Instrukcja obsługi JL Audio XDM1000/5

JL Audio Receiver XDM1000/5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio XDM1000/5 (19 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
1000W 5-CHANNEL SYSTEM A MPLIFIER
OWNERS MANUA L
MANUEL D’U T I LISATIO N
MANUA L DE L PRO PI E TARIO
BEDI E NUNGSANLEITU NG
MANUA L E DE L PRO PR IE TARIO
2 | JL Audio® - XDM1000/5
x1 2.5 mm
x1 x1
4 | JL Audio® - XDM1000/5
INSTALLATION CONSIDER ATIONS
Installation requires appropriate tools and
safety equipment. Professional installation
is recommended.
This product is water-resistant.
Do not submerge or subject to
high-pressure water spray.
Before installation, turn off the audio
system and disconnect the battery
system from the audio system.
When possible, install in a dry, well-ventilated
location that does not interfere with factory-
installed systems. If a dry environment
is not available, a location that is not
exposed to heavy splashing may be used.
Do not install in the engine compartment,
any areas of extreme heat or where it will
be directly exposed to the elements.
Before cutting or drilling, check for potential
obstacles behind mounting surfaces.
Carefully route all system wiring away moving
parts and sharp edges; secure with cable ties
or wire clamps and use grommets and loom
where appropriate to protect from sharp edges.
SAFETY CONSIDERATIONS
Only use this product with 12 volt, negative-
ground electrical systems. This product is
not certified or approved for use in aircraft.
Mount this product securely to prevent
damage or injury in severe conditions.
An appropriate fuse (or circuit breaker) at
the main power wire is vital for vehicle/vessel
safety and must be installed within 18 inches
(45 cm) of the positive battery connection.
For ABYC and NMEA applications,
circuit protection is required within 7
inches (18 cm) of the battery, unless the
cable is in an enclosure or conduit.
Listen to your audio system at
levels appropriate for operating
conditions and hearing safety.

Specyfikacje produktu

Marka: JL Audio
Kategoria: Receiver
Model: XDM1000/5

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio XDM1000/5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver JL Audio

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Sunstech

Sunstech DTBP700HD2 Instrukcja

30 Września 2024
Sunstech

Sunstech DTB210HD2 Instrukcja

30 Września 2024
Dual

Dual DMCPA70BT Instrukcja

30 Września 2024
Arcam

Arcam A5 Instrukcja

30 Września 2024
Pyle

Pyle PHDA6BT Instrukcja

29 Września 2024
Naim

Naim Nait 50 Instrukcja

29 Września 2024
Pyle

Pyle PDA77BU Instrukcja

29 Września 2024
CYP

CYP QU-8MS Instrukcja

29 Września 2024
Stewart

Stewart CVA50MX-1 Instrukcja

29 Września 2024
CYP

CYP AU-A300-HBT Instrukcja

29 Września 2024