Instrukcja obsługi Kinzo 29638
Kinzo
Sprężone powietrze
29638
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kinzo 29638 (56 stron) w kategorii Sprężone powietrze. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/56
C Persluchtgereedschapsset, 5 st.
D Kit d’outils pneumatiques, 5 pcs
E Set utensili pneumatici 5 pz.
F Conjunto de herramientas de aire 5 pzs.
G Conjunto de ferramentas pneumáticas,
5 pçs
H 5-os. ilmatyökalusarja
I Trykkluftsverktøysett med 5 deler
J 5 dlr set med luftverktyg
K Trykluftsværktøjssæt med 5 dele
L 5 db-os pneumatikus szerszámkészlet
M Комплект вентилационни
инструменти, 5 бр.
N Set scule pneumatice 5 buc.
O Sada s kompresorem 5 ks
P 5 ks súprava vzduchových nástrojov
Q Komplet zračnih alata, 5 kom.
R Zestaw narzędzi pneumatycznych 5 szt.
S 5 vnt. pneumatinių įrankių rinkinys
T Набор пневматических инструментов,
5 предметов
U 5-osaline pneumaatiliste tööriistade
komplekt
V 5 gab. pneimatisku darbarīku komplekts
W 5 prç. Havalı el aleti seti
X Σετ εργαλείων πεπιεσμένου αέρα, 5 τεμ.
z 5 kos Komplet nastavkov za kompresor
5pcs air tool set
St. Druckluft-Werkzeugsatz
St. Druckluft-Werkzeugsatz
St. Druckluft-Werkzeugsatz
St. Druckluft-Werkzeugsatz
5x
Persluchtgereedschapsset, 5 st.
K
Trykluftsværktøjssæt med 5 dele
5x
High quality reliable tools.
HANDTOOLS
29638_manual.indd 1 11-10-11 13:21
2
AAir tool kit
Instruction manual
sAfety instructions
1. Read these instructions carefully before fi rst use. Failure to observe the following precautions
can result in serious injury.
2. NEVER use this tool near explosive materials, liquids, or gases.
3. Disconnect equipment from the air supply before changing attachments or accessories.
4. Do not wear baggy or loose clothing when working.
5. Wear appropriate protective equipment such as safety goggles, gloves, hearing protection
and / or respiratory protection.
6. During operation, make sure you can maintain fi rm, secure footing.
7. Disconnect from the air supply prior to the installation of accessories, or before maintenance
on pneumatic devices.
8. NEVER aim a compressed air device at yourself or anyone else. This can result in serious
injury.
9. Tighten all fi ttings and always be sure that your equipment is in good working condition.
10. If the tool starts to operate unusually, release the trigger and disconnect the pneumatic
device from the air supply. Do not use the air unit again until it has been either tested or
repaired.
11. Only use accessories suitable for use with compressed air.
WArning!
Improper use of this type of device can cause injury and property damage. Read these
instructions and all safety precautions carefully before use. When working with air tools,
always follow standard safety guidelines to minimise the risk of injury.
WArrAnty
Please read these instructions carefully before fi rst use.
If you have any questions about this product, please contact your supplier.
This warranty does not cover damage due to improper use, improper maintenance, or normal wear and tear.
It is void if the tool has been repaired or modifi ed by an unauthorised person.
Air Pressure
For satisfactory results when working with compressed air equipment, ensure it has a proper air supply. The
pressure of the air intake should have a pressure of 6.3 bar (90psi).
29638_manual.indd 2 11-10-11 13:21
3
A
A portion of the water content, however, collects in the piping, where it may enter the tool mechanism.
To avoid issues that may arise, install an Air Filter and Regulator between the compressor and the tool and
ensure proper lubrication.
Tool
Leader hose
Couplet Recall hose
Water separator
Drain daily
Air supply
Regulator
Nipple
Air hose
Clean the hose with a blast of compressed air before connecting the hose to the air tool. This will help pre-
vent both moisture and dust within the hose from entering the tool and causing possible rust or malfunction.
To compensate for an unusually long hose (over 25 ft), the line pressure should be increased accordingly.
Accessories
Use only high quality compressed air couplings and connectors. A damaged plug or a coupling may cause
injury.
Drainage
Air line
Use a 3/8” air hose between the compressor and the tool. Compressed air is cooled and its water content
condenses as soon as the air leaves the compressor.
29638_manual.indd 3 11-10-11 13:21
Specyfikacje produktu
| Marka: | Kinzo |
| Kategoria: | Sprężone powietrze |
| Model: | 29638 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kinzo 29638, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sprężone powietrze Kinzo
13 Września 2024
30 Sierpnia 2024
Instrukcje Sprężone powietrze
Najnowsze instrukcje dla Sprężone powietrze
27 Września 2024
27 Września 2024