Instrukcja obsługi Joy-It Robot03


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It Robot03 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
ROBOT CAR KIT
Robot03
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
The Robot Car Kit (article no.: Robot03) is a kit that can be used as a basic
framework for a car / robot. You have to add further components your-
self, such as a power supply (accumulator, batteries) and a controller,
e.g. an Arduino with motor controller. We recommend the use of JOY-iT
accessories.
The base plate already contains the holes for mounting an Arduino.
The motors are designed for a voltage of 3 9 V DC (4.5V recommended).-
NOTE: All illustrations are exemplary and do not have to be identical
with the items delivered.
Voltage DC V 4,5 6 7,2 9
Idle current mA 190 160 180 200
Idle rpm + -10% 90 190 230 300
Torque gf/cm min. 800 800 1000 1200
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. OVERVIEW
Base plate (2x)
Engine Mounting (8x)
DC Motor (4x)
Tyres (4x)
Perforated disc (4x)
Spacer (6x)
Screw 3x30 (6x)
Screw 3x8 (6x)
M4 Nut (8x)
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3. ASSEMBLY
Attention! We recommend to install the supply lines for the motors before mounting the car.
Remove the protective film from all compo-
nents and insert the motor holders into the
base plate.
The axle hole of the perforated wheel has a
wide and a narrow side. The wide side
should point towards the engine.
Place the perforated disc on the motor and
position the motors on the base plate (the
connections/cables must point outwards).


Specyfikacje produktu

Marka: Joy-It
Kategoria: nieskategoryzowany
Model: Robot03

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It Robot03, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Joy-It

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024