Instrukcja obsługi Kicker iK 501

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker iK 501 (20 stron) w kategorii Dźwięk iPoda. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
English Version
Versión Español
SISTEMA ESTEREOFÓNICO DIGITAL PARA iPhone Y iPod
Manual dal Propietario
Deutsche Version
STEREOSYSTEM FÜR iPhone Und iPod iKICK DIGITAL
Benutzerhandbuch
Version Française
SYSTÈME STERÉO NUMÉRIQUE POUR iPhone Et iPod iKICK
Manual d`utilisation
iKICKDIGITALSTEREOSYSTEMFORiPHONE®ANDiPOD®
2009 iK501 Multilingual d01.indd 12009 iK501 Multilingual d01.indd 1 4/23/2009 11:50:08 AM4/23/2009 11:50:08 AM
2iK501STEREOSYSTEM
DIGITALSTEREOSYSTEMFORiPhone®ANDiPod®
Owner’sManual
The Kicker iKICK iK501 Digital Stereo System for iPhone and iPod is designed for “Livin’ Loud” with your iPod in the
home environment. The iK501 is fully featured with dual full-range 5” (`127mm) Kicker drivers and 3/4” (20mm) silk dome
tweeters driven by a powerful stereo amplifi er with digital signal processing. The 6” (152mm) square passive radiator
(subwoofer) on the back of the iK501 balances the sonic output, adding the punchy low-frequency response that put
Kicker subwoofers on the map. The rotary control and infrared remote allow simple, streamlined control of your iK501
Stereo System. The iK501 can be used with any 4th generation or newer iPod. In addition, the iK501 boasts a wide
range of connectivity options including stereo RCA outputs, composite video output, and an 1/8” stereo auxiliary input for
incorporating additional audio devices with your iK501 Stereo System. Note: 3rd Generation and older iPods must use
the auxiliary input instead of the Docking Bay.
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
iPod Model Apple® Adapter # iK501 Adapter Label
1. iPod Nano (2nd Gen) 2GB, 4GB & 8GB 11 NANO
2. iPod Nano (3rd Gen) 4GB & 8GB 13 NANO 3G
3. iPhone 3G 15 iPHONE 3G
4. iPod Nano (4th Gen) 16 NANO 4G
5. iPod Touch (2nd Gen) 17 TOUCH 2G
iK501
1. Choose the dock adapter that best fi ts your iPod or use
the universal adapter that came with your iPod. See the
table below.
2. Attach the adapter to the iK501’s docking bay.
3. Connect your iPod to the iK501’s dock connector.
4. Plug the power cable into the DC input on the back of
the iK501.
5. Plug the 2-prong electrical plug into a surge protected
electrical outlet.
DOCKINGYOURiPod
Figure 1
The iK501 docking station has been optimized to match the sonic output of the iPod with the iPod’s EQ in the “Off”
setting. The iPod’s “Sound Check” should also be off; otherwise you may experience poor bass response and lower
volume levels in your music.
2009 iK501 Multilingual d01.indd 22009 iK501 Multilingual d01.indd 2 4/23/2009 11:50:12 AM4/23/2009 11:50:12 AM
3
IMPORTANTSAFETYINSTRUCTIONS
Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent
damage to your self, your Kicker product, or your portable entertainment device.
The iK501 should not be used near water or in an environment where exposure to liquids is possible. This includes but is
not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should
not be placed on or near the iK501 Stereo System. The iK501 Stereo System should not be cleaned with liquid cleaners.
Use only a dry cloth to clean the iK501. Only use the iK501 in areas with adequate open ventilation allowing at least 4”
of space on all sides of the iK501. Do not set the iK501 on any surface or cover the iK501 with any object that could
impede the airfl ow to and from the iK501 Stereo System. The iK501 should not be placed near any source of heat. This
includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive
solar heat can be generated. Do not install the iK501 near any fl ame or place any fl ammable objects near the device.
The power outlet used to provide power to the iK501 should be accessible at all times. The polarized 2-prong electrical
plug has a wide blade and narrow blade that should fi t into the corresponding wide and narrow receiving connections
of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not fi t, consult with
an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that protects it
from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the
iK501. Do not run the cable through doorways or underneath objects that could damage the wire or tear the insulating
material surrounding the wire. Only use the manufacturer supplied power supply with the iK501. We recommend using a
surge protector/power conditioner and unplugging the iK501 during any electrical storms or situations that could cause
voltage fl uctuations in the electrical system.
Figure 2
Figure 3 Transport Handle
1/8” Stereo
Auxiliary Input
DC Power
22 Volts
IR Remote Receiver.
LCD Display
Docking Bay
Rotary Control
Vibration
Isolation
Pad
5” (127mm) Full-
Range Drivers
3/4” (20mm) Silk
Dome Tweeters
Skid-Resistant, Non-Marking Feet
Stereo RCA
Outputs
Passive
Square
Radiator
Composite
Video Output
2009 iK501 Multilingual d01.indd 32009 iK501 Multilingual d01.indd 3 4/23/2009 11:50:13 AM4/23/2009 11:50:13 AM

Specyfikacje produktu

Marka: Kicker
Kategoria: Dźwięk iPoda
Model: iK 501

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker iK 501, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą