Instrukcja obsługi Joy-It RB-JoyPi-Addon

Joy-It Niesklasyfikowane RB-JoyPi-Addon

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It RB-JoyPi-Addon (15 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/15
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
JOYPI EXPANSION KIT
RB-JoyPi Addon-
1. GENERAL INFORMATION
Dear Customer,
thank you for choosing our product. In the below, we will show you what
you need to know about commissioning and use of the product.
If you encounter any unexpected problems during use, please feel free to
contact us.
These instructions only refer to the expansion pack for the JoyPi. If you
have any questions about the basic functions of the JoyPi, you can down-
load the main JoyPi manual .here
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. ASSEMBLY
First, screw the spacers to the port doubler as seen in the picture below.
Your Raspberry Pi should already be screwed into the JoyPi.
Now you can plug the port doubler onto the Raspberry Pi.
The port doubler is not screwed to the Raspberry Pi, because
the port doubler has to be removed again when you want to
close the JoyPi.
Finally, you only need to connect the GPIO strip of the JoyPi, with the
GPIO strip of the port doubler with the supplied cable.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3. INSTALLATION
For the commissioning of the ADC and the pressure and temperature sen-
sor, it is necessary to install the corresponding libraries.
In our prepared image, which you can download , they are already here
installed. If you use your own image, you can install the libraries with the
following commands.
adafruit/Adafruit_CircuitPython_ADS1x15
adafruit/Adafruit_CircuitPython_BMP280
The sample scripts we prepared, are also already present on the image.
You can also download the script directory manually , or save it to here
your desktop with the following commands:
Also, if you are using your own image, you need to enable I2C. To do this,
enter the following command in the terminal:
Now go to 3Interfacing Options I5 I2Cand enable .
sudo pip3 install adafruit circuitpython ads1x15- -
sudo apt get install python3 smbus i2c- - -tools - y
cd Desktop/
wget https://joy pi.net/files/files/downloads/joypi/Joy Pi.zip- -
sudo raspi config-
unzip Joy Pi.zip-
sudo pip3 install adafruit circuitpython bmp280- -


Specyfikacje produktu

Marka: Joy-It
Kategoria: Niesklasyfikowane
Model: RB-JoyPi-Addon

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It RB-JoyPi-Addon, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Joy-It

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025