Instrukcja obsługi Joy-It SBC-PoE-Power

Joy-It Niesklasyfikowane SBC-PoE-Power

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It SBC-PoE-Power (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
ISOLATED POWER-OVER-ETHERNET
SPLITTER
SBC-PoE-Power & SBC-PoE-Power-C
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
1. General Information
2. Requirements
3. Connection & Usage
4. Information & take-back obligations
5. Support
TABLE OF CONTENTS
Dear Customer,
thank you for choosing our product. In the following, we will guide you
through what to pay attention to during commissioning and use.
If you encounter any unexpected problems during use, please feel free to
contact us.
To be able to draw power via the network connection, additional power
must be fed into the network line. This can be realized, for example, via a
Power Over Ethernet network switch or an injector. These devices feed the
power into the network line themselves.
Now connect the PoE splitter to your network cable, which is connected
to your router or a switch in your network. The network connector, as well
as the Micro-USB or USB-C output (depending on the version of your PoE
splitter), can now be connected to your end device.
Please note that the splitter outputs a voltage of 5V and is suitable for
an output current of up to 2A. Before use, make sure that your device is
compatible with these values.
1. GENERAL INFORMATION
2. REQUIREMENTS
3. CONNECTION & USAGE
Attention! The device is suitable for network speeds up to 100 Mbps. For
higher network speeds, you must limit the speed of your Raspberry Pi to
100 Mbps using the following command:
sudo nano ▬etc▬rc1local
sudo nano ▬etc▬rc1local
sudo nano ▬etc▬rc1local
sudo nano ▬etc▬rc1localsudo nano ▬etc▬rc1local
Insert the following line before the line with the content 'exit 0':
sudo ▬sbin▬ethtool ‘s ethө advertise өxөөӏ ӧ
sudo ▬sbin▬ethtool ‘s ethө advertise өxөөӏ ӧ
sudo ▬sbin▬ethtool ‘s ethө advertise өxөөӏ ӧ
sudo ▬sbin▬ethtool ‘s ethө advertise өxөөӏ ӧsudo ▬sbin▬ethtool ‘s ethө advertise өxөөӏ ӧ


Specyfikacje produktu

Marka: Joy-It
Kategoria: Niesklasyfikowane
Model: SBC-PoE-Power

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It SBC-PoE-Power, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Joy-It

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025