Instrukcja obsługi Kenwood DPF-1030


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood DPF-1030 (24 stron) w kategorii odtwarzacz CD. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
CD PLAYER
B60-4517-08 (EN)
INSTRUCTION MANUAL
KENWOOD CORPORATION
DPF-1030
DPF-2030
2
Before applying power
Caution : Read this section carefully to ensure safe operation.
Units are designed for operation as follows.
Australia ..................................................................................AC 240 V only
Europe and U.K. .....................................................................AC 230 V only
*Other countries ............................ AC 110-120 / 220-240 V switchable
The marking is located on the rear panel and says that the compo-
nent uses laser beams that have been classified as Class 1. It means
that the unit is utilizing laser beams that are of a weaker class. There
is no danger of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
The marking of products using lasers
(Except for some areas)
Introduction
*AC voltage selection
The AC voltage selector switch on the rear panel is set to the voltage that
prevails in the area to which the unit is shipped. Before connecting the
power cord to your AC outlet, make sure that the setting position of this
switch matches your line voltage. If not, it must be set to your voltage in
accordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line volt-
age due to improper setting of the AC voltage selector switch.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Safety precautions
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCTS ENCLOSURE
THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Caution : Read this section carefully to ensure safe operation.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
AC voltage selector switch
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC 110 – 120V
AC 220 – 240V
CAUTION
RI S K O F E L E C TR I C S HO CK
DO N O T O P E N
3
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to
you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for
shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Accessories
Audio cord ........................ (1) System control cord ............ (1)
Remote control unit ......... (1) Batteries (R6/AA) .............. (2)
AC plug adaptor .............. (1)
Use to adapt the plug on the power cord
to the shape of the wall outlet.
(Accessory only for regions where use is
necessary.)
CD peak search for setting the recording level that does not cause distortion. (
Edit function for rearranging tracks according to the tape length so that no music is interrupted
in the middle. *
Auto space function. %
Easy operation functions allow systematic operation with other KENWOOD components
connected through the system control connection. 8
Special features
Convenient features for dubbing CD onto tape
Easy operation functions
Contents
Programmed play (PGM mode)................................ 14
To check or change the programmed tracks .................. 15
To add a track to the program ......................................... 15
To clear tracks from the program .................................... 15
Repeated playback .................................................... 16
To repeat only the programmed tracks ........................... 16
To repeat the entire disc ................................................... 17
Editing ......................................................................... 18
Playing or recording the edited contents ....................... 18
To check the edited contents ........................................... 19
To clear the edited contents ............................................. 19
Peak search ........................................................................ 19
Playback in random order (Random playback) ....... 20
Timer operations........................................................ 21
In case of difficulty ..................................................... 22
Specifications ............................................................. 23
Introduction .................................................................. 2
Before applying power ................................................ 2
Safety precautions....................................................... 2
Special features ................................................................... 3
IMPORTANT SAFEGUARDS ........................................ 4
System connections .................................................... 6
To use the headphone ......................................................... 7
Maintenance ................................................................. 9
Controls and indicators ............................................. 10
Operation of remote control unit ............................. 11
Normal play (TRACK mode)...................................... 12
Playing tracks in order from track No.1 .......................... 12
Playback from desired track ............................................. 13
Skipping tracks .................................................................. 13
Searching ........................................................................... 13
Time display on CD player (TIME DISPLAY) .................... 13
Caution: Read the pages marked carefully to ensure safe operation.
(DPF-2030 only) (DPF-2030 only)
REMOTE CONTROL UNIT RC-P0715
Introduction


Specyfikacje produktu

Marka: Kenwood
Kategoria: odtwarzacz CD
Model: DPF-1030

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kenwood DPF-1030, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odtwarzacz CD Kenwood

Instrukcje odtwarzacz CD

Najnowsze instrukcje dla odtwarzacz CD

Tascam

Tascam CD-A700 Instrukcja

7 Października 2024
Ideen Welt

Ideen Welt K 1216 N Instrukcja

28 Września 2024
Tascam

Tascam CD-RW901MKII Instrukcja

28 Września 2024
Tascam

Tascam CD-200iB Instrukcja

28 Września 2024
Tascam

Tascam cdrw900 Instrukcja

28 Września 2024
Tascam

Tascam CD-RW900MKII Instrukcja

28 Września 2024
Quadral

Quadral Aurum C8 Instrukcja

27 Września 2024
Elta

Elta 5786 Instrukcja

27 Września 2024
Audiolab

Audiolab 8200CDQ Instrukcja

27 Września 2024
Mx Onda

Mx Onda MXDM114 Instrukcja

26 Września 2024