Instrukcja obsługi Kenwood Excelon XM302-4

Kenwood odbiornik Excelon XM302-4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood Excelon XM302-4 (10 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

X302-4

XM302-4

KAC-314

CLASS D FOUR CHANNEL POWER AMPLIFIER

INSTRUCTION MANUAL

AMPLIFICATEUR DE PUISSANCE 4 CANAUX CLASSE D

MODE D’EMPLOI

AMPLIFICADOR DE POTENCIA DE 4 CANALES CLASE D

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance from

your new power amplier.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the

space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for

information or service on the product.

Model X302-4 / XM302-4/ KAC-314 Serial number

US Residence Only

B5A-3477-10/01 (KN / WN)

213 mm (8-3/8 )

149 mm (5-7/8 )

53 mm

(2-1/16)

Accessories / Accessoires / Accesorios

①

Ø4×16 mm

Self-tapping screws

Vis taraudeuses

Tornillo autorroscantes 4②Speaker level input cable

Câble d’entrée de niveau d’enceinte

Cable de entrada del nivel de altavoces 1

Dimensions / Dimensions / Dimensiones

Safety precautions

WARNING

To prevent injury or re, take the following precau-

tions:

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting and

wiring work to professionals.

• When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other

wires with the range of 5 mm2 (AWG 10) or more to

prevent wire deterioration and damage to the wire

coating.

• To prevent a short circuit, never put or leave any metal-

lic objects (such as coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

KENWOOD dealer.

• Do not touch the unit during use because the sur-

face of the unit becomes hot and may cause burns if

touched.

CAUTION

To prevent damage to the machine, take the follow-

ing precautions:

• Be sure the unit is connected to a 12 V DC power sup-

ply with a negative ground connection.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of water

splashing.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating

may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse, rst

disconnect the wiring harness.

NOTE

• If you experience problems during installation, consult

your KENWOOD dealer.

• If the unit does not seem to be working right, consult

your KENWOOD dealer.

Cleaning the unit

If the front panel gets dirty, turn o the power and wipe

the panel with a dry silicon cloth or soft cloth.

CAUTION

Do not wipe the panel with a hard cloth or a cloth damp-

ened by volatile solvents such as paint thinner and alco-

hol. They can scratch the surface of the panel and / or

cause the indicator letters to peel o.

To prevent battery rise

When the unit is used in the ACC ON position without

turning the engine ON, it depletes the battery. Use it after

starting the engine.

Protection function

The protection function is activated in the following

situations:

This unit is equipped with a protection function for

protecting this unit and your speakers from various acci-

dents or problems that can occur.

When the protection function is triggered, the power

indicator goes o and the amplier stops operating.

• When a speaker wire may be short-circuited.

• When a speaker output contacts ground.

• When the unit malfunctions and a DC signal is sent to

the speaker output.

• When the internal temperature is high and unit won’t

operate.

Wiring

• Take the battery wire for this unit directly from the bat-

tery. If it’s connected to the vehicle’s wiring harness, it

can cause blown fuses etc.

• If a buzzing noise is heard from the speakers when the

engine is running, connect a line noise lter (optional)

to each of the battery wire.

• Do not allow the wire to directly contact the edge of

the iron plate by using Grommets.

• Connect the ground wire to a metal part of the car

chassis that acts as an electrical ground passing elec-

tricity to the battery‘s negative terminal. Do not turn ⊖

the power on if the ground wire is not connected.

• Be sure to install a protective fuse in the power cord

near the battery. The protective fuse should be the

same capacity as the unit’s fuse capacity or somewhat

larger.

• For the power cord and ground, use a vehicle type

(reproof) power wring cord. (Use a power wiring cord

with the range of 5 mm2 (AWG 10) or more.)

• When more than one power amplier are going to be

used, use a power supply wiring wire and protective

fuse of greater current-handling capacity than the total

maximum current drawn by each amplier.

Speaker selection

• Using speakers with smaller input ratings than the

amplier’s output power would result in smoke gener-

ation or equipment failure.

• The impedance of the speakers that are going to be

connected should be 2 Ω or greater (for stereo con-

nections), or 4 Ω or greater (for bridged connections).

When more than one set of speakers are going to be

used, calculate the combined impedance of the speak-

ers and then connect suitable speakers to the amplier.

Combined

impedance

Installation / Installation / Instalación

Installation procedure

Since there are large variety of settings and

connections possible according to applications,

read the instruction manual well to select the

proper setting and connection.

1. Remove the ignition key and disconnect

the negative ⊖terminal of the battery to

prevent short circuits.

2. Set the unit according to the intended

usage.

3. Remove the Dressing cover.

4. Connect the input and output wires of the

units.

5. Connect the speaker wires.

6. Connect the power wire, power control

wire and grounding wire following this

order.

7. Install the installation ttings in the unit.

8. Attach the unit.

9. Attach the Dressing cover.

10. Connect the negative ⊖terminal of the

battery.

CAUTION

• Do not install in the below locations;

(Unstable location, In a location that inter-

feres with driving, In a location that gets wet,

In a dusty location, In a place that gets hot, In

a place that gets direct sunlight, In a location

that gets hit by hot air)

• Do not install the unit under the carpet.

Otherwise heat build-up occurs and the unit

may be damaged.

• Install this unit in a location which allows

heat to easily dissipate. Once installed, do not

place any object on top of the unit.

• The surface temperature of the amplier will

become hot during use. Install the amplier

in a place where people, resins, and other

substances that are sensitive to heat will not

come into contact with it.

• When making a hole under a seat, inside

the trunk, or somewhere else in the vehicle,

check that there is nothing hazardous on the

opposite side such as a gasoline tank, brake

pipe, or wiring harness, and be careful not to

cause scratches or other damage.

• Do not install near the dashboard, rear tray, or

air bag safety parts.

• The installation to the vehicle should securely

fasten the unit to a place in which it will not

obstruct driving. If the unit comes off due

to a shock and hits a person or safety part, it

may cause injury or an accident.

• After installing the unit, check to make sure

that electrical equipment such as the brake

lamps, turn signal lamps and windshield wip-

ers operate normally.

DUST

POUSSIÈRE

POLVO

MOISTURE

HUMIDITÉ

HUMEDAD

Installation board, etc.

(thickness: 15 mm or more)

Tableau d’installation, etc.

(épaisseur: 15 mm ou plus)

Tablero de instalación, etc.

(grosor: 15 mm o más)

①Parts included

Pièces comprises

Partes incluidas

Dressing cover

Enjoliveur

Cubierta de adorno

Protective

cover

Couvercle de

protection

Cubierta

protectora

XM302-4

NOTE

After wiring, x the protective cover securely with screws and washers.

REMARQUE

Après le câblage, xez fermement le couvercle de protection avec des vis et

des rondelles.

NOTA

Después de realizar el cableado, je rmemente la cubierta protectora con

tornillos y arandelas.

Cap

Capuchon

Tapa

Specyfikacje produktu

Marka:	Kenwood
Kategoria:	odbiornik
Model:	Excelon XM302-4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kenwood Excelon XM302-4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025

Kenwood DMX129BT Instrukcja

25 Września 2024

Kenwood XM160-2-98 Instrukcja

22 Września 2024

Kenwood KMR-M300BT Instrukcja

22 Września 2024

Kenwood DPX301U Instrukcja

18 Września 2024

Kenwood KMR-XM500 Instrukcja

17 Września 2024

Kenwood KDC-X799 Instrukcja

16 Września 2024

Kenwood DPX792BH Instrukcja

16 Września 2024

Kenwood KMR-D558BT Instrukcja

12 Września 2024

Kenwood X501-1 Instrukcja

12 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz SR-8000 Instrukcja

15 Stycznia 2025

AKAI AM-32 Instrukcja

15 Stycznia 2025

Peavey CKd 608 Instrukcja

15 Stycznia 2025

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025

S.M.S.L PA200 Instrukcja

14 Stycznia 2025

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025

Wavtech link700.4plus Instrukcja

13 Stycznia 2025

Behringer NU6000DSP Instrukcja

12 Stycznia 2025

Denon DRA-935R Instrukcja

12 Stycznia 2025

Boss DD-500 Instrukcja

12 Stycznia 2025