Instrukcja obsługi Kitchen Brains Modularm 75LC

Kitchen Brains nieskategoryzowany Modularm 75LC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kitchen Brains Modularm 75LC (12 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

24/7 Toll-Free Technical Support

1-800-243-9271

(from the U.S., Canada and the Caribbean)

Save the instructions

for future reference.

www.KitchenBrains.com

INSTALLATION &

OPERATING GUIDE

MODULARM 75LC Multi-Monitor

This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.

Page 2 of 12

MODULARM 75LC Multi-Monitor Installation & Operating

NOTICES

Before you start, please read these instructions

thoroughly in order to obtain maximum benefit from

the capabilities that this product offers.

Thank you for purchasing the 75LC multi-monitor. The 75LC

integrates sophisticated function with easy operation.

Patented Autoset* Technology, combined with common

pre-programmed default settings eliminates the need for

manual programming in most applications. PAS-PRO™

password programming allows for easy and secure custom

configuration. All product functions and accessories may be

used simultaneously or you may use only those required for

your application. A simple, 3 button user interface combined

with prioritized intuitive visual alarm display makes the 75LC

extremely user friendly.

OVERVIEW

75LC FUNCTIONS:

The 75LC offers the following functions: (Patented

Operation, other Patents Pending.)

1. HI & LO Temperature Alarm with Patented Autoset

Technology.

2. AC Failure Alarm with built-in rechargeable battery

and built in recharging circuitry.

3. Door Ajar Alarm. (Requires magnetic contacts. See

pg. 3)

4. Panic (Entrapment) Alarm (Requires optional IP-1

Illuminated Button See pg. 3)

5. Manual and patented timed light control.

6. HACCP monitoring. (additional equipment required)

7. Remote notification. (additional equipment required)

8. Built in audible alarm.

*What is Autoset?

Patented Autoset Technology selects the right alarm temp

setpoints for monitoring a cooler or a freezer automatically,

virtually eliminating the need for manual programming.

Common cooler and freezer setpoints are pre-loaded into

the 75LC. Autoset Setpoints are:

COOLER FREEZER

HI 42F (6C) HI 10F (-12C)

LO LO 30F (-1C) -20F (-29C)

Cooler setpoints are the default settings, used for cooler

monitoring. If the compartment is a freezer, Autoset

detects the lower compartment temperature and

automatically changes to the freezer setpoints. (Freezer

defaults won’t revert to cooler defaults if temperature rises.

Cooler defaults can be easily manually restored when

necessary.) Manually changing setpoints in the program

menu automatically disables Autoset.

THREE BUTTON USER INTERFACE:

Test (Up):

Lights (Prog):

Silence (Down):

WHILE IN RUN OR ALARM MODE

Test: Press to test and to view alarm

parameter settings.

Lights: Press to manually activate and

deactivate compartment

Silence: Press to acknowledge an

alarm.

WHILE IN PROGRAM MODE

Up: Press to increase and alarm

parameter values.

Lights: Press to select PAS-PRO™

preset and program menu options.

Down: Press to decrease alarm

parameter values.

VISUAL ALARM ANNUNCIATION:

NOTE the following:

1. During normal operation the monitored temp

displays constantly.

2. Any abnormal or alarm condition (except Panic

Alarm) alternates between monitored condition

display and monitored temp as follows: (In order

of priority.)

ALARM TYPE ABNORMAL

CONDITION

ALARM

CONDITION

PANIC ALARM [Non applicable] “HLP” + “HLP”

DOOR AJAR Door Light On “Dor” +

Temperature

TEMP OUT OF

RANGE

“HI” or “LO” +

Temperature

“HI” or “LO”

+ “AL” +

Temperature

AC POWER

FAILURE

“PF” +

Temperature

A single dot will

display

Panic Alarm Operation: Two types of Panic Alarm are

available:

• Manual Panic Alarm – (Requires optional IP-1).

The alarm can be cleared by either pressing the

Silence button on the 75LC or by opening and

closing the door. (This requires door contacts).

• Auto Panic Alarm – (Requires magnetic contacts,

and either or both of the following IP-1 & MD -1).

Auto Panic offers protection for persons who may

be hurt or disabled and cannot activate a Manual

Panic Alarm.

This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the sof tware described herein without prior written authorization is strictly prohibited.

Page 3 of 12

MODULARM 75LC Multi-Monitor Installation & Operating

Using AutoPanic with an IP-1:

• If Autopanic is enabled, pressing the IP-1 at

any time while the door is closed starts the 20

minute Auto Panic Timer. When the Auto Panic

timer runs out, the IP-1 starts to beep and blink

for 40 seconds. Repressing IP-1 during a beep

and blink resets the Auto Panic Timer for 20

minutes.

• If not pressed, A Panic Alarm automatically (HLP)

annunciates on the 75LC to let others know that

someone may be injured or disabled inside the

walk-in. Auto Panic Alarm is cleared in the same

way as a Manual Panic Alarm.

Using AutoPanic with an MD-1:

• The MD-1 makes Autopanic easier to use. Each

time motion is detected, the MD-1 restarts the 20

minute Auto Panic Timer. If no motion is detected

for 20 minutes the IP-1 (if present) starts to beep

and blink for 40 seconds.

• If no motion is detected a Panic Alarm (HLP)

automatically annunciates on the 75LC to let

others know that someone may be injured or

disable inside the walk-in. Auto Panic Alarm is

cleared the same way as a Manual Panic Alarm.

AC Power Failure Operation:

• When power failure occurs: The 75LC will

alternate PF and the Monitored temperature

for 1 minute as shown above under “Abnormal

Condition”.

• For power failures under 1 minute: Normal

operation restores automatically and the incident

is ignored.

• For power failures beyond 1 minute: The

Alarm relay activates, and the horn will chirp

intermittently with a blinking decimal point.

Pressing at any time during a power Silence

failure silences the horn for 1 minute, and briefly

displays the monitored condition.

ACCESSORIES:

Three accessories expand 75LC operation:

1. IP-1 Illuminated Push Button

2. MD-1 Motion Detector

3. . MC-1 Magnetic Contacts

These accessories are low voltage devices, connected

directly to and powered by the 75LC. Accessories may

be used individually or in combination. To help eliminate

programming when common settings are desired, the 75LC

comes equipped with Autodetect.

What is Autodetect?

The Autodetect function in the 75LC senses if and when

an accessory is connected to the 75LC and automatically

integrates the connected accessory into device

operation. No special programming is required. The 75LC

ships with Autodetect enabled for the accessory inputs.

(Ex: If magnetic contacts are not connected, the 75LC

operates as if there are no magnetic contacts. Once

magnetic contacts are connected, Autodetect senses this

and provides door ajar alarm function and automatically

automatic lights on function when the door is open.)

Accessories Information:

• IP-1 Illuminated Push Button – low voltage The

IP-1 inside mounts of the walk-in and provides

both a lights control switch panic alarm and a

switch. (Press to control lights, press and hold

for 2 seconds to activate Panic Alarm ). “HLP”

A buzzer and lights built into the IP-1 provide

warning to personnel in the walk-in that lights

may turn off if the IP-1 isn’t pressed.

• MD-1 Motion Detector – (Not recommended

for freezers) low voltage MD-1 The mounts

inside of the walk-in and duplicates the light ON

control function of the IP-1 button when activated

by movement of personnel inside of the walk-in.

• Low voltage MC-1 Magnetic Contacts –

magnetic contacts sense door status and

provide both a door ajar alarm switch and a

lights on switch relative to the status of the

door. One set of magnetic contacts come with

each 75LC, various styles are available.

OPERATION

LIGHT CONTROL OPERATION: The 75LC offers three ways

to control lights:

1. Regular timed lighting

2. Patented timed lighting with Auto Panic (default),

3. Untimed, manual on-off light control (replaces light

switches.)

Password selectable presets are used to easily change or

select the desired mode of operation for your configuration

(See pg. 6)

NOTE: The DOOR light blinks whenever lights are on.

1. Regular Timed Lighting Operation – When lights

turn on, the lights-off timer is activated. Lights will

turn off when the lights-off timer expires. Operation

is as follows:

• Without Accessories: Press the Lights Button

on the 75LC to turn lights on and start lights-off

Specyfikacje produktu

Marka:	Kitchen Brains
Kategoria:	nieskategoryzowany
Model:	Modularm 75LC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kitchen Brains Modularm 75LC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Kitchen Brains

Kitchen Brains Modularm 75LC Instrukcja

9 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools 010-084 Instrukcja

6 Października 2024

Outwell Scenic Road 250 Instrukcja

5 Października 2024

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024

Impact QuikBalance Instrukcja

4 Października 2024

Impact CA-112 Instrukcja

4 Października 2024

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024

Impact LS-BHA Instrukcja

4 Października 2024

Impact LKB-5C Instrukcja

4 Października 2024

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024

Impact RST-001 Instrukcja

4 Października 2024