Instrukcja obsługi JUNG DABCD

JUNG monitor DABCD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG DABCD (8 stron) w kategorii monitor. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Smart Radio DAB+ and Smart Radio DAB+ Bluetooth
05.03.20211 / 80024075203
Smart Radio DAB+
Ref.-no.: DAB ..
Smart Radio DAB+ Bluetooth
Ref.-no.: DAB .. BT ..
Operating instructions
1 Safety instructions
Electrical equipment may only be tted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Read and observe instructions fully.
Danger of electric shock. Before working on the device, disconnect the mains voltage and switch o󰀨 the
circuit breakers.
These instructions are a component part of the product and must remain with the end customer.
2 Correct use
- DAB reception in the frequency range 174 MHz to 240 MHz (VHF band III and channel 13)
- FM reception in the frequency range 87.5 MHz to 108 MHz (VHF band II)
- Installation in ush box according to DIN 49073 (recommendation: deep box)
3 Product characteristics
- Digital radio with display and sensor buttons
- Real glass front panel
- Stereo reception
- Connection terminals for two loudspeakers
- Stereo/mono switch-over
- Simple operation
- Integrated antenna for DAB+ and FM
- High reception quality
- Automatic station scan
- Storage of 8 favourites DAB+ and 8 favourites FM (will be retained after voltage failure)
- Switch-on with last station
- Switch-on with last volume
- Switch-on with last operation mode (DAB+ or FM)
- Display of station information, time and current settings
- Current time via RDS and DAB+
- Brightness level of display can be adjusted
- Night mode
- Alarm function
- Sleep mode
- Switching on/o󰀨 via extension unit
- Line-out output (AUX) to connect external ampliers
- Optional external cable antenna ref.-no.: RAD-ANT
Only version with Bluetooth
- Playback and control of music on mobile devices via Bluetooth
- Storage of 8 Bluetooth audio sources
- Bluetooth device name can be changed
GB
Smart Radio DAB+ and Smart Radio DAB+ Bluetooth
05.03.20212 / 80024075203
4 Structure of the device
1. Power supply
2. Frame
3. Display
4. next/previous channel/title
loud/quiet, brighter/darker
5. Button On/O󰀨
6. Conrm/apply button
7. Button Selection DAB+, FM, Bluetooth, Alarm, Settings, Return without saving
8. Favourites button
12
3
4
5
6
7
8
Fig. 1: Structure of the device
5 Operation
Switch on/o󰀨
Press button
Radio switches on/o󰀨
Menu
Press button.
Select functions with buttons: DAB RADIO, FM RADIO, BLUETOOTH, ALARM, SETTINGS
Selection with button.
SETTINGS submenu:
SLEEP, TIME, DISPLAY, BT-NAME
Selection with button.
DAB RADIO/FM RADIO
During commissioning, all reachable channels are saved. The next/previous channel is selected using the
buttons.
The choice between DAB RADIO and FM RADIO is made using the menu
.
Saving favourites
During commissioning, the 8 strongest channels are saved as favourites.
The favourites can be customised individually.
Selecting channels
Press button longer.
Select favourite 1-8 using button
Press button.
Channel is saved on the selected favourite.
Smart Radio DAB+ and Smart Radio DAB+ Bluetooth
05.03.20213 / 80024075203
Retrieving favourites
Press button briey.
Select favourite 1-8 using button .
The respective channel is displayed and played.
Conrm channel using button
Channel search
Press button for 3 seconds
Display shows “New Scan”
Conrm scan using button
Night mode
In night mode the display can be hidden if the radio is switched o󰀨. After pressing any button, the display becomes
visible for approx. 10 seconds.
Requirement: For activating the night mode the radio has to be switched o󰀨.
Select the lowest brightness level using button.
Press again to de/activate night mode.
SLEEP
The radio switches o󰀨 after a predetermined time. The OFF setting deactivates the function.
Hold down button for 3 seconds.
Set (OFF, 15 min, 30 min) using buttons
Conrm button
Setting time
The time is transferred from favourite 1 via DAB+ or FM. If the time is not transferred via DAB+ or FM, it must be set
manually.
Press button.
Select SETTINGS and then TIME using
button.
Conrm button
Set time using
buttons.
Conrm button
Alarm time/alarm function
The last radio channel is selected as alarm sound. The volume increases gently.
Setting alarm time:
Requirement: The radio is switched o󰀨.
Press button for approx. 4 sec
Setting alarm time using buttons
Press button
Alarm time is set.
Alarm function is active
Switching alarm function on/o󰀨:
Requirement: The radio is switched o󰀨.
Press button for approx. 2 sec.
ALARM ON or ALARM OFF is displayed briey.
Activated alarm time appears in the upper right-hand corner of the display.


Specyfikacje produktu

Marka: JUNG
Kategoria: monitor
Model: DABCD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JUNG DABCD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor JUNG

JUNG

JUNG DABCD Instrukcja

23 Września 2024
JUNG

JUNG BTCCD-DISP Instrukcja

8 Września 2024
JUNG

JUNG DABA-DISP Instrukcja

1 Września 2024
JUNG

JUNG DABLS Instrukcja

24 Sierpnia 2024
JUNG

JUNG BTCLS-DISP Instrukcja

18 Sierpnia 2024
JUNG

JUNG BTCA-DISP Instrukcja

15 Sierpnia 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025