Instrukcja obsługi JL Audio MHD900/5

JL Audio Receiver MHD900/5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio MHD900/5 (13 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
owner’s manual
5-Channel Class-D Marine System Amplifier
Thank you for purchasing a JL Audio amplifier for
your marine sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vessel.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
2 | JL Audio - MHD900/5 Owners Manual
PROTECT YOUR HEARING!
We value you as a long-term customer. For
that reason, we urge you to practice restraint in
the operation of this product so as not to damage
your hearing and that of others in your vessel.
Studies have shown that continuous exposure to
high sound pressure levels can lead to permanent
(irreparable) hearing loss. This and all other
high-power amplifiers are capable of producing
such high sound pressure levels when connected
to a speaker system. Please limit your continuous
exposure to high volume levels.
While driving, operate your audio system in
a manner that still allows you to hear necessary
noises to operate your vessel safely (horns,
sirens, etc.).
SERIAL NUMBER
In the event that your amplifier requires
service or is ever stolen, you will need to have
a record of the product’s serial number. Please
take the time to enter that number in the space
provided below. The serial number can be found
on the bottom panel of the amplifier and on the
amplifier packaging.
Serial Number:
INSTALLATION APPLICATIONS
This amplifier is designed for operation in
vessels with 12 volt, negative-ground electrical
systems. Use of this product in vessels with
positive ground and/or voltages other than 12V
may result in damage to the product and will void
the warranty.
This product is not certified or approved for
use in aircraft.
Do not attempt tobridge” the outputs of this
amplifier with the outputs of a second amplifier,
including an identical one.
PLANNING YOUR INSTALLATION
It is important that you take the time to read
this manual and that you plan out your
installation carefully. The following are some
considerations that you must take into account
when planning your installation.
F yilter equencFr
S relecto
(pg. 11)
Infrasonic Filter
S relecto
(pg. 11)
Filter eFr
Selec
(pg. 1
I ynput Sensitivit
Control
(pg. 10)
Filter Slope
Selection
(pg. 11)
I ynput Sensitivit
Control
(pg. 10)
Power Status
I rndicato
(pg. 15)
Left & Right
Input Jacks:
Subwoofer
(pg. 9)
Left & Right
Input Jacks:
Front Channels
(pg. 9)
Jack for
R lemote Leve
Control Knob
(pg. 13)
Left & Right
Input Jacks:
Rear Channels
(pg. 9)
Chassis Ground
Connec rto
(pgs. 6-7)
Remote Turn-On
Connec rto
(pgs. 6-7)
+12 V wer Po
Connec rto
(pgs. 6-7)
4 | JL Audio - MHD900/5 Owners Manual
ProduCt desCriPtion
The JL Audio MHD900/5 is a very powerful
and compact five-channel amplifier utilizing
patented Single Cycle Control™ Class D
technology for all channels. This groundbreaking
technology delivers reference-grade, full-
range sonic performance while requiring
far less current from the vessel’s electrical
system than a conventional amplifier.
JL Audio’s exclusive R.I.P.S. power supply
design optimizes the output of each channel
section for any impedance between 1.5 and 4
ohms per channel (3-8 ohms bridged on front
and rear sections) allowing you to get full use of
the MHD900/5’s performance capabilities with a
wide range of speaker systems.
The tightly regulated power supply design also
means that the MHD900/5s clean power output
capability remains stable over a wide range of
vessel voltages, resulting in enhanced fidelity.
The MHD900/5 flexible, studio-grade signal
processing allows it to be deployed in several
different system configurations:
1) As a five-channel amplifier in a bi-amplified
system, driving four satellite speakers (100W x
4), plus a subwoofer system (500W x 1).
2) As a very powerful three-channel amplifier
in a bi-amplified system, driving two satellite
speakers (150W x 2, bridged), plus a subwoofer
system (500W x 1).
3) As a five-channel amplifier in a tri-amplified
system, driving two tweeters (100W x 2), plus
two woofer/mids (100W x 2), plus a subwoofer
system (500W x 1). An external 2-way
crossover is required for this application.
The MHD900/5s flexible input and
crossover sections permit operation with
a wide variety of source units and system
configurations. It can be operated with a single
pair of stereo inputs, with two pairs of stereo
inputs (front and rear) or with separate inputs
for its front, rear and subwoofer channels.
As we said, it’s very flexible.

Specyfikacje produktu

Marka: JL Audio
Kategoria: Receiver
Model: MHD900/5

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio MHD900/5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver JL Audio

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Sunstech

Sunstech DTBP700HD2 Instrukcja

30 Września 2024
Sunstech

Sunstech DTB210HD2 Instrukcja

30 Września 2024
Dual

Dual DMCPA70BT Instrukcja

30 Września 2024
Arcam

Arcam A5 Instrukcja

30 Września 2024
Pyle

Pyle PHDA6BT Instrukcja

29 Września 2024
Naim

Naim Nait 50 Instrukcja

29 Września 2024
Pyle

Pyle PDA77BU Instrukcja

29 Września 2024
CYP

CYP QU-8MS Instrukcja

29 Września 2024
Stewart

Stewart CVA50MX-1 Instrukcja

29 Września 2024
CYP

CYP AU-A300-HBT Instrukcja

29 Września 2024