Instrukcja obsługi Kicker Comp C10D4

Kicker subwoofer Comp C10D4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker Comp C10D4 (11 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
COMP SUBWOOFER
COMP8
COMP10
COMP12
COMP15
English Version
Versión Español
Altavoz Para Sonidos Graves
Deutsche Version
Tieftöner
Version Francaise
Haut-parleur d’Extrêmes Graves
LIVIN’ LOUD
2010 Comp e01.indd 1
2010 Comp e01.indd 1
2010 Comp e01.indd 1
2010 Comp e01.indd 12010 Comp e01.indd 1
2010 Comp e01.indd 1
2/19/2010 3:25:52 PM
2/19/2010 3:25:52 PM
2/19/2010 3:25:52 PM
2/19/2010 3:25:52 PM2/19/2010 3:25:52 PM2/19/2010 3:25:52 PM
2COMP SUBWOOFER
S
The
use
with
high
The
enc
a ve
Com
reco
bas
reco
have
All s
Comp Subwoofer Owner’s Manual
The Kicker Comp subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive
environment. Comp subwoofers are extremely versatile, excel in a sealed or vented box, and surpass
the competition on an infi nite baffl e (free-air) installation. They are made of advanced materials and
construction techniques to maintain optimal performance for years to come.
SPECIFICATIONS
WIRING
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model Comp Comp8 10 Comp Comp12 15
Nominal Impedance [Zn], ohm [per coil] 4 or 8 4 or 8 4 or 8 4 or 8
Resonance Frequency [fs], Hz 40 33 30 23
Power Handling Watts, Peak (RMS) 200 (100) 300 (150) 300 (150) 500 (250)
Sensitivity [SPLo], dB @ 1W, 1m 85.6 86.2 88.3 90.3
Total Q-Factor [Qts] .540 .585 .559 .404
Mechanical Q-Factor [Qms] 8.892 9.157 10.22 9.607
Electrical Q-Factor [Qes] .574 .625 .591 .422
Effective Excursion [EXmax™] in (mm) .34 (8.6) .38 (9.6) .38 (9.6) .45 (11.4)
DC Resistance [Re], ohm 3.85 3.78 3.65 3.32
Equivalent Volume [Vas], ft3 (L) .65 (18.54) 1.65 (46.94) 3.36 (95.18) 7.99 (226.14)
Net Displacement, in3 (cc) 31.4 (514.5) 51.7 (847.2) 70.6 (1156.9) 149 (2441.7)
Outer Frame Dimension, in (cm) 8-1/2 (21.6) 10-11/16 (27) 12-5/8 (32) 15-1/2 (39.3)
Mounting Depth, in (cm) 4-1/16 (10.3) 5-1/16 (12.8) 5-7/8 (14.8) 7-7/16 (18.9)
Hole Cut-Out Diameter, in (cm) 6-15/16 (17.5) 9-1/8 (23.1) 11 (27.9) 13-11/16 (34.7)
Co
Co
Co
Co
Co
Co
Co
C
Comp Comp Comp Comp8 / 10 / 12 / 15
Models:
Se
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine
KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum
performance.
Figure 1
Series Wiring
Parallel Wiring
Two 4 Woofers = 8 LoadΩ Ω
Two 8 Woofers = 16 LoadΩ Ω
Two 4 Woofers = 2 LoadΩ Ω
Two 8 Woofers = 4 LoadΩ Ω
2010 Comp e01.indd 2-3
2010 Comp e01.indd 2-3
2010 Comp e01.indd 2-3
2010 Comp e01.indd 2-32010 Comp e01.indd 2-3
2010 Comp e01.indd 2-3
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM2/19/2010 3:25:54 PM2/19/2010 3:25:54 PM
4COMP SUBWOOFER
fi nal
mult
the
dim
1.5”
wall
add
Com
Due
wan
will
Do
suc
or in
rem
dim
min
port
insu
If yo
resp
Com
Port
end
with
met
the
dec
exte
For
you
the
ww
sup
Sup
una
Com
mor
U.S
D47
D35
Oth
VENTED ENCLOSURE APPLICATIONS
These boxes are the enclosure of choice for outrageous street bass and high performance SPL contests.
If space is not a problem and you want to get the most from your Comp, try one of these ported designs.
You will not be disappointed. Comp subwoofers will handle massive amounts of power in any of the
recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-
space applications. The larger recommended enclosures will yield slightly more bass at the lowest
frequencies.
The ported Compact design increases bass effi ciency and fi ts in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box.
The SPL / Deep Bass ported design has even more output in this crucial frequency band. The SPL /
Deep Bass is the largest and most effi cient enclosure design.
INFINITE BAFFLE MOUNTING
The infi nite baffl e mounting method effectively utilizes the rear deck and trunk space of most sedan type
vehicles. The Comp subwoofer does not require a sealed enclosure for thumpin’ performance. Carefully
install the subwoofer in the baffl e. Mark the rear deck or parcel shelf for the hole cut-out diameter of the
subwoofer and cut the hole. The rear deck may need to be reinforced to help hold the weight of the
subwoofer and to keep it from fl exing during playback. Mount 3/4” (1.9 cm) thick MDF (Medium Density
Fiberboard) to the bottom of the deck. Mark the MDF and cut the holes. If MDF is not available in your
area, use high grade plywood. It is important to isolate the sound coming off the front of the subwoofer
from the sound radiating from the back of the subwoofer. This isolation is usually accomplished by using
the driver in a factory speaker location, or in a location with a semi-isolated rear chamber.
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your Comp’s shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the
P.O
Vented Compact Comp Comp8 10 Comp12 Comp 15
Box Volume, ft3 (L) .66 (18.7) 1.25 (35.4) 1.75 (49.6) 3 (85)
Port Opening, in x in (cm x cm) 1.5 x 8 (3.8 x 20.3) 1.5 x 10.5 (3.8 x 26.7) 2 x 12.5 (5.1 x 31.8) 2.5 x 15.5 (7 x 39.4)
Port Length, in (cm) 18 (45.7) 14.5 (36.8) 16 (40.6) 17 (43.2)
Power Handling, RMS 55 125 150 250
Vented SQ Comp Comp8 10 Comp Comp12 15
Box Volume, ft3 (L) 1.2 (34) 1.75 (49.6) 2.25 (63.7) 4 (113.3)
Port Opening, in x in (cm x cm) 1.5 x 8 (3.8 x 20.3) 1.5 x 10.5 (3.8 x 26.7) 2 x 12.5 (5.1 x 31.8) 3 x 15.5 (7.6 x 39.4)
Port Length, in (cm) 12.25 (31) 13.25 (33.7) 16.375 (41.6) 16.25 (41.3)
Power Handling, RMS 55 125 150 250
Sou
spe
refe
Note: If mounting in trunk space or other compartments of the vehicle, pay attention to cable lines, trunk springs, hinges
and seat mechanisms that could cause problems with the operation of the vehicle or stereo system. Carefully lay the
stereo system cables; pay attention to seat fasteners and other items that could harm the cables.
2010 Comp e01.indd 4-5
2010 Comp e01.indd 4-5
2010 Comp e01.indd 4-5
2010 Comp e01.indd 4-52010 Comp e01.indd 4-5
2010 Comp e01.indd 4-5
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM
2/19/2010 3:25:54 PM2/19/2010 3:25:54 PM2/19/2010 3:25:54 PM

Specyfikacje produktu

Marka: Kicker
Kategoria: subwoofer
Model: Comp C10D4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker Comp C10D4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Kicker

Kicker

Kicker 51MWF104 Instrukcja

13 Stycznia 2025
Kicker

Kicker 51MWF124 Instrukcja

13 Stycznia 2025
Kicker

Kicker 48CWR154 Instrukcja

12 Stycznia 2025
Kicker

Kicker 51MWE104 Instrukcja

10 Stycznia 2025
Kicker

Kicker 51MWE124 Instrukcja

10 Stycznia 2025
Kicker

Kicker 50CVX154 Instrukcja

1 Stycznia 2025
Kicker

Kicker 50CVX124 Instrukcja

1 Stycznia 2025
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio FS108-W5 Instrukcja

2 Kwietnia 2025
SoundTube

SoundTube CM1001D Instrukcja

2 Kwietnia 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Instrukcja

1 Kwietnia 2025
Phase Technology

Phase Technology PL-12p Instrukcja

30 Marca 2025
ETON

ETON Graphit 8-2 Instrukcja

19 Marca 2025
ETON

ETON Graphit 8-4 Instrukcja

19 Marca 2025
ETON

ETON Graphit 10-4 Instrukcja

19 Marca 2025
ETON

ETON MW 10 FLAT Instrukcja

19 Marca 2025
ETON

ETON PW 8 Instrukcja

19 Marca 2025
ETON

ETON USB 6 AR Instrukcja

19 Marca 2025