Instrukcja obsługi Klein Tools ET300
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klein Tools ET300 (6 stron) w kategorii Wyłącznik automatyczny. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-800-553-4676
www.kleintools.com 139578 Rev. 09/19 D
WARRANTY
www.kleintools.com/warranty
CLEANING
Be sure unit is turned off and wipe with a clean, dry lint-free cloth.
Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov www.erecycle.org or
for additional information.
INSTRUCTION MANUAL
ENGLISH
Digital Circuit Breaker Finder
• FULLY AUTOMATIC
• FLASHING ARROW
INDICATOR FOR
EASY IDENTIFICATION
• 90 – 120V AC
OPERATION
• MICROPROCESSOR
CONTROLLED FOR
MORE ACCURATE
READINGS
ET300
OPERATING INSTRUCTIONS
1. Identify the wall outlet or fixture for which the breaker must
be determined.
2. Safely check that the outlet or fixture is live.
3. Plug in the transmitter. Its LED will light if it is receiving power.
4. Move to the breaker panel with the receiver.
5. Turn on the receiver by pressing, but not holding, the power button.
You will hear a beep and see its LED lit.
6. Position the receiver perpendicularly on the breakers in the panel
with the power button pointing up.
7. Slowly scan all breakers in the panel once. Ignore any beeps
or indications, as the receiver is learning the panel.
8. Scan all breakers a second time. This time, the receiver will beep
and illuminate the green arrow only at the correct breaker.
9. Power off the receiver by pressing and holding the power button.
Return to the outlet or fixture and remove the transmitter.
NOTE: All appliances or equipment on the circuit being tested should be
unplugged to help reduce the possibility of erroneous readings.
OPTIONAL ACCESSORIES
(Cat. No. 69411)
GENERAL SPECIFICATIONS
• 90 – 120V ACOperating Voltage:
• 50 – 60HzOperating Frequency:
• Tracking Distance: Up to 1000 ft. (305 m)
• Operating Temperature: 32°F – 104°F (0°C – 40°C)
• 50%Relative Humidity:
• < 6562 ft. (2000 m)Altitude:
• For indoor use onlyEnvironment:
• 9 volt alkaline batteryPower:
• Approximately 4 minutesAuto Power Off:
• Transmitter Dimensions: 2.8" x 1.9" x 1.2" (7.11 x 4.83 x 3.04 cm)
• 6.0" x 2.0" x 0.9" (15.24 x 5.08 x 2.29 cm)Receiver Dimensions:
• Transmitter Weight: 1.6 oz. (45 g)
• 3.2 oz. (91 g)Receiver Weight:
• Indication at 0.16" (4 mm) distance from a wire Sensitivity:
carrying 120V AC.
• UL listedSafety Rating:
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Understand the risks of working around live voltage.
• Turn off power before inspecting, applying, or removing
the transmitter (when using the optional 'Leads Adapter').
• Exercise extreme caution around live, bare wires, especially
in an open breaker panel.
• Consult with an experienced electrician when necessary.
• Other equipment or devices attached to the circuit being tested could
interfere with the tester. Clear the circuit before testing.
A
Light Fixture Adapter:
Screw this adapter into an empty light socket.
Make sure the fixture is live. Plug in the
transmitter and follow the instructions
starting at step 4.
B
Leads Adapter:
Carefully attach leads to the correct wires.
Plug in transmitter to adapter. Follow the
instructions starting at step 4.
Exercise extreme caution around live wires.
Digital Circuit Breaker
Finder
ET300
UP
Micro-Processor
Controlled
7
When you press
down on the
Power Button
LED will light up
Digital Circuit Breaker
Finder
ET300
ssor
UP
5
Digital Circuit Breaker
Finder
ET300
TRANSMITTER
Once plugged in, the LED
will light up when
socket is live
3
Digita l Cir cuit Brea ker
Finder
ET300
TRANSMITTER
A
B
ENGLISH
SERVICIO AL CLIENTE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
139579 Rev. 09/19 D
1-800-553-4676
www.kleintools.com
GARANTÍA
www.kleintools.com/warranty
LIMPIEZA
Asegúrese de que la unidad esté apagada y límpiela con un
paño limpio y seco que no deje pelusas.
No utilice solventes ni
limpiadores abrasivos.
ALMACENAMIENTO
Retire las pilas cuando el instrumento no se vaya a usar durante un período
prolongado. No lo exponga a altas temperaturas o humedad. Después de un
período de almacenamiento en condiciones extremas que excedan los límites
mencionados en la sección Especificaciones, deje que el instrumento regrese a
las condiciones de funcionamiento normales antes de utilizarlo.
ELIMINACIÓN / RECICLAJE
No arroje el equipo ni sus accesorios a la basura. Los
elementos se deben desechar correctamente de acuerdo
con las regulaciones locales. Visite www.epa.gov o
www.erecycle.org para obtener más información.
MANUAL DE INSTRUCCIONES
ESPAÑOL
Detector digital
de cortacircuitos
• TOTALMENTE
AUTOMÁTICO
• INDICADOR DE
FLECHA LUMINOSA
INTERMITENTE PARA
FÁCIL IDENTIFICACIÓN
• FUNCIONAMIENTO EN
90V A 120V CA
• EL MICROPROCESADOR
CONTROLADO PERMITE
REALIZAR LECTURAS
MÁS PRECISAS
ET300
Specyfikacje produktu
| Marka: | Klein Tools |
| Kategoria: | Wyłącznik automatyczny |
| Model: | ET300 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Klein Tools ET300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wyłącznik automatyczny Klein Tools
28 Września 2024
Instrukcje Wyłącznik automatyczny
- Wyłącznik automatyczny ATen
- Wyłącznik automatyczny Uni-T
- Wyłącznik automatyczny Vimar
- Wyłącznik automatyczny Hager
- Wyłącznik automatyczny Sirius
Najnowsze instrukcje dla Wyłącznik automatyczny
2 Października 2024
29 Września 2024
21 Września 2024
18 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
14 Września 2024