Instrukcja obsługi Joy-It COM-ZY12PDN-USB

Joy-It Niesklasyfikowane COM-ZY12PDN-USB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It COM-ZY12PDN-USB (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
USB PD TRIGGER MODULE-
COM ZY12PDN, COM- -ZY12PDN-ST and COM ZY12PDN- -USB
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
All three items have the same circuit board and dier only in the output
interface.
When using the modules, make sure to use a suicient cable
cross section.-
To use the modules as intended, you need a USB-PD-capable power
supply unit.
2. OUTPUT INTERFACES
COM ZY12PDN-
COM ZY12PDN- -ST
-
+
COM ZY12PDN USB- -
-
+
3. OPERATION
Connect your USB PD trigger module to a USB PD capable power supply - -
using the USB C connector. These modules provide you with dierent -
voltage modes, which are indicated by the LED. The mode can be
changed by pressing the button.
Colour Voltage modes
5 V
9 V
12 V
15 V
20 V
Maximum possible voltage
Runs through all modes
(one per second)
To set the modes as default, first plug the board into your power supply
while holding down the button on the board. Now the LED will start
flashing colourfully. Now you can select the desired mode using the
button. Now press and hold the button to confirm your selection. Finally,
disconnect the power supply from the module and then reconnect it so
that the module now starts directly in this mode.


Specyfikacje produktu

Marka: Joy-It
Kategoria: Niesklasyfikowane
Model: COM-ZY12PDN-USB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It COM-ZY12PDN-USB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Joy-It

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025