Instrukcja obsługi JRC Radar 1500 MKII

JRC Radar statku Radar 1500 MKII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JRC Radar 1500 MKII (50 stron) w kategorii Radar statku. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/50
I
Thank you for purchasing the RADAR 1500 MK@ LCD radar. This
product will provide many years of trouble free use when operated
properly, so it is important that you read and observe the precau-
tions below.
Read this manual thoroughly to gain a good understanding of the capabili-
ties and the requirements of this equipment.
Store the manual in a safe location so, that it does not become lost or dam-
aged.
Observe standard storage and handling procedures for electronic equipment.
If, after proper installation, RADAR 1500 MK2 appears to be defective,
please contact your JRC sales or service representative for assistance.
Symbols Used In This Manual
The following symbols are used in this instruction manual and on the product
itself to ensure correct handling and proper use. Their meanings are explained
below. Please observe the advice and precautions emphasised by the symbols
as you read the manual and as you install and use the equipment.
Electric shocks
Prohibition
Prohibits
disassembly
Instruction
This symbol warns of the possibility of electrical and/or other related dangers.
The accompanying instructions should be meticulously followed.
This sign alerts the reader to actions which must NEVER be performed.
This sign prohibits disassembly, or otherwise tampering with the indicated com-
ponents.
This draws the readers attention to instructions which must be very exactly
followed.
A safety warning to alert you of possible physical harm to
yourself, or to the equipment.
An alert to possible harm to, or failure of the equipment.
II
Operating Precautions
To avoid electrical shock, never touch the inside of the scanner when
it is connected to an electrical supply.
Always keep the protective cover on the scanner when it is connected
to an electrical supply. High internal voltages can cause serious per-
sonal injury. The equipment should be routinely serviced, only by JRC
authorised personnel.
Avoid passing close to the scanner when the radar is in use.
The scanner unit rotates quickly and can cause personal injury. Both
this and the enclosed radome should be installed at a high place, such
as a cabin roof, or a specially constructed arch, or radar mast. If the
radiating units cannot be installed above all possible, standing head
height, they should be guarded by a strong, protective, enclosing frame.
Prolonged, close range exposure to radar signals is not recommended.
Before approaching close to the scanner, or dismounting it, ensure
that the STBY/OFF and the X-MIT/OFF keys on the display unit have
both been turned off. The cable connector P1 at the rear of the display
unit should be disconnected before removing the scanner unit from its
installed position.
Never sit on the scanner, nor otherwise subject them to weight. They
are not intended to bear loads and ignoring this advice could cause
damage to important internal components.
You will only get optimum performance from your RADAR 1500
MK2 by carefully following this manuals instructions. Incorrect op-
eration reduces the performance level and could cause damage to the
equipment.
Remember that radar is only an aid to navigation and can be affected
by many physical, environmental and operational factors. Radar does
not diminish the users responsibility to keep a good look out at all
times and to exercise all other navigational prudence and human judge-
ment. Radar is not a substitute for human faculties.
WARNING
CAUTION


Specyfikacje produktu

Marka: JRC
Kategoria: Radar statku
Model: Radar 1500 MKII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JRC Radar 1500 MKII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radar statku JRC

JRC

JRC Radar 1500 MKII Instrukcja

8 Października 2024
JRC

JRC Radar 2000 Instrukcja

8 Października 2024
JRC

JRC LMS-520C Instrukcja

25 Września 2024
JRC

JRC Radar1800 Instrukcja

13 Września 2024
JRC

JRC JMA2343 Instrukcja

12 Września 2024
JRC

JRC JMA9922_6XA Instrukcja

11 Września 2024
JRC

JRC JMA9922_9XA Instrukcja

10 Września 2024

Instrukcje Radar statku

Najnowsze instrukcje dla Radar statku

Simrad

Simrad SP90 Instrukcja

8 Października 2024
Simrad

Simrad ER60 Instrukcja

8 Października 2024
Simrad

Simrad SL35 Instrukcja

4 Października 2024
Furuno

Furuno FR8062 Instrukcja

23 Września 2024
Furuno

Furuno FR8252 Instrukcja

22 Września 2024
Raymarine

Raymarine R41XX Instrukcja

21 Września 2024
Lowrance

Lowrance LCX26C Instrukcja

20 Września 2024
Furuno

Furuno FR1500MK3 Instrukcja

16 Września 2024
Furuno

Furuno 1753C Instrukcja

13 Września 2024