Instrukcja obsługi Kaco blueplanet 3.7 NX1 M2

Kaco Ładowarka baterii blueplanet 3.7 NX1 M2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kaco blueplanet 3.7 NX1 M2 (69 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/69

These instructions form part of the product and must be observed. They are available online on our website and correspond to the current

hardware version. The copyright for this documentation is held solely by KACO new energy GmbH.

Manual

English translation of German original

Authorised electrician

Important safety instructions

Android APP iOS APP Installation video

3.0-5.0 NX1

Start- up video via APP

KACO blueplanet 3.0 NX1 M2

KACO blueplanet 3.7 NX1 M2

KACO blueplanet 4.0 NX1 M2

KACO blueplanet 5.0 NX1 M2

Legal provisions

The information contained in this document is the property of KACO new energy GmbH. Publication, in whole or in part,

requires the written permission of KACO new energy GmbH.

KACO warranty

You can download the current warranty conditions from the Downloads folder on our website at http://www.kaco-

newenergy.com.

Definitions on product designations

In this manual, the product “Photovoltaic feed- in inverter” is referred to as the device for ease of reading.

Trademarks

All trademarks are recognised, even if not explicitly identified as such. A lack of identification does not mean that a product

or designation/logo is free of trademarks.

Software

This device contains open source software developed by third parties and in some cases licensed under GPL and/or LGPL.

More details on this topic and a list of the open source software used, as well as the corresponding licence texts, can be

found on the associated “KACO NX Setup” APP in the “Info” menu under “Imprint”, “Wi-Fi Stick Licences” and “Mobile APP

Licences”.

Photovoltaic feed in inverter-

Table of contents

1 General information ........................................ 1

1.1 Notes regarding this document .......................... 1

1.2 More information ............................................... 1

1.3 Layout of Instructions ......................................... 1

1.4 Target group ....................................................... 2

1.5 Marking .............................................................. 3

2 Safety .............................................................. 4

2.1 Intended use 4......................................................

2.2 Protection features 5............................................

3 Description of the device ................................. 6

3.1 Mode of operation ............................................. 6

3.2 System layout ..................................................... 6

4 Technical data ................................................. 7

4.1 Electrical data ..................................................... 7

4.2 General data ....................................................... 8

4.3 Environmental data ............................................ 8

4.4 Accessories ......................................................... 8

5 Transportation and Delivery ............................ 9

5.1 Scope of delivery ................................................ 9

5.2 Transporting the device 9.....................................

5.3 Installation tool .................................................. 9

6 Assembly and preparation ............................. 10

6.1 Choosing the installation location .................... 10

6.2 Unpacking the device ....................................... 11

6.3 Fastening the mount ........................................ 12

6.4 Installing and securing the device .................... 13

7 Installation .................................................... 14

7.1 General information ......................................... 14

7.2 Surveying the connection area ......................... 14

7.3 Making the electrical connection ..................... 15

7.4 Connecting the device to the power grid ......... 15

7.5 Connecting the PV generator to the device ..... 17

7.6 Creating equipotential bonding ....................... 20

7.7 Connecting the interfaces ................................ 20

7.8 Connecting the Smart- -Meter for dynamic feed in

.......................................................................... 21

8 Commissioning .............................................. 23

8.1 Requirements ................................................... 23

8.2 Preconditions relating to standards ................. 23

9 Configuration and operation ......................... 24

9.1 Start condition .................................................. 24

9.2 Initial start- up................................................... 24

9.3 A uthorisation.................................................... 25

9.4 Operating system and system configuration.... 26

9.5 Signal elements ................................................ 27

9.6 Connecting to the device .................................. 28

9.7 Menu of the Communication unit .................... 31

9.8 Additional functions ......................................... 34

9.9 Menu of Inverter .............................................. 37

9.10 Operation mode ............................................... 38

9.11 Enabling functions ............................................ 39

9.12 Performing a firmware update ......................... 49

9.13 Monitoring with “blueplanet web” .................. 51

9.14 Monitoring the device ...................................... 52

9.15 Active power control with a Smart-Meter ....... 52

9.16 in Information on dynamic feed- ...................... 52

10 Maintenance and troubleshooting ................ 55

10.1 Visual inspection............................................... 55

10.2 Cleaning ............................................................ 55

10.3 Shutting down for maintenance work /

troubleshooting ................................................ 56

10.4 Troubleshooting ............................................... 57

10.5 Error code ......................................................... 57

10.6 Fault during connection set-up and search ...... 60

10.7 Disconnecting connections ............................... 61

11 Decommissioning and dismantling ................ 62

11.1 Switching off the device ................................... 62

11.2 Uninstalling the device ..................................... 62

11.3 Disassembling the device ................................. 63

11.4 Packaging the device ........................................ 63

11.5 Storing the device ............................................. 63

12 Disposal ......................................................... 63

13 Service and warranty ..................................... 63

14 Appendix ....................................................... 64

14.1 EU Declaration of Conformity .......................... 64

Specyfikacje produktu

Marka:	Kaco
Kategoria:	Ładowarka baterii
Model:	blueplanet 3.7 NX1 M2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kaco blueplanet 3.7 NX1 M2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Ładowarka baterii Kaco

Kaco blueplanet 15.0 NX3 M2 Instrukcja

2 Października 2024

Kaco blueplanet 3.0 NX3 M2 Instrukcja

2 Października 2024

Kaco blueplanet 8.0 NX3 M2 Instrukcja

2 Października 2024

Kaco blueplanet 20.0 NX3 M2 Instrukcja

2 Października 2024

Kaco blueplanet 3.7 NX1 M2 Instrukcja

2 Października 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

MSW S-CHARGER-20A.2 Instrukcja

15 Października 2024

MSW S-CHARGER-10A.2 Instrukcja

15 Października 2024

Intenso Powerbank 10400 Instrukcja

14 Października 2024

Gembird CHM-03 Instrukcja

10 Października 2024

Kostal IQ 8.5 Instrukcja

9 Października 2024

Venom VS5007 Instrukcja

9 Października 2024

Venom VS5010 Instrukcja

9 Października 2024

Venom VS2891 Instrukcja

9 Października 2024

Venom VS2881 Instrukcja

9 Października 2024

Venom VS2883 Instrukcja

9 Października 2024