Instrukcja obsługi Joy-It ARD-RS232


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It ARD-RS232 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Joy IT powered by SIMAC Electronics GmbH Pascalstr. 8 47506 Neukirchen Vluyn www.joy it.net- - - - - -
RS232 SHIELD-
ARD RS232-
RS232 SHIELD-
ARD-RS232
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. PINOUT
The jumpers on the board can be used to set the pins with which the
board is used. By default these are set to RX > D0 and TX - -> D1.
All other pins can be used normally via the pin headers.
The pin assignment of the D Sub connector can be seen in the diagram -
below. The TX, RX and G pins must always be connected for use.
TX: transmit line; RX: receive line; G: reference potential


Specyfikacje produktu

Marka: Joy-It
Kategoria: Niesklasyfikowane
Model: ARD-RS232

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It ARD-RS232, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Joy-It

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025