Instrukcja obsługi Kiev 35A

Kiev nieskategoryzowany 35A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kiev 35A (5 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
KIEV 35A
Operating Instructions
1.GENERAL
The Kiev-35A is a miniature compact camera with an automatic exposure time setting. It is intended for amateur
photography.
Used in the c era is a 35-millimeter film in the standard magazines (36 shots of 24x36 mm on film of 1.6 m in length). am
The five-element lens MC KORSAR 2.8/35 (MC KOPCAP), built into the c era, ensures the image of a high quality. The lens am
stopping-down limit is 16. The lens moves out to the operating position when the front cover is opened.
The central interlenses shutter with an electronic expos e control operates automatically and provides the expos e timeur ur s
over the range from 1/ 500 to 4 s (steplessly).
The viewfinder is optical with a luminous frame which limits the scene. Available in the viewfinder field of vision is a sc e al
and a pointer which indicates the exposure time auto tically preset by the shutter over the range from 1/500 to 1/30 s. ma
The lens is focused with the aid of a distance scale over the range from 1m to oo.
The frame counter reads the number of shots made and is reset automatically to the initial position upon opening the camera
back. In so doing, the shutter must be released.
The camera exposure meter ensures the automatic exposure time setting depending on the brightness of the subject
photographed at the preset values of a film sensitivity and of diaphragm. The operating rang of brightness of the built-i a e n
exposure meter is from 6.4 to 6400 cd/m . І
The film sensitivity range is from 25 to 800 units of GOST/ISO.
A battery or a set of cells rated to 6V (overall dimensions: dia 13 mm, height 20.5 mm) type PX27 is used as a power
source.
Th camera operates ove the temperature range from minus 15 to plus 45°C (when the camera is completed with a powee r r
source whose operating temperature range is less than the above-mentioned one, the camera operating range is limited
respectively).
The camera is provided with a synchronizer for ope tion on combination with flash lamps. ra
The camera back is removable.
The features of the KIEV-35A camera are a simplicity in handling, compactness (101.5x64x32.5 mm) and little mass (up to
200 g).
The camera is protected by Inventor's Certificates Nos 712795 and 1278769.
2. DELIVERY SET
Camera 1
Guide yoke insert 1
Case 1
Operating Instructions 1
Packing box 1
3. MAIN UNITS AND PARTS
1 lens
2 light detector window
3 viewfinder
4 power source seat cover
5 front cover
6 lens focusing ring
7 depth-of-field scale
8 diaphragm setting ring
9 diaphragm scale
10 release button
11 frame counter window
12 shutter cocking lever
13 yoke with contact for cableless flash lamp
14 film rewinding knob
15 folding handle of film rewinding knob
16 back
17 shutter cocking handwheel
18 viewfinder eyepiece
19 back lock lever
20 film sensitivity scale
21 tripod nut 1/4"
22 film t nsport mechanism disengagement button ra
23 film sensitivity knob
24 film sensitivity setting index
4. OPERATING PROCEDURE
4.1. Power Source Installation
To install the power source, proceed as follows:
fully open front cover 5;
unscrew cover 4 of the power source seat with the aid of a coin inserted into the slot;
install the power source into the camera seat observing the polarity ("+" to the cover);
screw up the cover.
If the se icable power source has been installed correctly, the camera shutter must operate upon being cocked and the rv
release button being depressed.
Close the front cover.
4.2. Lo ingad
The camera is loaded with a film in standard magazines.
The film should be pulled out from the magazine without difficulty and jamming.
The camera may be loaded in daylight ( eferably in slightly lighted places or at least in one's own shadow). pr
Turn lever 19 of the camera back lock to the position in which a red mark appears. Shift the camera back down through
about 7 mm and remove it.
If, in doing so, the frame counter has failed to return to the initial position, cock the camera shutter and depress the release
button (with the front cover fully open).
B sure that the film is pulled out from the magazine without difficulty Insert magazine 25 loaded with film into th camee . e ra
left-hand seat. Fix the film on spool 26 by threading the film end under the spool ring. In so doing, tooth 27 of the spool
must get into the film perforation window.
If necessary, the film can be tighted by rotating the take-up spool. Reinstall the camera back. Turn lever 19 of the camera
back lock to the position in which the red mark disappears.
Set the loaded film sensitivity by turning knob 23 until the sensitivity value of the film in scale 20 coincides with index 24. In
doing so, the film sensitivity value is set into the exposure meter and is taken into account in the process of the exposure
determining and auto tic time settingma .
If the loaded film sensitivity is not marked in scale 20 set the nearest least value (e.g., set number 45 for 65 units of GOST).
If given on the packing film sensitivity is in DIN, ASA, ISO units use the Table given below.
Comparis Table of Film Sensitivity its on Un
GOST/ISO units DIN units ASA, ISO units
16 13 16
25 15 25
32 16 32
50 18 50
64 19 64
100 21 100
125 22 125
200 24 200
250 25 250
400 27 400
500 28 500
800 30 800
Cocking the shutter and transporting the fil through one ame is carried out by double turning lever 12 as far as it will go. m fr
For the lever comes back straight to its initial position accompany its movement with a finger.
To set the first frame, wind up the film end exposed in loading on spool 26. For this fully open front cover 5. In doing so,
release button 10 becomes released.
Th winding of the exposed film end is carried out by ransporting the film with the further depressing of the release butte t on
after each frame till the figure "0" is set opposite the index in fr e counter window 11am .

Specyfikacje produktu

Marka: Kiev
Kategoria: nieskategoryzowany
Model: 35A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kiev 35A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Kiev

Kiev

Kiev 35A Instrukcja

15 Czerwca 2024
Kiev

Kiev 88 CM Instrukcja

15 Czerwca 2024
Kiev

Kiev 88 TTL Instrukcja

15 Czerwca 2024
Kiev

Kiev 80 Instrukcja

15 Czerwca 2024
Kiev

Kiev 19M Instrukcja

15 Czerwca 2024
Kiev

Kiev 88 Instrukcja

15 Czerwca 2024
Kiev

Kiev 4 Instrukcja

15 Czerwca 2024
Kiev

Kiev 4A Instrukcja

15 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024