Instrukcja obsługi Kenwood KRF-V5050D

Kenwood odbiornik KRF-V5050D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood KRF-V5050D (44 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/44
Operations Preparations
Additional Information Remote Control
AUDIO VIDEO SURROUND RECEIVER
VR-506
VR-505
VR-517
KRF-V6050D
KRF-V5050D
KRF-V5550D
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-4942-10 03 MA (K, P, Y, M, X, I) 0009
PR
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation modes
may result in incorrect operations.
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country and
sales area.
2
Preparations
Units are designed for operation as follows.
U.S.A. and Canada........................................... AC 120 V only
Australia ........................................................... AC 240 V only
Europe and U.K................................................ AC 230 V only
China and Russia ............................................ AC 220 V only
*Other countries ........... AC 110-120 / 220-240 V switchable
Note:
Our warranty does not cover damage caused by excessive line voltage
due to improper setting of the AC voltage selector switch.
* AC voltage selection
Move switch lever to
match your line voltage
with a small screw-
driver or other pointed
tool.
AC voltage selector switch
The AC voltage selector switch on the rear panel is set to the voltage that
prevails in the area to which the unit is shipped. Before connecting the
power cord to your AC outlet, make sure that the setting position of this
switch matches your line voltage. If not, it must be set to your voltage
in accordance with the following direction.
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN-
SIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF UNINSULATED “DAN-
GEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE
THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTI-
TUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Safety precautions
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-
ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-
ENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-
PANYING THE APPLIANCE.
Unpack the unit carefully and make sure that all accessories are put aside
so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is
damaged or fails to operate, notify your dealer immediately. If your unit
was shipped to you directly, notify the shipping company without delay.
Only the consignee (the person or company receiving the unit) can file a
claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials
for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Before applying the power
Caution : Read this page carefully to ensure safe
operation.
Unpacking
*AC plug adaptor (1)
*Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where use
is necessary.)
For VR-517 and KRF-V5550D
Batteries (R6/AA) (2)
Remote control unit (1)
RC-R0617
Remote control unit (1)
RC-R0511
Remote control unit (1)
RC-R0615
Batteries (R6/AA) (2)
Accessories
FM indoor antenna (1) AM loop antenna (1)
For VR-505 and KRF-V5050D
Batteries (R6/AA) (2)
Microcomputer malfunction
If operation is not possible or an erroneous display appears, even though
all connections have been made properly, reset the microcomputer
referring to “In case of difficulty”. ·
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction.
Be specially careful not to use contact cleaners containing oil, for
they may deform the plastic component.
L
VIDEO 1
RAL C LR
LR B
PLAY INREC OUTPLAY IN
MONITOR
OUT VIDEO 1DVD
R
AC 110V -
120V
AC 220V -
240V
75µs
AM 10kHz
FM 100kHz
50µs
AM 9kHz
FM 50kHz
DE-
EMPHA SIS
CHANNEL
SPACE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
For VR-506 and KRF-V6050D
3
OperationsOperations Preparations
Remote Control
Additional Information
Before applying the power ................... 2
Safety precautions .............................................. 2
Unpacking .......................................................... 2
How to use this manual ...................................... 4
Special features .................................................. 4
Names and functions of parts ................ 5
Remote control unit (RC-R0615)
(VR-506/KRF-V6050D) ....................................... 6
Remote control unit (RC-R0511)
(VR-505/KRF-V5050D) ....................................... 7
Remote control unit (RC-R0617)
(VR-517/KRF-V5550D) ....................................... 8
Setting up the system ......................... 9
Connecting audio components ......................... 10
Connecting video components ......................... 11
Connecting a DVD player (6-channel input) ...... 12
Digital connections ........................................... 13
Connecting to the AV AUX jacks
(VR-506/517/KRF-V6050D only) ....................... 14
Connecting the antennas .................................. 14
Connecting the system control ......................... 15
Connecting the speakers .................................. 16
Preparing the remote control ............................ 18
Preparing for surround sound ............... 19
Speaker settings ............................................... 19
Normal playback .............................. 20
Preparing for playback ...................................... 20
Listening to a source component ..................... 21
Adjusting the sound .......................................... 21
Recording ...................................... 22
Recording audio (analog sources) .................... 22
Recording video ................................................ 23
Recording audio (digital sources) ...................... 23
Listening to radio broadcasts ............... 23
Tuning radio stations ........................................ 23
Presetting radio stations manually .................... 24
Receiving preset stations .................................. 24
Receiving preset stations in order (P.CALL) ...... 24
Ambience effects.............................. 25
Surround modes ............................................... 25
Surround play ................................................... 27
DVD 6-channel playback
(VR-506/517/KRF-V6050D/V5050D) ................ 28
Convenient functions ........................................ 28
Basic remote control operations for other
components(For VR-506/517/KRF-V6050D/
V5550D) ........................................ 30
Registering setup codes for other
components ...................................................... 30
Operating other components ............................ 30
Setup code chart .............................................. 31
DVD player operation keys
(For VR-505/KRF-V5050D) ............................... 32
Cassette deck, CD player & MD recorder
operations (For VR-505/KRF-V5050D) ............. 33
Cassette deck, CD player & MD recorder
operations (For VR-506/517/KRF-V6050D/
V5550D) ............................................................ 34
Other components’ operations (For VR-506/517/
KRF-V6050D/V5550D) ..................................... 36
Contents
Caution : Read the pages marked carefully to ensure
safe operation.
Preparations
Operations
Remote Control
Operations
Before applying the power
In case of difficulty ........................... 39
Specifications ................................. 41
Additional
Information
For the U.S.A.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment may cause harmful
interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– – Consult the dealer or an experienced radio / TV technician for help.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry
as practical.
For the U.S.A.
As an ENERGY STAR® Partner, Kenwood Corpora-
tion has determined that this product meets the
E SNERGY TAR® guidelines for energy efficiency.
This product can save energy. Saving energy reduces air pollution and
lowers utility bills.

Specyfikacje produktu

Marka: Kenwood
Kategoria: odbiornik
Model: KRF-V5050D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kenwood KRF-V5050D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Kenwood

Kenwood

Kenwood DMX129BT Instrukcja

25 Września 2024
Kenwood

Kenwood XM160-2-98 Instrukcja

22 Września 2024
Kenwood

Kenwood KMR-M300BT Instrukcja

22 Września 2024
Kenwood

Kenwood DPX301U Instrukcja

18 Września 2024
Kenwood

Kenwood KMR-XM500 Instrukcja

17 Września 2024
Kenwood

Kenwood KDC-X799 Instrukcja

16 Września 2024
Kenwood

Kenwood DPX792BH Instrukcja

16 Września 2024
Kenwood

Kenwood KMR-D558BT Instrukcja

12 Września 2024
Kenwood

Kenwood X501-1 Instrukcja

12 Września 2024
Kenwood

Kenwood KMM-BT525HD Instrukcja

11 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024