Instrukcja obsługi JL Audio FiX 86

JL Audio Konwerter audio/wideo FiX 86

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio FiX 86 (36 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
Thank you for purchasing a JL Audio FiX™ OEM
interface / processor for your automotive sound system.
This product has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your FiX™ processor installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product without compromising
your vehicle’s functionality. Due to the complexity of modern vehicle
systems, we do not recommend self-installation unless you have extensive
experience in automotive electrical systems. Should you decide to install
this product yourself, please take the time to read this manual
thoroughly to familiarize yourself with its installation requirements
and setup procedures.
If you have any questions regarding the instructions in this manual or
any aspect of the product’s operation, please contact your authorized JL
Audio dealer for assistance. If you need further assistance, please contact
the JL Audio Technical Support Department at technical@jlaudio.com
or call (954) 443–1100 during business hours.
OWNER’S MANUAL
Protect Your Hearing!
We value you as a long-term customer. For that reason, we urge you to practice
restraint in the operation of this product so as to not damage your hearing and
that of others in your vehicle. Studies have shown that continuous exposure
to high sound pressure level can lead to permanent (irreparable) hearing loss.
Automotive sound systems are capable of producing such high sound pressure
levels. Please limit your continuous exposure at high volumes. While driving,
operate your audio system in a manner that still allows you to hear necessary
noises to operate your vehicle safely (horns, sirens, etc.).
Installation Applications
This product is designed for operation in vehicles with 12 volt, negative-ground
electrical systems. Using this product in systems with positive ground and/or
voltages other than 12 volts may result in damage to the product and will void
the warranty. This product is not certified or approved for use in aircraft.
Safety Considerations
• Install this product in a dry, well-ventilated location that does not interfere
with your vehicle’s safety equipment (air bags, seat belt systems,
ABS brake systems, etc.).
• Securely mount this product so that it does not come loose in the event of a
collision or sudden jolt to the vehicle.
• Check before drilling to make sure that you will not be drilling into a gas tank,
brake line, wiring harness or other vital vehicle system.
• Do not run system wiring outside or underneath the vehicle. This is an
extremely dangerous practice, which can result in severe damage/injury.
• Protect all system wires from sharp metal edges and wear by carefully routing
them, tying them down and using grommets and loom where appropriate.
What’s Included
(1) FiX™ 86 processor
(1) 5-pin Power Connector plug
(4) 4-pin OEM Analog Input plugs
(4) Mounting screws
(1) FIX™ Calibration CD
(1) User manual
Product Overview
The FiX™ 86 is the ultimate tool for building a great sounding system using the
OEM source. Equipped with a powerful 24-bit DSP processor, the FiX™ 86 delivers
world-class sound and incredible functionality allowing the integration of
complex factory source units with aftermarket audio equipment. It combines a
level matching, summing preamp with delay and frequency response correction,
all housed within a single chassis.
The FiX™ 86 may be used to perform the following functions:
1. Eight differential-balanced inputs accept virtually any OEM analog audio
signal, from low-voltage, line-level signals to high power, amplified speaker-
level signals. FiX™ 86 automatically level-adjusts and converts each OEM
input signal to digital audio with 24-bit effective resolution.
2. Any time delays between the OEM input signals are automatically
synchronized.
3. FiX™ 86 is compatible with full-range or band-limited OEM signals. Multiple
band-limited OEM input signals are automatically summed into full-range
signals. FiX™ 86 will sum up to 3-way front and 2-way rear signals.
4. After summing, FiX™ 86 will measure the frequency response of the Front
L&R and Rear L&R summed signals and automatically equalize them to a flat
frequency response. These digital-domain corrections can vary from subtle
to dramatic, depending on the amount of equalization engineered into the
factory audio system.
5. A simple calibration process initiates the automatic level adjustment, time
correction, signal summing and equalization tasks.
6. Once calibrated, the FiX™ 86 delivers corrected analog signals to your
aftermarket signal processor or amplifier(s) via six low-distortion, line-level
RCA-type outputs with 4-volt (RMS) capability. Front L&R, Rear L&R and non-
fading (front + rear) subwoofer outputs permit retention of the OEM fader’s
functionality while also offering dedicated subwoofer outputs.
7. Differential-balanced input architecture ensures noise immunity and
compatibility with most analog output OEM source units or amplifiers.
8. Selectable turn-on options for activation include: conventional 12-volt
trigger, automatic via Signal-Sensing or automatic via DC Offset-Sensing.
9. FiX™ 86 provides a dedicated remote turn-on voltage output for activating
aftermarket amplifiers or signal processors.
10. JLid™ Controller Port allows connection of the optional DRC-100 or DRC-200
Digital Remote Controllers (each sold separately), adding Master Volume
Control and/or Subwoofer Level Control, Handsfree Optimization Mode and
LED Status Reporting capabilities from the driver’s seat.
11. USB port provides access to update firmware and advanced options.
The FiX™ 86 can be used as a standalone integration device, sending
crystal-clear audio to your amplifiers, or as a gateway to world-class sound by
using it with our TwK™ System Tuning DSP (sold separately).
Planning Your Installation
It is important that you take the time to read this manual and that you plan
your installation carefully. It is very easy to damage expensive vehicle systems
in modern automobiles. Never assume that you have found appropriate wires
without consulting a reliable wiring diagram or without performing signal
testing with proper test equipment. If you are uncomfortable or unfamiliar with
reading diagrams or testing signals, please enlist the services of your authorized
JL Audio dealer to perform the installation.

Specyfikacje produktu

Marka: JL Audio
Kategoria: Konwerter audio/wideo
Model: FiX 86

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio FiX 86, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konwerter audio/wideo JL Audio

JL Audio

JL Audio TwK 88 Instrukcja

2 Września 2024
JL Audio

JL Audio FiX 82 Instrukcja

21 Sierpnia 2024
JL Audio

JL Audio LoC 22 Instrukcja

15 Sierpnia 2024
JL Audio

JL Audio FiX 86 Instrukcja

6 Sierpnia 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Tripp Lite

Tripp Lite P569-006-IND2 Instrukcja

15 Stycznia 2025
AJA

AJA 12G-AMA Instrukcja

15 Stycznia 2025
AJA

AJA FIDO-T-MM Instrukcja

15 Stycznia 2025
AJA

AJA OG-FIDO-TR Instrukcja

15 Stycznia 2025
INOGENI

INOGENI U-CAM Instrukcja

14 Stycznia 2025
D-Link

D-Link AirPremier DWL-1800 Instrukcja

13 Stycznia 2025
StarTech.com

StarTech.com ST122VGA Instrukcja

10 Stycznia 2025
D-Link

D-Link DMC-300M Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-GSFP Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-FSFP Instrukcja

9 Stycznia 2025