Instrukcja obsługi Kenwood KMM-BT408

Kenwood odbiornik KMM-BT408

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood KMM-BT408 (30 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/30
B5A-3850-00 [MN]© 2022 JVCKENWOOD Corporation
KMM-BT408
KMM-BT208
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
ENGLISH 3
Before Use
IMPORTANT
• To ensure proper use, please read through this manual before using this
product. It is especially important that you read and observe Warnings and
Cautions in this manual.
• Please keep the manual in a safe and accessible place for future reference.
WARNING
• Do not operate any function that takes your attention away from safe
driving.
• Do not ingest the battery, Chemical Burn Hazard.
The remote control supplied with this product contains a coin/button cell
battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part
of the body, seek immediate medical attention.
CAUTION
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent
accidents.
• Lower the volume before playing digital sources to avoid damaging the
speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside
the unit to prevent a short circuit.
• USB rating is indicated on the main unit. To view, detach the faceplate.
(Page 4)
• Depending on the types of cars, the antenna will automatically extend
when you turn on the unit with the antenna control wire connected
(page28). Turn off the unit or change the source to STANDBY when
parking at a low ceiling area.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
Ensure to replace only with the same type.
• Risk of fire, explosion or the leakage of flammable liquid or gas if the
battery is left in an extremely high temperature surrounding environment
and/or subjected extremely low air pressure. The battery pack or batteries
shall not be exposed to excessive heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable liquid or gas if the
battery is disposed into fire or a hot oven, recharged, shorted, mechanically
crushed or cut of the battery.
• If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
6 ENGLISH
Getting Started
2 Set the clock and date
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCKADJUST]
, then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”.
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7 Turn the volume knob to select
[DATEFORMAT]
, then press the knob.
8 Turn the volume knob to select
[DD/MM/YY]
or
[MM/DD/YY]
, then press
the knob.
9 Turn the volume knob to select
[DATESET]
, then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year” or “Month” “Day”
“Year”.
11 Press and hold to exit.
To return to the previous setting item, press .
3 Set the other optional settings
You can only set the following items while the unit is in STANDBY source.
1 Press SRC repeatedly to enter STANDBY.B
2 Press the volume knob to enter
[FUNCTION]
.
3 Turn the volume knob to select an item (see the following table), then
press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
Default: [XX]
[AUDIO CONTROL]
[SWITCH PREOUT] (For )
(Applicable only if is set to .) (Page 7)[X’OVER] [2WAY]
[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier). (Page 29)
[DISPLAY]
[EASY MENU] (For )
When entering ...[FUNCTION]
[ON] [ZONE 1]: illumination changes to white color. ;
[OFF] [ZONE 1] [COLOR SELECT]: illumination remains as color.
(Page 25)
• illumination changes to light blue color when you enter [ZONE 2]
[FUNCTION] [EASY MENU], irregardless of the setting.
• Refer to the illustration on page 24 for zone identification.
[TUNER SETTING]
[PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/AM/SW1/SW2). ; : Memorizes one station for [MIX]
each preset button, regardless of the selected band.

Specyfikacje produktu

Marka: Kenwood
Kategoria: odbiornik
Model: KMM-BT408

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kenwood KMM-BT408, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Kenwood

Kenwood

Kenwood DMX129BT Instrukcja

25 Września 2024
Kenwood

Kenwood XM160-2-98 Instrukcja

22 Września 2024
Kenwood

Kenwood KMR-M300BT Instrukcja

22 Września 2024
Kenwood

Kenwood DPX301U Instrukcja

18 Września 2024
Kenwood

Kenwood KMR-XM500 Instrukcja

17 Września 2024
Kenwood

Kenwood KDC-X799 Instrukcja

16 Września 2024
Kenwood

Kenwood DPX792BH Instrukcja

16 Września 2024
Kenwood

Kenwood KMR-D558BT Instrukcja

12 Września 2024
Kenwood

Kenwood X501-1 Instrukcja

12 Września 2024
Kenwood

Kenwood KMM-BT525HD Instrukcja

11 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024