Instrukcja obsługi Joy-It RB-Proto+


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It RB-Proto+ (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Joy IT powered by SIMAC Electronics GmbH Pascalstr. 8 47506 Neukirchen Vluyn www.joy it.net- - - - - -
RB-PROTO+
Prototype expansion board for plugging directly onto the
Pi
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. CONNECTING THE PROTO+
To use the Proto+ prototype expansion board, simply plug it into the 40-
pin connector strip of your Raspberry Pi and attach it using the supplied
mounting material, as shown in the picture below.
3. PIN DECLARATION
In this section, we briefly explain the functions of the individual pins.
GPIO: 14 available GPIO pins are accessible and freely usable via corres-
ponding pins and screw terminals. Each connection is labeled with the
GPIO number of the connected pin.
5V/3.3V: The pins for 5 V and 3.3 V of the Raspberry Pi are brought out
together with the GND pins on these pins and screw terminals.
UART: UART communication is enabled via the TXD (GPIO 14) and RXD
(GPIO 15) pins, which are available on these pins and screw terminals.
I2C: For I2C communication, the SDA (GPIO 2) and SCL (GPIO 3) pins are
available on these pins and screw terminals.
SPI: SPI communication uses the pins MISO (GPIO 9), MOSI (GPIO 10),
SCLK (GPIO 11), CE0 (GPIO 8) and CE1 (GPIO 7), which are available on
these pins and screw terminals.
SOIC16: This area allows ICs with up to 16 legs to be soldered or plugged
directly onto the board.
Breadboard: This area oers the possibility to solder cables to build your
own circuits.


Specyfikacje produktu

Marka: Joy-It
Kategoria: Niesklasyfikowane
Model: RB-Proto+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It RB-Proto+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Joy-It

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025