Instrukcja obsługi JLab Studio

JLab zestaw słuchawkowy Studio

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JLab Studio (2 stron) w kategorii zestaw słuchawkowy. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

STUDIO WIRELESS

HEADPHONES

FIRST TIME SETUP: BLUETOOTH PAIRING

Notes:

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.

The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).

• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.

Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.

• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

ect “JLab Studio” in your

vice settings to connect.

When the headphones

are paired, voice prompts

“You are connected” and

blue light will flash slowly.

Bluetooth

JLab Studio

Settings

Turn on the Bluetooth

in your device settings.

Bluetooth

Settings

1When the Studio Wireless

Headphones are powered

off, press and hold the

Power Button for

approximately

8 seconds.

Fast blinking

red and blue

light indicates

searching for

Bluetooth device.

PAIRING NEW / ADDITIONAL DEVICES:

Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.

Repeat process for new devices.

FIRST TIME STEUP

We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

YOUR WARRANTY

All warranty claims are subject to JLab Audio

authorization and at our sole discretion. Retain your

proof of purchase to ensure warranty coverage.

Reach out to us at support@jlabaudio.com

or visit jlabaudio.com/contact

jlabaudio.com/register

Product updates How-to tips|

FAQs & more

JLABAUDIO.COM

CHARGING

Note: For optimum performance, charge overnight with Micro

USB cable prior to using. Allow about 3 hours to fully charge.

Connect the Micro USB (included) to the headphone and connect

the USB into a computer or AC adaptor (not included). Make sure

the USB connection has a power output source.

Solid red light indicates the headphone is charging.

Solid blue light indicates charging is complete.

Note: Studio Bluetooth can still be used while charging.

Power on and connect to device after charging occurs.

BUTTON FUNCTIONS

FULLY

CHARGED

CHARGING

POWER ON OFF:/

Click & hold 2+ seconds

PLAY PAUSE ANSWER / / /

HANG UP CALLS: Click once

REJECT INCOMING CALL:

Click & hold 1 second

ACTIVATE SIRI (iOS) OR

“OK GOOGLE” (ANDROID):

Click twice

BLUETOOTH PAIRING:

See FIRST TIME SETUP

VOLUME UP: Click once

TRACK FORWARD:

Click & hold 2+ seconds CHANGE EQ:

Press both buttons simultaneously

(Studio will cycle 3 EQ settings)

VOLUME DOWN: Click once

TRACK BACKWARD:

Click & hold 2+ seconds JLab SIGNATURE

(One Beep)

JLab C3™ signature sound

with amplified vocals and bass

BALANCED

(Two Beeps)

Even sound with no additional

sound enhancements

BASS BOOST

(Three Beeps)

Amplified bass and sub-bass

CAUTIONS

• Avoid getting moisture or liquids on the headphone cups.

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.

• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to

improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products Product alerts Burn-in your headphones| |

JLab Audio + Burn-in Tool

Specyfikacje produktu

Marka:	JLab
Kategoria:	zestaw słuchawkowy
Model:	Studio
Kolor produktu:	Czarny
Typ produktu:	Zestaw słuchawkowy
Waga produktu:	141 g
Styl noszenia:	Opaska na głowę
Rekomendowane użycie:	Scena/studio
Typ zestawu słuchawkowego:	Stereofoniczny
Czas gotowości:	400 h
Źródło ładowania:	USB
Czas odtwarzania muzyki:	30 h
Technologia łączności:	Bezprzewodowy
Bluetooth:	Tak
Profile Bluetooth:	A2DP, AVRCP, HFP, HSP
Wersja Bluetooth:	5.0
Zasięg bezprzewdowego router'a:	10 m
Budowa słuchawek:	Supra fonetyczny
Pasmo przenoszenia:	20 - 20000 Hz
Impedancja:	32 Ω
Czułość mikrofonu:	-38 dB
Średnica głośnika:	40 mm
Pojemność baterii:	400 mAh
Technologia baterii:	Litowo-polimerowy (LiPo)
Szybkie ładowanie:	Tak
Przewody:	Micro-USB
Rodzaj baterii:	Wbudowana bateria
Regulacja głośności:	Przycisk
Ustawienia korektora:	Tak
Możliwość złożenia:	Tak
Złącze 3,5 mm:	Nie
Połączenie USB:	Tak
Akumulatorek:	Tak
Przewodnik głosowy:	Tak
Złącze USB:	Micro-USB
Zasilany baterią:	Tak
Rodzaj magnesu:	Neodym
Typ sterownika:	Dynamiczny
Szybki czas ładowania:	10 min
Żywotność baterii (szybkie ładowanie):	1 h