Instrukcja obsługi Jonsered CS2250

Jonsered Maszyna do piłowania CS2250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jonsered CS2250 (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/44
English
CS 2245
CS 2245S
CS 2250S
Operator
’s manual
Please read the oper
ator’s manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Both of the operator
′
s hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine bef
ore
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order
to prevent unintentional
starting, the spark plug cap
must be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil
flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 19
Fuelling ................................................................. 20
Fuel safety ............................................................ 20
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 21
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 23
General working instructions ................................ 23
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 31
Muffler .................................................................. 33
Starter .................................................................. 34
Air filter ................................................................. 35
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Cooling system ..................................................... 36
”Turbo Air Cleaning” centrifugal cleaning .............. 37
Winter use ............................................................ 37
Maintenance schedule ......................................... 38
TECHNICAL D
ATA
T
echnical data ...................................................... 39
Bar and chain combinations ................................. 40
Saw chain filing and file gauges ........................... 40
EC-declaration of conformity ................................ 41

Specyfikacje produktu

Marka: Jonsered
Kategoria: Maszyna do piłowania
Model: CS2250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jonsered CS2250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Jonsered

Jonsered

Jonsered CS 2245 Instrukcja

27 Września 2024
Jonsered

Jonsered CS16i Instrukcja

27 Września 2024
Jonsered

Jonsered CS2250 Instrukcja

27 Września 2024
Jonsered

Jonsered CS 2255 Instrukcja

27 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024