IR emission it can also measure
temperature using a standard K-type probe.
Operating Altitude: 6562 ft. (2000 m)
Relative Humidity: <85% non-condensing
Operating Temp: ° ° ° °32 to 122 F (0 to 50 C)
Storage Temp: ° ° ° °-4 to 140 F (-20 to 60 C)
Measurement Range: -40°F to 1200°F (-40°C to 650°C)
Units: Settable to °F or °C
Emissivity: 0.10-1.00 adjustable
Optical Resolution (Distance-to-spot): 20:1
Dimensions: 7" x 4.49" x 2.05" (178 x 114 x 52 mm)
Weight: 9.1 oz. (256 g) including battery
Battery Type: 1 x 9V battery
Battery Life: (Estimates assume 9V alkaline battery)
8 hours continuous infrared measurement
w/laser and backlight on
Display: Backlit LCD
Display Resolution: 0.1°F (0.1° C)
Calibration: Accurate for one year
K-Type Probe: Included probe suitable for -40°F to 356°F
(-40°C to 180°C)
Lasers: FDA and IEC Class II, <1mW each laser, 630-670nm
Standards:
Conforms to IEC EN 61326-1:2013,EN608251:2014
Complies with: 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50, dated June 24, 2007
Pollution Degree: 2
Ingress Protection: IP54 dust & water resistant
Drop Protection: 9.8 ft. (3m)
Electromagnetic Environment: IEC EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
ENGLISH
3
MEASUREMENT SPECIFICATIONS
Specication IR Measurement K-Type Measurement
Range -40°F to 1200°F
(-40°C to 650°C)
-40°F to 1200°F
(-40°C to 650°C)
Accuracy
≥32°F (0°C): ±3°F1.5°C)
or ± 1.5% whichever is
greater
<32°F (0°C):
±(3.6°F + 0.2°F per degree)
(2°C + 0.2°C per degree))
≥32°F (0°C): ±2°F (±1°C)
or ±1%, whichever is
greater
<32°F (0°C): ±3°F 1.5°C)
or ±1%, whichever is
greater
Repeatability ±0.8% or ±2F(±1C),
whichever is greater
±0.5% or ±1F (±0.5C),
whichever is greater
Spectral
Response 8-14µm N/A
Response
Time <150ms <150ms
Data Hold Yes Yes
MAX/MIN/
Average/
Differential
Yes Yes
Measurement
out of range ‘----‘ on display ‘----‘ on display
Temperature
Correction
Coefcient
Temperature Correction Coefficient: ±0.2°F per °F
0.1°C per °C), or ±0.2% of reading (whichever
is greater) when ambient temperature is above or
below 70 – 77°F (21 – 25°C).
Specifications subject to change.
NOTE: The included K-type probe is suitable ONLY for
temperatures of -40°F to 356°F (-40°C to 180°C). For
temperatures above 356°F (180°C), a high-temp K-Type
probe is required.

Specyfikacje produktu

Marka: Klein Tools
Kategoria: Thermometer
Model: IR10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klein Tools IR10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Thermometer Klein Tools

Klein Tools

Klein Tools IR07 Instrukcja

28 Września 2024
Klein Tools

Klein Tools IR10 Instrukcja

28 Września 2024

Instrukcje Thermometer

Najnowsze instrukcje dla Thermometer