Instrukcja obsługi JVC RX-7042S

JVC odbiornik RX-7042S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC RX-7042S (52 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/52
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1170-001B
[J]
RX-7040B/RX-7042S
AUDIO/VIDEO CONTROL RECEIVER
INSTRUCTIONS
G-1
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le
coffret de l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
Warnings, Cautions and Others/
Mises en garde, précautions et indications diverses
Caution–– STANDBY/ON button!
Disconnect the mains plug to shut the power off completely. The
STANDBY/ON button in any position does not disconnect
the mains line. The power can be remote controlled.
Attention––Commutateur STANDBY/ON!
Déconnecter la fiche de secteur pour couper complètement le
courant. Le commutateur STANDBY/ON ne coupe jamais
complètement la ligne de secteur, quelle que soit sa position. Le
courant peut être télécommandé.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Section 820-40 of the NEC which provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
For Canada/pour Le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPA-
RATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,”
ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS
NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME
SUR LE MATERIEL BROUILLEUR; “APPAREILS NUMERIQUES”,
NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For U.S.A
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1
Table of Contents
Basic Settings........................................... 21
Quick Speaker Setup ................................................................ 21
Basic Setting Items ................................................................... 22
Basic Procedure ........................................................................ 23
Setting the speakers ........................................................... 23
Setting the speaker distance ............................................... 24
Setting the bass sounds ...................................................... 24
Selecting the main or sub channel ..................................... 25
Setting for easy and effective surround operations ............ 25
Setting the digital input terminals ...................................... 25
Setting the component video input .................................... 26
Memorizing the volume level for each source ................... 26
Adjusting Sound ........................................ 27
Basic Adjustment Items............................................................ 27
Basic Procedure ........................................................................ 27
Adjusting the equalization patterns.................................... 28
Adjusting the speaker output levels ................................... 28
Adjusting the sound parameters
for the surround and DSP modes ................................. 28
Using the Surround Modes ..........................
30
Reproducing Theater Ambience ................................................ 30
Introducing the Surround Modes ............................................. 30
Surround Modes Applicable to the Various Software .............. 32
Activating the Surround Modes ............................................... 33
7 Activating the EX/ES setting ............................................ 33
7 Activating the surround modes automatically .................. 33
7 Activating the surround modes manually ......................... 33
Using the DSP Modes ................................ 34
Reproducing the Sound Field ................................................... 34
Introducing the DSP Modes ..................................................... 34
Activating the DSP Modes ....................................................... 35
Using the DVD MULTI Playback Mode .......... 36
Activating the DVD MULTI Playback Mode .......................... 36
COMPU LINK Remote Control System ......... 37
AV COMPU LINK Remote Control System .... 38
Operating JVC’s Audio/Video Components ... 40
Operating Audio Components .................................................. 40
Operating Video Components .................................................. 41
Operating Other Manufacturers’
Video Equipment.................................... 42
Troubleshooting ......................................... 45
Specifications............................................ 46
Introduction ................................................ 2
Features ...................................................................................... 2
Precautions ................................................................................. 2
Parts Identification ...................................... 3
Getting Started ........................................... 6
Checking the Supplied Accessories ........................................... 6
Putting Batteries in the Remote Control .................................... 6
Connecting the FM and AM Antennas ....................................... 6
Connecting the Speakers and Subwoofer ................................... 7
Connecting Audio/Video Components ....................................... 9
7 Analog connections ............................................................ 9
7 Digital connections ........................................................... 12
Connecting the Power Cord ..................................................... 12
Basic Operations ....................................... 13
Daily Operational Procedure .................................................... 13
Turning On the Power .............................................................. 13
Selecting the Source to Play ..................................................... 13
Adjusting the Volume ............................................................... 14
Selecting the Front Speakers .................................................... 15
Turning On and Off the Subwoofer Sound .............................. 15
Selecting the Analog or Digital Input Mode ............................ 15
Setting the Dynamic Range ...................................................... 16
Attenuating the Input Signal .................................................... 16
Turning Analog Direct On and Off .......................................... 17
Making Sounds Natural ............................................................ 17
Changing the Source Name ...................................................... 17
Reinforcing the Bass ................................................................ 18
Muting the Sound ..................................................................... 18
Changing the Display Brightness ............................................. 18
Using the Sleep Timer .............................................................. 18
Receiving Radio Broadcasts ........................ 19
Tuning in to Stations Manually ................................................ 19
Using Preset Tuning ................................................................. 19
Selecting the FM Reception Mode ........................................... 20
This mark indicates that ONLY the remote control
CAN be used for the operation explained.
Remote
NOT
This mark indicates that the remote control
CANNOT be used for the operation explained.
Use the buttons and controls on the front panel.

Specyfikacje produktu

Marka: JVC
Kategoria: odbiornik
Model: RX-7042S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JVC RX-7042S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik JVC

JVC

JVC KD-XD28BT Instrukcja

8 Października 2024
JVC

JVC KS-DR2004D Instrukcja

3 Września 2024
JVC

JVC KD-X282DBT Instrukcja

1 Września 2024
JVC

JVC KS-DR1004D Instrukcja

1 Września 2024
JVC

JVC KW-M75BT Instrukcja

30 Sierpnia 2024
JVC

JVC KW-X850BT Instrukcja

29 Sierpnia 2024
JVC

JVC KD-X482DBT Instrukcja

29 Sierpnia 2024
JVC

JVC KD-X282BT Instrukcja

28 Sierpnia 2024
JVC

JVC KD-X355 Instrukcja

28 Sierpnia 2024
JVC

JVC KS-DR2001D Instrukcja

25 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025