Instrukcja obsługi Kicker Solo-Baric DS10L5
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker Solo-Baric DS10L5 (4 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
L5
SOLO-BARICSUBWOOFER
S , S , S , S15L5 12L5 10L5 8L5
©2006 Stillwater Designs
WiringOptions
Solo-Baric subwoofers are available with dual 2 voice coils. Both coils must beΩ(ohm) or dual 4Ω
connected to a source of amplification. The dual 2Ωwoofer will generate a 1 load if the coils areΩ
wired in parallel or a 4Ωload in series. The dual 4 woofer will provide a 2Ω Ω load wired in parallel or
8Ωload wired in series. The terminals with the white dots are for the first voice coil. The terminals with
solid-red and solid-black markings are for the second voice coil. See Figures 1 and 2.
C IONF GURATION
SOLO BARICL5SUBWOOFER
S15L5 / S12L5 / S10L5 / S8L5
Models:
Solo-BaricL5Subwoofer
Owner’sManual
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
_________________________
_________________________
_________________________
_________________________
Please allow two weeks of break-in time for the subwoofer to reach optimum bass performance.
23
INSTA ALL TION
ParallelWiring
SeriesWiring
Dual 2 Voice Coils = 4Ω Ω Load
Dual 4 Voice Coils = 8Ω Ω Load
Dual 2 Voice Coils = 1Ω Ω Load
Dual 4 Voice Coils = 2Ω Ω Load
F uig re 1
F u ig re 2
CutoutDimensions
SealedEnclosureApplications
The Solo-Baric generates more sound pressure than an equivalently-sized round speaker and excels
when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest
response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive
amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.
The Solo-Baric high performance suspension system can operate in a larger sealed enclosure. This
maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ
enclosure generates a very flat response curve and superbly extends the subbass response.
Solo-Baric woofers perform well in any size sealed enclosure between the Compact and SQ volume
recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact
bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the
recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations
have been calculated with the airspace inside the enclosure and include the displacement of the woofer.
All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not
make the airspace greater than the SQ, maximum enclosure volume, recommendation.
Model:
S8L5
S10L5
S12L5
S15L5
Sealed MaximumSQ ( E c o un l s reVolume)
.75 ft3(21.24L) Power Handling = 155W RMS
1.0 ft3(28.32L) Power Handling = 450W RMS
2.0 ft3(56.64L) Power Handling = 500W RMS
6.0 ft3(69.92L) Power Handling = 450W RMS
Sealed MinimumCompa tc ( E c o un l s reVolume)
.33 ft 3(9.34L) Power Handling = 180W RMS
.66 ft3(18.69L) Power Handling = 450W RMS
.88 ft3(24.92L) Power Handling = 600W RMS
1.5 ft3(42.48L) Power Handling = 750W RMS
Model:
Nominal Impedance [Zn], ohm [per coil]
Resonance Frequency [fs], Hz
Power Handling Watts, Peak (RMS)
Total Q-Factor [Qts]
Equivalent Volume [Vas], ft
3(L)
Outer Frame Dimension, in (cm)
Mounting Depth, in (cm)
S12L5
2 or 4
31.8
1200 (600)
.472
2.71 (76.74)
12 5/8 (32)
6 13/16 (17.3)
S10L5
2 or 4
33.3
900 (450)
.403
1.53 (43.34)
10 11/16 (27.1)
6 3/16 (15.7)
S8L5
2 or 4
46.3
600 (300)
.620
.446 (12.64)
8 13/16 (22.4)
4 3/4 (12.1)
S15L5
2 or 4
24.0
1500 (750)
.428
7.92 (224.36)
15 5/8 (39.7)
8 5/8 (21.9)
Measurements based on the 2 ohm dual voice coil models.
Performance
Model:
S8L5
S10L5
S12L5
S15L5
Panel B, in (cm)
10x8 (25.4x20.3)
12x10.5 (30.5x26.7)
13x11.5 (33x29.2)
16.5x11.5 (42x29.2)
Panel A, in (cm)
10x10 (25.4x25.4)
12x12 (30.5x30.5)
13x13 (33x33)
16.5x16.5 (42x42)
Volume, ft
3(L)
.33 (9.34)
.66 (18.69)
.88 (24.92)
1.50 (42.48)
Panel C, in (cm)
8x8.5 (20.3x21.6)
10.5x10.5 (26.7x26.7)
11.5x11.5 (29.2x29.2)
15x11.5 (38.1x29.2)
P m o d u hanel Di ensi ns forCompactSeale Enclosures sing 3/4” (1.9cm) t ick MDF:
F uig re 3
Coil 2 +
Coil 2 +
Coil 1 +
Coil 1 +
Coil 1 -
Coil 1 -
Coil 2 -
Coil 2 -
Amplifier -
Speaker
Connection
Amplifier -
Speaker
Connection
Amplifier +
Speaker
Connection
Amplifier +
Speaker
Connection
13 3/4”
(34.9cm)
9 5/16”
(23.7cm)
7 1/4”
(18.4cm)
S8L5
S 01 L5
S 21 L5
S15L5
S8L5 - 1.5” (38.1mm)
S10L5 - 1.5” (38.1mm)
S12L5 - 1.75” (44.5mm)
S15L5 - 1.7” (43.2mm)
CornerRadius:
A
B
C
F uig re 4
11 1/16”
(28.1cm)
13 3/4”
(34.9cm)
9 5/16”
(23.7cm)
7 1/4”
(18.4cm)
11 1/16”
(28.1cm)
Y
X
Z
4 5
INSTA ALL TION
INSTA ALL TION
VentedEnclosureApplications
Ported Solo-Barics? Absolutely...and with a vengeance! These enclosures incorporate massive slot-
loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your
“skin bounce on your bones!” These boxes are the enclosure of choice for outrageous street bass and
high performance SPL contests. If space is not a problem and you want to get the most from your
Solo-Baric, try one of these ported designs. You will not be disappointed.
The ported Compact design increases bass efficiency and fits in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more
output in this crucial frequency band.
The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers
the sonic output needed to win SPL contests and it produces bass notes “all the way down to the
cella”. This design turns heads and jump starts your heart.
A Note on PowerHandlingCapacity
Solo-Baric subwoofers will handle massive amounts of power in any of the recommended enclosures,
minimum or maximum. The smaller enclosures are best for use in limited-space applications.
The larger recommended enclosures will yield slightly more bass at the lowest frequencies.
The listed Power Handling capacities assume that both voice coils are in use.
Always connect both coils in a dual voice-coil speaker.
Model:
S8L5
S10L5
S12L5
S15L5
Vented MaximumSPL/DeepBass ( E c o un l s reVolume)
1.0 ft3(28.3L) + port displacement
2 x 9.5” (5.1x24cm) port, 21.25” (54cm) long
Power Handling = 275W RMS
2.25 ft3(63.7L) + port displacement
3 x 11.25” (7.6x29cm) port, 18” (46cm) long
Power Handling = 450W RMS
3.25 ft 3(92L) + port displacement
3 x 13.25” (7.6x34cm) port, 14.5” (37cm) long
Power Handling = 600W RMS
6.0 ft3(170L) + port displacement
3.5 x 16.25” (8.9x41cm) port, 13.75” (35cm) long
Power Handling = 750W RMS
Vented MinimumCompa tc ( E c o un l s reVolume)
.66ft3(18.7L) + port displacement
1.5 x 9.5” (3.8x24cm) port, 19.25” (49cm) long
Power Handling = 275W RMS
1.25 ft3(35.4L) + port displacement
2.5 x 11.25” (6.4x29cm) port, 19.75” (50cm) long
Power Handling = 450W RMS
1.75 ft3(49.6L) + port displacement
2.5 x 13.25” (6.4x34cm) port, 22.5” (57cm) long
Power Handling = 600W RMS
3.0 ft
3(85L) + port displacement
2.5 x 16.25” (6.4x41cm) port, 19.5” (50cm) long
Power Handling = 750W RMS
BoxBuildingNotes
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
“template” inside your Solo-Baric’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add triangular bracing between each of the larger
unsupported panels. See Figure 5.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the S12L5 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:
[ (13.25” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft
3/ 1728
in3) = .77 ft3, and add this number to the internal volume of the enclosure, S12L5’s 1.75 ft3+ .77 ft3=
2.52 ft3. See Figure 6. Due to the necessary length of these ports, you may want to fold the port along
the bottom and back walls. It will be impractical to use round ports for these designs.
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airflow.
If you prefer an ultra-smooth bass response, you should loosely fill your Solo-Baric enclosure with
poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil
will slightly decrease efficiency, but will deepen and extend the low frequency output.
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport
the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view
the corresponding information. Please E-mail or call Technical Services support@kicker.com
(405) 624-8583 for specific or unanswered questions.
Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.
D r S S 2 = 3 x 3 fo 15L5, 1 L5
D 2 2 r S 0 S = x fo 1 L5, 8L5
D
D
D
F uig re 5
SOLO BARICL5SUBWOOFER
F u ig re 6
The displac me ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final esign d .
Th , e dimensions for X Y, d d an Z may vary based on t e t i h h ckness of t eh material use to ma e t ek h port.
Specyfikacje produktu
| Marka: | Kicker |
| Kategoria: | subwoofer |
| Model: | Solo-Baric DS10L5 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kicker Solo-Baric DS10L5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Kicker
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje subwoofer
- subwoofer Sony
- subwoofer Yamaha
- subwoofer Sharp
- subwoofer Pioneer
- subwoofer Philips
- subwoofer Technics
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer Origin Acoustics
- subwoofer KEF
- subwoofer Bose
- subwoofer Klipsch
- subwoofer Crestron
- subwoofer Behringer
- subwoofer Tangent
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer DAP-Audio
- subwoofer Denon
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Cambridge
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Auna
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Audioengine
- subwoofer Audiotec Fischer
- subwoofer Clarion
- subwoofer Pro-Ject
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Wharfedale
- subwoofer Magnat
- subwoofer Pyle
- subwoofer ELAC
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Sennheiser
- subwoofer Bowers & Wilkins
- subwoofer PreSonus
- subwoofer Monitor Audio
- subwoofer Audio Pro
- subwoofer Vonyx
- subwoofer Alto
- subwoofer Peavey
- subwoofer RCF
- subwoofer Harman Kardon
- subwoofer Aiwa
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Hifonics
- subwoofer Focal
- subwoofer Taga Harmony
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Bluesound
- subwoofer Deaf Bonce
- subwoofer Insignia
- subwoofer Piega
- subwoofer SVS
- subwoofer Arcam
- subwoofer Mac Audio
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Revel
- subwoofer Dynacord
- subwoofer Orion
- subwoofer Fender
- subwoofer Hertz
- subwoofer Kali Audio
- subwoofer KRK
- subwoofer Atlas Sound
- subwoofer Gemini
- subwoofer Martin
- subwoofer PMC
- subwoofer Sencor
- subwoofer Definitive Technology
- subwoofer Ground Zero
- subwoofer Stinger
- subwoofer PowerBass
- subwoofer Power Dynamics
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer TOA
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer Electro-Voice
- subwoofer AudioControl
- subwoofer SPL
- subwoofer Crunch
- subwoofer Match
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Argon
- subwoofer Cabasse
- subwoofer Audison
- subwoofer Caliber
- subwoofer Sonos
- subwoofer Musway
- subwoofer AV:link
- subwoofer Renegade
- subwoofer Heco
- subwoofer MB Quart
- subwoofer Massive
- subwoofer Nova
- subwoofer Atlantic
- subwoofer QTX
- subwoofer Konig
- subwoofer Boston Acoustics
- subwoofer QSC
- subwoofer ESI
- subwoofer Lanzar
- subwoofer Genelec
- subwoofer Apart
- subwoofer Max
- subwoofer Bazooka
- subwoofer Skytec
- subwoofer Tivoli Audio
- subwoofer Monoprice
- subwoofer Eve Audio
- subwoofer Yorkville
- subwoofer Axton
- subwoofer Nxg
- subwoofer Fostex
- subwoofer Power Acoustik
- subwoofer FBT
- subwoofer Amina
- subwoofer OSD Audio
- subwoofer Andover
- subwoofer Soundstream
- subwoofer PSB
- subwoofer Citronic
- subwoofer LTC
- subwoofer Bowers Wilkins
- subwoofer James
- subwoofer PSSO
- subwoofer Quadral
- subwoofer Wet Sounds
- subwoofer Extron
- subwoofer BW
- subwoofer Helix
- subwoofer Q Acoustics
- subwoofer Adam
- subwoofer Mission
- subwoofer Martin Audio
- subwoofer Morel
- subwoofer Avid
- subwoofer Ecler
- subwoofer Mtx Audio
- subwoofer Aquatic AV
- subwoofer DB Technologies
- subwoofer GoldenEar Technology
- subwoofer Roswell
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer Raveland
- subwoofer ANT
- subwoofer IMG Stage Line
- subwoofer Eikon
- subwoofer ESX
- subwoofer Wavemaster
- subwoofer Fluance
- subwoofer RetroSound
- subwoofer Pyramid
- subwoofer On-Q
- subwoofer Sound Ordnance
- subwoofer MadBoy
- subwoofer Planet Audio
- subwoofer Black Hydra
- subwoofer Totem
- subwoofer Energy
- subwoofer Mirage
- subwoofer Poly-Planar
- subwoofer SSV Works
- subwoofer PrecisionPower
- subwoofer Theater Solutions
- subwoofer Mordaunt Short
- subwoofer Triangle
- subwoofer Audiofrog
- subwoofer AudioSource
- subwoofer KLH Audio
- subwoofer Audibax
- subwoofer Proficient
- subwoofer Alphasonik
- subwoofer Cerwin-Vega
- subwoofer BMB
- subwoofer Glemm
- subwoofer ButtKicker
Najnowsze instrukcje dla subwoofer
13 Stycznia 2025
13 Stycznia 2025
11 Stycznia 2025
9 Stycznia 2025
9 Stycznia 2025
9 Stycznia 2025
9 Stycznia 2025
9 Stycznia 2025
8 Stycznia 2025
5 Stycznia 2025